Used Mütek Shark for sale (141)

Condition: good (used), Clean air extraction system Hederb D Nopfx Aa Ejnp Used machine, in good condition Images to follow mobil Jet 160, Connection 160, Fan 2.2 kW Air flow rate 1850 m³/h, 400 V

Condition: new, Year of construction: 2026, Single-shaft shredder MRZ 530 Hsdpfx Aaed Db N Io Eenp Included: + Profile rotor for increased throughput Options: Double knife row + €895 net Veneer and paper scraper + €970 net * recommended for extremely thin materials with a thickness of less than 3 mm Our mütek single-shaft shredder MRZ 530 shreds a wide variety of materials, such as residual wood of all kinds, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard and plastics. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. We would be happy to provide you with a free test using your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 phase, Knives: multiple rotation, Rotor diameter: 260 mm, Control: Siemens S7-1200 PLC, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 m³, Throughput 1 - 5 hopper loads / h, Hydraulically operated slide, Screen size as required (10 - 40 mm), Suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30% (oven-dry). Standard included: • Fast hydraulics • Profile rotor • Control cabinet with Siemens PLC control • Automatic star/delta start • Automatic OFF when the rotor is idle • Removable suction chute • Speed 70 - 100 rpm for higher throughput • Cyclic control to avoid idle times • Performance-enhancing step control of the hydraulic slide • Stable guides for the hydraulic slide Further shredder options: - Raise the shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt + €8,770 net Horizontal part: 1200 mm Ascending part: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the input/raw material: - The moisture content (oven-dry) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3-phase Blades: multiple, rotatable Hydraulically operated slide Screen opening as desired (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features include: - Automatic star/delta starter - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF boards, and other materials after testing and approval by the manufacturer. Additional shredder options: Heded Dgw Uopfx Aa Eenp - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Rising section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-band magnet + €5,980 net - Control system for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - Moisture content (as received) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear Hsdpfx Aod Nnwlja Esnp --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Year of construction: 2025, condition: new, to sell the demonstration machine at a special price Our MVZ 7.5 granulator is suitable for shredding thin-walled parts and/or for post-shredding wood chips. More details after a test with your material. Larger systems are also available as an option The price is only for the shredder as shown in picture 1 - fan, cyclone and filter are options. Motor: 7.5 kW *larger systems on request (4 to 75 kW) Throughput up to 120 kg/h *depending on screen and material Much higher throughput rates can be achieved with the secondary shredding of wood chips. Details after the test with about 30 kg. Rotor diameter: 180 mm 6 rotary knives each 225 mm 4 stationary knives each 225 mm Dimensions: 930x730x1420mm Hnjdpjd N Dn Defx Aa Ejp weight: 450 kg, suction nozzle: 100 mm, Screens: 6.8 and 15 mm - other screens available, Price per sieve: €390. Price set replacement knife: 579 € Suitable e.g. fur: - Plastic waste of all Art.-No Various materials - HDPE, LDPE, PP, PS. PC, PA - biomass -Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood. Another machine, available immediately (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hsdped E R D Ssfx Aa Eonp Hopper volume approx. 0.6 m³, Hydraulically operated slide Screen size optional (12 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segment bottom + €2,170 net (prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks) Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net Hedpfjgmfa Ajx Aa Eenp (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Hnodpfetqfhxox Aa Eep Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 Hnodpodv Eu Hofx Aa Eop If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Hnodpoff Sbiefx Aa Esp Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Hnsdpfewzarcox Aa Eep Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: good (used), Refurbished machine *Options at additional cost, see below with a full 1 year warranty Ready for delivery approx. 16 weeks after ordering Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Options: -Silo for MAP series Storage silo above the machine - Contents approx. 6 square meters, stable steel construction with agitator discharge and level indicator. 19,700 € net plus VAT. *only possible for one presse MAP 1200 below the silo if you need to place two machines MAP 1200 below one silo it needs to be build completely different. the price for this silo is 37.900 € net -Temperature control device for the pressing tools to maintain the temperature for optimal briquette size. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - must be left for operation including corresponding control € 7.850 net Oil heater Hnsdpfs E Dqujx Aa Eep 1.950 € net -Guillotine, to cut the briquettes to length Create a compressed air connection on site € 6,940 net plus VAT -Transport line / cooling section (nominal value: 4x2m) 990 euros net per 2 meters - Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Hodex Tfdhjpfx Aa Ejnp Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 Hodpfx Aaezb Iuqo Eonp -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: like new (used), Semi-automatic, electro-hydraulic band saw Blade dimensions: 2950x27x0.9mm Hsdpezlimbofx Aa Ejnp The saw is suitable for cutting solid metals and metal profiles with medium cross-sections up to 280x200 mm at an angle of 0°; Cutting angle range: from 0° to 60° to the left; WITH ADDITIONAL EQUIPMENT - manual and manually dynamic cutting cycle Year of manufacture: 2025

Condition: excellent (used), Year of construction: 2004, Features Machine type: CNC automatic bandsaw Cutting angle: 0° (straight cut) Maximum round stock capacity: Ø 300 mm Maximum square stock capacity: 250 × 250 mm Maximum rectangular stock capacity: 330 × 250 mm Blade dimensions: 3650 × 27 × 0.9 mm Blade motor: 2.2 kW three-phase Blade speed: Variable, approximately 15–100 m/min via inverter Maximum clamping opening: 335 mm Bar feed: Automatic CNC with feed clamp Hnsdpfx Ajzkubuea Eep Power supply: 400 V three-phase (50 Hz) Operating cycles: Manual, semi-automatic and programmable automatic

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment Hedpfx Aaszkbn Uj Eonp * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: good (used), Year of construction: 2015, 1 used miter band saw Manufacturer: MEP Type: Shark 512 SXI EVO Year of manufacture: 2015 Technical data: Design: Semi-automatic double miter metal band saw Miter range: -60° to +60° Max. cutting capacity at 0°: 510 × 320 mm Saw band dimensions: 4,640 × 34 × 1.1 mm Band speed: 15–100 m/min (continuously variable) Hnsdpfxszlgmls Aa Eep Drive power: 4.0 kW Vise opening: 515 mm Machine weight: approx. 1,190 kg with various roller conveyors

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Hnedezi Ackepfx Aa Eep Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: used, Year of construction: 2013, functionality: limited functionality, operating hours: 8,406 h, cutting height (max.): 230 mm, cutting width (max.): 245 mm, total height: 1,680 mm, total width: 1,950 mm, overall weight: 1,000 kg, Y-axis feed length: 500mm Saw blade length: 2950mm Saw blade width: 27mm Maximum cutting length: 9999mm Space requirement (height): 2100mm Space requirement (width): 1950mm Table length: 2800mm Table width: 245mm Working height: 890mm Further technical details can be found in the operating and maintenance manual, which will be provided with the purchase. If you have any further questions, please do not hesitate to contact us by email or telephone. Sincerely, Weber Railing Systems Hedpfx Aajzkufmj Ejnp

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 380x250 mm 260 mm 250 mm 300x200 mm 180 mm Hedpfsyv Ntrox Aa Eonp 170 mm 200x170 mm 240 mm 210 mm 280x160 mm dimensions of saw-band 3770x27x0,9 mm speed 40/80 m/min 385 mm total power requirement 1,5/1,8 kW weight 695 kg

Condition: new, 36/72 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm capacity 45 degrees: round 260/200 mm capacity 45 degrees: square 250/180 mm capacity 45 degrees: flat 270x200/200x160 mm dimensions of saw-band 3650x27x0,9 mm total power requirement 1,5/1,8 kW Overall size 2130x1400x1950 mm Weight 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Hnjdsyv Nmlspfx Aa Eop Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start over the hand switch. Upper position is saved automatically.

Condition: new, dimensions of saw-band 3320x27x0,9 mm 40/80 m/min 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm 260 mm 250 Hnodoyv Na Sspfx Aa Esp 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm 200 mm 180 mm 200x160 mm weight of the machine ca. 640 kg dimensions of the machine ca. 2140x1300x1950 mm

Condition: new, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW weight 1240 kg vice 340 mm dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Hjdpjyv I Syofx Aa Esnp Späneräumbürste and emulsion coolant pump as standard.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Equipment: lighting, We are offering this excellent MEP SHARK 332 RC KONNECT bandsaw, manufactured in 2021. Because this exceptionally well-maintained Mep bandsaw machine is now for sale, I am looking for seriously interested buyers for this nearly new machine. Hsdpoziip Dofx Aa Eonp This saw can automatically cut miters to the left and right and is fully programmable. It is also equipped with an automatic loading station. If you are seriously interested or would like to arrange a viewing, please contact us. If you have any questions or would like more information, please feel free to send us a message or call us.