Used Mabo Unic Horizontal Drilling Machine for sale (66,641)

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, Nwsdpfopumdcjx Abijk mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: refurbished (used), Machine is located at our premises in Burscough. We welcome any inspections prior to sale. Nwsdpfx Aezwmrljbijk Spindle Diameter 4" / 101.6mm Spindle Taper 50 INT Main spindle travel 30" / 762mm Spindle speeds 10 - 1300rpm Vertical Y Travel - 48" / 1219mm Main Motor 25 HP Equipment - Facing head, outer (tailstock) steady Vast amount of tooling, rotary table, angle plates. DRO Pendant control This machine has undertaken a full machine rebuild and all slides re ground. Exceptional condition

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min Nwjdpfxszwg Tij Abiek - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2010, Maximum drilling diameter: 20 - 252 mm Drilling diameter in concrete: 20 - 150 mm Number of gears: 3 Nwsdoznvrpepfx Abisk Electrical connection: 220 V, 2300 W Weight: 7.4 kg

Condition: used, machine/vehicle number: 008687, Max. panel width: 1000 mm Max. panel length: 2500 mm No of Bottom Units: 8 Nsdpfxszmmt Ie Abiewk Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Tapping function, Drill unit feed - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Njdpezwc Sbsfx Abiewk VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1993, Used machine Nwsdpfxew I Uy Ts Abijk Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 Nodpfog U Uv Usx Abiewk EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm morse taper 3 MK Njdpfsxabxrox Abiewk turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: excellent (used), max. wheel diameter 130 mm gear width 180 mm Nodpfey Umizsx Abijwk max. module 2,5 min. module 0,3 turning speeds 140 - 900 U/min min. number of teeth 4 clamping length max. 200 mm Control Siemens max. workpiece diameter 80 mm total power requirement 3,5 kW weight of the machine ca. 2,9 t dimensions of the machine ca. 1,8 x 1,6 x 1,9 m

Condition: used, Year of construction: 2015, operating hours: 19,402 h, total height: 2,250 mm, total length: 2,500 mm, total width: 1,900 mm, Colour: White Empty weight: 1.600 kg Price: On request - Year: 2015 - Documentation available: Yes - └ Type Documentation: User manual, Electrical diagrams, Technical data, Operating system - CE marking present: Yes - CE certificate present: No - Serial number: AB/224221 - Operating hours: 19402 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 1 - - Max. spindle speed [rpm]: 18000 - - Main motor power [kW]: 5.6 - Type milling table: Flat table Nwjdpozmvftofx Abiok - Tool holder: ISO30 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 11 - Saw unit present: Yes - Tool changer positions [pcs.]: 0 - System/software: SCM Maestro - Safety feature: Door interlock switches, Safety light curtain - Tools included: Yes - CNC options: Barcode reader, Manual control - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 3960 - Table width [mm]: 840 - Working range X [mm]: 3050 - Working range Y [mm]: 900 - Z-axis working range [mm]: 60 - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 10.0 - Installed length [mm]: 4500 - Installed width [mm]: 1900 - Installed height [mm]: 2250 - Transport dimensions: 2500mm x 1900mm x 2250mm (l x w x h) - Transport weight [kg]: 1600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Nwodpfxoxwaz Hs Abiok

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Nwedpfoxnlfljx Abijk

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Nedpfx Abjy Hf Rusiewk Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm Nedpfxjy Hf N Re Abiowk 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7401.09 € 142.84 € 20 mm MK 3 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: Nsdpfxoy Hf N De Abiowk - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Nodpfxsynncze Abijwk Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu Nodpfjynmz Aox Abiowk ca. 2 - 4 Wochen ab Auftr Deutschland 5309.85 € 102.48 € 18 mm MK 2 240 mm 30 - 3000 U/min 0.75 kW M12 (steigungsabhängig) 705 mm 355 mm 1825 mm 195 kg manuell mm/U 82 mm 180 - 870 mm 340 x 280 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 18/20 (in E335/ST60) Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Manual feed EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Nwodexcg Ecspfx Abijk Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15441 € 296.47 € 40 mm MK 4 300 mm 1,5 / 3,0 kW M30 610 mm 850 mm 1920 mm 440 kg 0 - 300 mm/U 160 mm 125 mm 150 - 700 mm 590 x 450 mm PV - DISPLAY WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Selection of operating mode: manual drilling / drilling with feed / tapping - Infinitely variable speed adjustment - Feed rate setting - Zero point setting - Drilling depth setting - Piece counter - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode - Chip breaking mode(option, price on request) - Jump switch mode, for efficient drilling of square tubes (option, price on request) Drilling capacity / normal drilling performance 35/40 (in E335/ST60) Automatic feed Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Connection cable (1.5 m) with CEE plug Nsdpezv Ezcjfx Abiowk Drill protection with electr. Fuse Thermal overload protection 3 years warranty for single shift operation Digital drilling depth, speed and feed rate display Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M30, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching LED lighting as standard Art. - Nr. 207.208 R1(100-2.000 1/min) + cover black Art. - Nr. 207.226 R1(100-2.000 1/min) + cover transparent Art. - Nr. 207.209 R2 (70-.1.400 1/min) + cover black Art. - Nr. 207.227 R2 (70-.1.400 1/min) + cover transparent OPTIONS: Drill package (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 Njdpfx Aboxcg D Ejiewk 030140 prompt, Zwischenverkauf v Deutschland 13429.36 € 257.84 € 1 30 mm MK 3 280 mm Stufe 1: 125 - 2000; Stuf U/min 0,9 / 1,45 kW kW M20 820 mm 520 mm 1900 mm 320 kg 0 - 300 mm/U 240 - 790 mm 420 x 340 mm 125 mm PV - DISPLAY WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Selection of operating mode: manual drilling / drilling with feed / tapping - Infinitely variable speed adjustment - Feed rate setting - Zero point setting - Drilling depth setting - Piece counter - Spindle stop (automatically stops the spindle after the drilling cycle) - Free cutting time mode - Chip breaking mode(option, price on request) - Jump switch mode, for efficient drilling of square tubes (option, price on request) Drilling capacity / normal drilling performance25/30 (in E335/ST60) Automatic feed Digital speed-, drilling depth and feed display Drilling depth adjustment with fine adjustment and undervoltage trigger EMERGENCY STOP pushbutton Stepless speed control Table height adjustment via toothed rack Connection cable (1.5 m) with CEE plug Drill protection with electr. Fuse Thermal overload protection Electronically infinitely variable feed incl. Spindle monitoring Free cutting device Thread cutting device, thread cutting capacity max. M20, setting the thread cutting depth via digital depth display Drilling depth shut-off; programmable; easy operation Drilling cross with pushbutton for feed on/off switching Optional transparent or black protective hood (stock machine transparent) LED lighting as standard OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,020 mm, controller model: Pro 5, table load: 1,200 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,900 h, coolant supply: 40 bar, spindle nose: HSK100, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, Very well-maintained machine with a low number of operating hours. The machine was purchased and installed in 2013. IKZ 40 bar and air. Tool center point control, tilted workplane, Die & mold package, extended memory, extra zero points. Lots of accessories, pallets, cubes, vises, HSK holder, shrink holder. Njdpfx Aozw Efksbiowk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 10 h, input voltage: 400 V, input frequency: 50 Hz, total width: 1,487 mm, total length: 4,440 mm, overall weight: 1,900 kg, Equipment: documentation/manual, For sale: a practically unused vertical double-spindle glass drilling machine Expoglass PRIAM, year of manufacture 2023. The machine has drilled just under 300 holes — condition as new, like factory-fresh. Fully designed and manufactured in Poland by Expoglass. This is the latest version of the machine — technically almost identical to a new unit (current price of a new machine: EUR 39,000 net). Included in the price of EUR 29,000 net: software update to the latest version inspection including calibration optional installation at the buyer's site and operator training 6 months warranty on wear and mechanical parts Transport not included. The machine can be inspected on site at the current owner's premises. Advantages: automatic serial drilling of up to 20 holes very simple operation, minimal training time high machining precision — minimises glass cracking and chipping hole chamfering function modular design for fast servicing Technical data: Parameter Value Year of manufacture 2023 Holes drilled approx. 300 Length 4440 mm Height (operating) 2793 mm Height for transport 2100 mm Width 1487 mm Weight 1900 kg Communication 7" HMI panel + analogue buttons Spindle feed automatic, servo-stepper Feed control electronic Loading bar control electronic Nwedpfx Aszv Dunobijk Spindle speed 700–2800 RPM Drill tip position measurement automatic Drill change with table lowering and spindle lock Spindle depth setting electronic (calculated by controller) Horizontal positioning double-row manual stop system Number of manual stops 6 pcs Material clamping pneumatic Hole chamfering function yes, electronically controlled Drill magazine capacity 70 drills Drill diameter measurement accuracy up to ±5 mm Glass thickness measurement accuracy up to 0.4 mm Loading bar positioning accuracy up to 0.7 mm Serial drilling yes, up to 20 holes Max. glass weight 200 kg (centred; max. 130 kg per half of the bar) Max. drilling height 1050 mm Recommended drills thin-wall "CHAMPION" L=75 mm Online remote support yes

Condition: used, Horizontal Boring Machine CORNAC C100 Travel X: 1000 mm Travel Y: 1000 mm Travel Z: 1260 mm Fixed table Cone: SA 50 Spindle: Ø 100 mm Spindle exit: 550 mm Rotation: from 10 to 1250 RPM Table size: 1550 x 980 mm Surfacing plate: Ø 520 mm Spindle motor: 9,5 kW Scale 3 axes HEIDENHAIN Automatic Feeds: X - Y - Z Supplied with a set of cones Voltage: 380 V Dimensions (L x W x H): 4500 x 2100 x 2450 mm Nodpfx Abezw Azpoiowk Weight: approx 8 T

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Nsdpszw Azcefx Abijwk Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG