Used L-Tec Fc-4 for sale (94,980)

Condition: used, Year of construction: 2022, functionality: limited functionality, Complete, industrially manufactured water treatment system for ultra-pure, demineralized water, 400 l/h (< 3 µS/cm, depending on the raw water), delivered in December 2022. Multi-stage: raw water filter Berkofin KS25 HWS, compact demineralization ion exchanger BerkeSOFT midi 2-45, reverse osmosis Terion-S 500 with pressure pump/membrane modules, electrodeionization (CEDI), NaOH dosing for CO₂ removal, UVC sterilization Aquafides 1AF4+. 980-liter pure water storage tank with E+H Levelflex FMP51 and capacitive level sensors. Frequency inverter-controlled pressure boosting, 2 m³/h at 6 bar. High-quality industrial components (including KSB, Grundfos, Calpeda, WIKA, Bürkert, Balluff). Technical data: - Capacity 400 l/h, < 3 µS/cm; RO membrane set valid until 28.07.2025 (approx. 265 m³ treated) Nedpozmap Njfx Ag Rewn - UV lamp replaced on 01.10.2025 (approx. 5,350 operating hours); storage tank 980 l; pressure boosting 2 m³/h at 6 bar, frequency-controlled - Note: CEDI unit currently defective/clogged, capacity currently ~20 l/h; repair offer dated 24.09.2025 is available. Extensive documentation and manuals are available. More systems and equipment are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of the customer through the Köck auction house. Located in eastern Austria, exact address upon request. Collection/dismantling by the buyer.

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Nedpsz Rvftefx Ag Rewn Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). Nwjdpfx Ajz Rvfysg Rjn You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2016, total width: 2,470 mm, total height: 1,420 mm, suspension: air, tire size: 385/55-R22.5, wheelbase: 8,820 mm, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = 2016 D-TEC PORTMASTER 45FT HC chassis with ABS/EBS, BPW axles with drum brakes, 1st axle = lift axle, extendable at the front and rear, 45 ft/40 ft/30 ft/20 ft/2x20 ft, unladen weight: 4,904 kg, permissible total weight: 43,000 kg, tires 385/55-R22.5 (L: 7/8/6 mm; R: 7/7/6 mm), Dutch registration WARNING: ABS module defective! = Further Information = General Information Year of construction: 2016 Registration number: OP-14-GV Nwodpfx Ags Ad Nngs Rsn Axle Configuration Tire size: 385/55-R22.5 Axle brand: BPW Drum Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 45%; Tire tread right: 45% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 50%; Tire tread right: 45% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Weights Unladen weight: 4,904 kg Payload: 38,096 kg GVW: 43,000 kg Functional Body brand: D-TEC PORTMASTER Extendable body: Yes Condition Technical condition: average Optical condition: very good Damage: none Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2014, total width: 2,470 mm, suspension: air, tire size: 385/55-R22.5, color: black, Year of construction: 2014, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = Nice 2014 D-TEC FLEXITRAILER 45FT HC chassis, BPW axles with drum brakes, ABS/EBS, 1st axle = lift axle, 3x extendable (front, center, and rear), 1x 20FT, 2x 20FT, 1x 20FT center, 1x 30FT, 1x 40FT, 1x 40FT HC, 1x 45FT HC, unladen weight: 4,962 kg, permissible total weight: 43,000 kg, 385/55-R22.5 tires (R: 6/6/5mm; L: 5/6/5mm)), Dutch registration. = Further Information = Axle configuration Tire size: 385/55-R22.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 35% Rear axle 2: Max. axle load: 9000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread left: 35%; Tire tread right: 35% Weights Unladen weight: 4,962 kg Payload: 38,038 kg GVW: 43,000 kg Functional Body brand: D-TEC FLEXITRAILER Extendable body: Yes Condition Nwjdpfx Aszxgvgsg Rjn Technical condition: very good Optical condition: very good Identification License plate: ON-18-JZ Further information Please contact Arne Honingh for more information.

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack granules (sugar, salt, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), swing cup volume filling device for granules. - Specifications: max. speed of the machine in neutral: 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nwodpfx Ajv Nmc Seg Ron Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 8 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: 3-/4-side sealing - surcharge applies) to pack normal liquids (water, vinegar, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), piston Pump with 60 liter hopper. - Specifications: max. speed of the machine in neutral: 8x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-50)mm; power: 220V, 5.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1700xW1400XH1900mm; weight: 650kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nsdpfxjv Nmfae Ag Rown

Condition: new, Year of construction: 2025, Vertical packaging machine including dosing system(s) with 4 manufacturing lanes to produce "stick-packs" with back center sealing (alternativ: with 3-/4-side seal - surcharge applies) to pack powder (pepper, milkpowder, etc.) - OMRON PLC and colour touchscreen, auto diagnostics. AIRTAC pneumatic parts, OMRON temperatur PID, SCHNEIDER and OMRON electronic parts. Film pulling, AB converter control, stainless steel version (SS304), auger filler with servo motor, with hopper. - Specifications: accuracy: +/-0,3-1%; max. speed of the machine in neutral: 4x60 cycles/minute; accuracy: +/-10%; suitable for all BOPP/PE and laminated films; bag sizes: L(50-350)xW(10-100)mm; power: 220V, 3.5kW; compressed air: 1.5m³/min, 6bar; machine dimensions: L1500xW1300xH1900mm; weight: 450kg. Nwjdov Nmftspfx Ag Ron That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, 4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min); bag sizes: L(50-250)xW(55-102)mm; film width: 520-900mm; power: 380V, 6,3kW; compressed air: 1,4m³/min, 6bar; machine dimensions: L1800xW1600xH1760mm. Nwedpfx Aev Nmx Tsg Rsn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, This listing is for the BioQuell L-4 OPTI The unit is in full working condition and is ready for immediate use The BioQuell L-4 OPTI is a versatile, mobile hydrogen peroxide vapor (HPV) generator that's used for the biodecontamination of various areas and equipment, including isolators, hoods, freeze dryers, and even entire rooms. It's part of Ecolab's Bioquell technology, known for its ability to effectively eliminate bioburden. The "OPTI" designation likely refers to the system's optical sensor capabilities, which may help in monitoring the process or validating its effectiveness Nsdpfx Aexzgr Hjg Rswn

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2015, total width: 2,470 mm, suspension: air, tire size: 385/55-R22.5, color: black, Equipment: ABS, = Additional Options and Accessories = - EBS - Lift axle - Air suspension - Drum brakes = Notes = Nice 10/2015 D-TEC FlexiTrailer 45 ft HC chassis with ABS/EBS, VALX axles with drum brakes, 1st axle = lift axle, 3-way extendable (front, center, and rear), 1x 20 ft, 2x 20 ft, 1x 20 ft center trailer, 1x 30 ft, 1x 40 ft, 1x 40 ft HC, 1x 45 ft HC, unladen weight: 4,785 kg, permissible total weight: 43,000 kg, tires: 385/55-R22.5 (T: 9/5/11 mm; T: 9/9/10 mm), Dutch registration = Additional Information = General Information Nodps Ad Ng Aofx Ag Rewn Year of Construction: 2015 Registration Number: ON-05-YX Axle Configuration Tire Size: 385/55-R22.5 Axle Brand: VALX Drum Brakes: Drum brakes Suspension: Air suspension Rear Axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 55%; Tire tread depth right: 55% Rear Axle 2: Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 55% Rear Axle 3: Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 60% Weights Unladen weight: 4,785 kg Payload: 38,215 kg GVWR: 43,000 kg Functional Body Brand: D-TEC FLEXITRAILER Extendable Body: Yes Condition Technical Condition: very good Optical Condition: very good Additional Information Please contact Arne Honingh for further information.

Year of construction: 2002, condition: used, X-axis: 550mm, Y-axis: 350mm, Z-axis: 400mm, U-axis: 550mm, V-axis: 350mm, connected load: 12kVA, length: 2810mm, width: 2600mm, height: 2080mm, weight: 2.85t, operating hours: 28,608h, with documentation, an on-site inspection is possible. Nwedpfx Asz Sr Nqjg Rjn

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 10,000 kg, power: 264 kW (358.94 HP), input voltage: 400 V, 2 used Salmatec presses, type Maxima 840/125 LF Suitable for compressing sawdust, with forced feed. The presses are equipped with an automatic grease lubrication system for the rollers and main shaft bearings. In addition, there is a lifting beam on the press for changing rollers and dies. Nwjdpfx Agjz I Tzxo Rjn The motors are 132 kW and of the Hoyer brand, manufactured in 2016, IE3 efficiency class. The presses have always been maintained by Salmatec and have recently been fitted with refurbished rotors. Several rollers and dies are included with the presses. Interested or would you like more information? Please feel free to contact us for specifications, photos, and price.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Nwjdpfjzfwavex Ag Rsn Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Nwsdpe Adt Iqofx Ag Rsn

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Nwedpfx Agjzzd Dmo Rsn Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 Nwodpfxeuthz Tj Ag Rsn EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. Nwsdpfx Age Ad I U Eo Rjn From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: excellent (used), 203018) SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 NEW (in 2024) Numerical Control EDGETEQ MOD - Power Touch (WoodCommander) Adjustable Feeding speed up to 25 m/min In-feeding system EZ 14 Nwedeyyvp Uopfx Ag Rsn Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Glueing Unit (P.U.R. Glue + Quick Melt system) Band Pressure zone, adjustable by N.C. Edge coils supporting unit (with No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,5 ca.) Pneumatic swivelling and adjustment Rough Trimming unit BF 20 (2 x Kw 1,5 ca.) Multi Function Unit (Profile contour Trimming) FK 11 (2 x Kw 0,4 ca.) Profile edge scraping unit Finish processing unit (Glue scraper + Buffing unit) FA 11 203019) Panels Return System "LIGMATECH" Mod. ZHR 541/L/095 (with Portal bridge and 360° rotating vacuum head)

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Nsdeymfc Aspfx Ag Rswn

Year of construction: 2017, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 51N292010-01, The IFE SORT is a density sorting machine based on the fluidized bed system for fine, dry bulk materials. The function of this air separation table is based on a combination of vibration and air technology. Heavy components are conveyed upwards by vibration, while lighter components are suspended by injected air and consequently float downwards. The application areas include recycling and secondary raw material processing, as well as the wood, food, and mining industries. Standard version: consists of a basic unit with a perforated plate insert driven by two eccentric motors and a fan with a motor. Nominal width: 1000 mm Capacity: up to 3 tons/hour in recycling – however, this is highly dependent on the density and size of the material being processed. Easy adjustment: of impact angle, oscillation amplitude, inclination, speeds, etc. Design: dust-proof Control cabinet: in an IP 55 housing with a frequency converter for motors and fan, included as standard. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in the Netherlands. The details for optimal transport need to be clarified. The machine price does not include packaging on a pallet. Nwedpfx Agezkvaxo Rjn

Condition: used, mileage: 245,040 km, power: 320 kW (435.08 HP), first registration: 07/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: semi-automatic, emission class: euro4, total width: 2,550 mm, total height: 4,000 mm, Equipment: air conditioning, electronic stability program (ESP), ++ BUY ++ BUY ++ BUY ++ BUY ++ BUY ++ Internal Number: #660 Wiedemann Water Recycling Unit Super 2000 Mercedes Benz ACTROS 2544 6x2 Superstructure * Wiedemann enviro tec, stainless steel 1.4301 * Super 2000, 10.0 / 6.0 * Approx. 16,000 liters total volume (air), of which 10,000 liters for sludge / 6,000 liters for rinsing water * Discharge: Tipper * IFM CAN control system with 5" display and wireless remote control * Outrigger arm at the end of the tank, centrally mounted at the top, telescoping to a working length of 3,900 mm, with suction and rinsing hose guide High-pressure system * URACA P3-45 G65 * Approx. 408 l/min at 175 bar * Rinsing hose 1: 160 m DN32, reel hydraulically extended for 180 m DN32, mounted on the outrigger * Rinsing hose 2: approx. 40 m DN13 Vacuum system * KW 3000 liquid ring pump * Approx. 3,000 m³/h * Liquid ring pump * Suction hose approx. 25 m DN125, reel on the tank, dirty water can be discharged via the suction hose Special features * Equipment cabinet on both sides with two flaps * Soundproofing cladding in front of the pumps on the left and right * Tool box 1x steel Nwodpjzz Uz Nefx Ag Rsn * Advertising panels: Yes * Rotating beacon lights: Cab 2x, superstructure 1x * Garbage bin / scrap box, vice available * Reversing camera: Yes Technical data * Mercedes Benz Actros 2544 L * 6x2 * EURO V * 440 hp / 320 kW * Semi-automatic * Fuel tank: approx. 400 l * Color: orange/blue * Permissible total weight: 26,000 kg * Unladen weight: 18,750 kg * Length x width x height: 10.80 m x 2.55 m x 4.00 m * First registration: 11.07.2011 * FIN: WDB9302011L534153 For further detailed information and/or images, please contact us directly. A wide selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2015, I sell the fully equipped edge banding machine BRANDT Optimat KDF 440 C, year 2015: Configuration: Entry fence servomotorical adjustable Premilling manual adjustable Edge banding EVA glue / Airtec System Schugoma Nedewun Irjpfx Ag Rjwn Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor manual adjustable Radius R2 scrapers pneumatic adjustable Glue scrapers pneumatic adjustable Polishing brushes Cleaning fluid spraying front and back. Control panel Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-8mm Feeding speed 11m/min. Total length including feeding plate 5573mm Total weight 1860kg Only 592.198 Meters edgebanded. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: excellent (used), Simultaneous plasma welding and cutting capabilities. Output power: 400A/36V at 60% duty cycle, 310A/32V at 100% duty cycle. Nwjdpfx Asz Sawweg Rjn

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 60022, turning length: 250 mm, turning diameter: 42 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 150 mm, travel distance Y-axis: 385 mm, travel distance Z-axis: 250 mm, spindle motor power: 7,500 W, total height: 1,900 mm, total length: 3,500 mm, total width: 1,900 mm, overall weight: 4,200 kg, i-42 Ultimate lathe • Number of controlled axes: 10 • Number of driven tools: 12 • Max. diameter: 42 mm • Max. length: 250 mm Includes a feeder – max. length 1 m. Nwedezwmknjpfx Ag Ren