Used Ktr-Rotex 65 Ch-Nr.145147 +N for sale (59,143)

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar Bsdpfszzz Ivex Afgswu - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: ready for operation (used), * Brand: Främbs & Freudenberg * Type: Euroclass * Surface: 6500 x 2400 mm – 1 decks Bedpfx Afeywmn Nogewu * Driving: 18,5 kW E-motor * incl.: springs

Condition: used, Year of construction: 1999, Technical details: x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm control: Unipro 90 Pallet changer 2x: 400 x 500 workpiece - installed height: 800 mm max. clampable workpiece diameter: 720 - 850 mm spindle taper:: SK 40 spindle turning speed - stepless: 10 - 8000 1/min Spindle power: 20 / 30 kW Spindle Torque: 95/143 Nm tool magazin:: 80 SK 40 total power requirement: 55 kW weight of the machine ca.: 11 t Machine with Unipro 90 control for 5 axis - twin palette changer - tool magazine 80 HSK-A 63 - coolant device with coolant through spindle 7 pressure levels - full A & B-axis Bjdpfsy Rmk Rex Afgowu - chip conveyor *

Condition: excellent (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch Article No.: 296 566 Bwodpfx Aob A Hl Rjfgeu -Weight: 170 kg

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, input voltage: 380 V, input frequency: 50 Hz, input current: 12 A, Industrial extraction fan / chip extraction fan – 11 kW – fully functional For sale is a robust industrial radial fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently and is fully functional. Due to its heavy-duty industrial design, it is particularly suitable for extraction systems in carpentry shops, joineries, and other wood processing facilities, as well as for comparable industrial applications. Technical data: - Drive motor: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland - Type: KMER 160 M-4 Bedpfx Afjz Ikxzegewu - Motor power: 11.0 kW / 15 HP - Voltage: 380 / 660 V - Current: 23.0 / 13.0 A - Frequency: 50 Hz - Speed: 1,500 min⁻¹ - Protection class: IP44 - Insulation class: B - Motor number: 25787 - Design: stationary industrial radial fan - Condition: used, fully functional Volume flow and pressure: currently unknown, will be provided upon request. Condition The fan comes from an existing production facility and was in operation until recently. Visually, it shows signs of wear and tear due to age and use. According to the operator, it is technically fully functional. An on-site inspection is possible and highly recommended by arrangement. Location and dismantling Location: 3608 Thun Switzerland The fan is currently still installed. Dismantling, removal, loading, and transport will be carried out entirely by the buyer at their own cost and responsibility. Sale is ex-location in its current condition. Various extraction pipes in the connection can be taken over.

Year of construction: 1988, condition: used, Manufacturer: Jungheinrich Bjdpfxsz Hcqaj Afgewu TYPE: EFG115 -350 ZT Serial No. 799 74 2196 Drive type: Electric Type No. 869 3000 Load capacity: 1,600 kg Battery weight: 900 kg / 945 kg Battery: 24V Year of manufacture: 1988 UVV tested. We are selling the forklift because we are moving and do not have the possibility to transport it to the new location. We purchased it about a year ago as a temporary solution, but overall, we have only used it a few times, as it is located at our second site. The forklift is functional, but the battery needs to be checked. You are welcome to inspect and test the forklift after arranging an appointment in advance. The goods are sold as is, with no warranty of any kind.

Condition: used, Year of construction: 2024, Overview Bedpfx Afsvrfivegowu The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Bwodel Hx Enspfx Afgsu

Condition: used, Year of construction: 1999, Overview Bwedpfx Afewg E D Iegeu The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data - Capacity: 7,500 bottles/hour - Adjustable speed range: 3,750 – 7,875 bottles/hour - Cycle time: 6.72 seconds - Total treatment time: 11.65 minutes - Bottle formats: Up to Euro-NRW - Bottle rows per carrier: 14 - Bottles inside machine: 1,456 - Bottle carrier trays: 110 - Effective spray times: - Hot lye 8.96 seconds - Lye II 8.96 seconds - Hot water II 8.96 seconds - Hot water I 8.96 seconds - Cold water: 13.44 seconds - Fresh water max.: 8.96 seconds - Utilities Bedpfxsxn A S No Afgjwu - Water consumption: 3.25 – 3.38 m³/h at 60°C - Power connection: 12.0 – 12.9 kW - Thermal energy consumption: 3,528 × 1000 kJ/h - Dimensions - Length with cabinet: 7,020 mm - Width of frame: 1725 mm - Height: 2300 mm

Condition: new, Year of construction: 2026, PROD-MASZ 2.2 m Electric Sheet Metal Bending Machine for 2 mm Aluminum Sheets ✨ For Sale: Electric sheet metal bending machine from the renowned company PROD-MASZ. Specifications: ✅ Working Length: 2.2 m ✅ Maximum Sheet Thickness: 2.0 mm (Aluminum) ✅ Bending Angle: 15° ✅ Bending Beam: 18 mm ✅ Drive: Electric – simple and convenient operation ✅ Solid and durable construction for precise bending ✅ Machine is fully functional and ready for immediate use ✅ New, from current production ✅ 3-Phase Control 360V ✨ Ideal for sheet metal fabrication shops, roofing companies, and sheet metal processing. ✨ Professional, reliable, and industry-recognized equipment. Bedpecv S A Esfx Afgjwu ✨ Thanks to the electric drive, work becomes significantly easier and faster, leading to greater efficiency and time savings. ✨ Additional equipment: ✅ Roller shear 0.8mm - €350 ✅ Roller shear 1.2mm - €500 ✅ Hand folding machine €75 ✅ Magnetic setting aid up to 36cm (2 pcs) €75 ✅ Magnetic setting aid up to 65cm (2 pieces): €150 ✅ Rotary finger stop 65cm: additional €1250 ✨ Machine is available ✨ Delivery possible every Monday/Tuesday ✨ Delivery costs: € please ask We look forward to hearing from you! -> We issue invoices

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 15 h, YCM UV650 Spindle: SK40 / 15.000 rpm, 17kW toolchanger places: 60 control: Heidenhain TNC640 travel: X:620mm Y:520mm Z:460mm B:-50 / +110 C:360 spindle cooling system Blum laser for tool length measurement Bwedpfjuxbcijx Afgju 3D probe el. hand wheel Emulsion cooling ICS 20bar outer cooling cooling gun chip conveyor machine dimensions: L:4250mm W:2310mm H:2.560mm weight: appr. 12.500kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PL071105402R, year of last overhaul: 2024, conveyor belt width: 122 mm, Equipment: documentation/manual, M&R dryer for plastisol and water-based inks in textile printing, with a large width of 122 cm. The dryer is in excellent condition and is electrically powered. The belt is wide enough to accommodate two rows of textiles side by side! We have already disassembled the dryer and prepared it for shipping. Therefore, there are no costs for disassembly. We will also take care of loading it onto the truck. We have a very reliable shipping company locally. The shipping costs depend on the destination. Bwedpfsw Stp Iox Afgju We recommend a direct shipment, which we can arrange!

Condition: used, power: 37 kW (50.31 HP), gearing type: other, fuel type: diesel, color: yellow, overall weight: 4,700 kg, empty load weight: 4,260 kg, maximum load weight: 440 kg, axle configuration: 4x4, number of seats: 1, first registration: 01/2000, brakes: other, Year of construction: 2000, operating hours: 6,320 h, driver cabin: day cab, wheelbase: 1,950 mm, Equipment: additional headlights, all wheel drive, cabin, pallet forks, * German machine * 6,320 operating hours * All-wheel drive * Condition: see photos * Articulated Komatsu WA 63 - 3 * Turning radius 3,640 mm * Articulation angle 40° * Hydraulic 4-point quick coupler * Loading bucket 0.7 m³ - bucket width 1,850 mm * Bucket pivot height 3,115 mm * Planetary axles with automatic differential locks on both axles * EasyDrive (Hydrostatic drive) (SN) Bedpfx Afozcbumjgewu * 1st speed range 0 - 5.6 km/h - 2nd speed range 0 - 20 km/h * Hydrostatic steering * Working pressure 200 bar hydraulic * Power-assisted hydraulic controls * Towing hitch * ROPS and FOPS comfort cab * Double-door safety cab according to DIN/ISO * Easy operation via multi-function lever * Comfort driver's seat * Delta lift arm * Sliding window on the right * Heater * Heated rear window * All-around glazing * Optimal noise insulation * Engine: Komatsu Type Komatsu 4D 94E - 37 kW - 2,775 cm³ * Easy maintenance * Wide-opening engine hood * Side maintenance flap * Wheelbase 1,950 mm * Track width 1,450 mm * Weight 4,700 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Condition: used, Year of construction: 2025, operating hours: 14 h, load capacity: 1,500 kg, lifting height: 5,600 mm, Powerful pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 15 hours Year of manufacture: 2025 SCHORR electric pallet truck, 1500 kg, lifting height up to 5600 mm with rider platform With the SCHORR electric pallet truck, you can easily transport heavy loads of up to 1500 kg. It can reach a lifting height of up to 5600 mm (depending on the selected variant, either 5000 mm or 5600 mm). The forks have a standard length of 1150 mm and are therefore ideal for disposable and Euro pallets. Our model is equipped with a high-quality Zapi control system for driving and lifting. The pallet truck features a foldable ride-on platform and is particularly suitable for quickly loading and unloading trucks and containers. With the SCHORR electric pallet stacker, you can now stack pallets efficiently and ergonomically. Longer distances can be easily covered. Thanks to its practical triplex mast, the pallet stacker fits into any truck or container. Additional advantages of the SCHORR electric high lift truck: --Triplex mast --Electric steering --Full free lift --Rider-mounted platform Bwjdjwh Rc Espfx Afgeu Prices depending on lift height / variant: 5000mm lift height: €11,596.00 5600mm lift height: €12,436.00 Technical specifications Manufacturer (abbreviation): SCHORR Manufacturer's type code: RR15HHE2 free lift Load capacity: 1.5t Model: 500E // 560E Weight including batteries: 1230kg // 1265kg Drive: Electric Operator: Rider Tires: Polyurethane Basic dimensions Overall length: 1990mm / 2070mm with ride-on platform Overall width: 850mm Length including fork face: 920mm Lift: 5000mm // 5600mm Free lift: 1740mm // 1940mm Mast height retracted: 2210mm // 2410mm Mast height extended: 5510mm // 6110mm Fork dimensions DIN ISO 2331: 60mm x 170mm (1150mm) Fork spacing: 570mm Working aisle width for pallets: 800x1200 lengthwise 2450mm Turning radius: 1655mm Speed Travel speed with/without load: 6.5km/h / 6.7km/h Lifting speed with/without load: 0.09m/s / 0.16m/s Lowering speed with/without load: 0.15m/s / 0.16m/s Max. gradeability with/without load: 6% / 15% *Further technical data is available upon request. Our competent team will be happy to answer any questions you may have about the SCHORR electric pallet stacker with free lift of 1500 kg, 5.0 m / 5.6 m. You can reach us by phone or email. We look forward to hearing from you and assisting you with your needs. Do you find the purchase price of a pallet stacker too high? No problem, we offer leasing as an attractive financing option. If you have any questions about our leasing offers, please feel free to contact us by phone.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 1000W LCH-1000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Bwjdsthithspfx Afgou Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Bsdpfx Aethitpefgjwu Manual laser cleaner 1500W LCH-1500-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. Manual laser cleaner 3000W LCH-3000-N Laser cleaner is an innovative device for efficient and precision cleaning of surfaces. It operates by focusing the laser beam on contaminants, causing them to evaporate or break down. Laser cleaners are used in various industries from automotive to preservation of monuments. It is characterized by high efficiency, minimal waste and reduced penetration of the cleaned surface. Compared to traditional cleaning methods, the laser cleaner can be more precise and cost effective. Included in the price One-day training along with machine installation 1 day up to 8 hours—machine installation and training. Available to choose from MAX Photonics Bwedpfxor Eqbyo Afgeu MAX Photonics was established in 2004. It is rooted in manufacturing light and optics sources for research institutes, where the quality and stability of the products are of paramount importance. The company quickly realized that the future of laser technology is firmly tied to fiber optics. Research and development started in 2007 resulted in the release of their first 500 CW source in 2014. Since then, the company has begun to vigorously develop its technologies related to laser cutting, welding, marking and engraving. 40000W laser sources can be currently found in their offer. The company has set a goal to become a pioneer in the manufacture of high-capacity industrial lasers. Raycus Wuhan Raycus Fiber Laser was founded in 2007. The company has opted for independent research and development based on mergers with other companies, and is involved in the manufacture of laser sources for a wide range of applications including cutting, welding, soldering, marking and engraving. The brand’s equipment is used in automotive, aerospace, medical, electrical and advertising industries.

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details - Capacity:  - 6,000 bph - Min/ Max: 3,000 bph – 6,300 bp - Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle - Bottles per row: 12 - Bottles in the machine: 1,080 - Bottle cell carriers: 96 - Dimensions:  - Length: 6,000 mm - Width: 1,545 mm - Height: 2,175 mm (without feet) - Weight: approx. 5,800 kg - Water consumption: 3,6 m³/h - Heat consumption 80°C: 480 kJ/ h x 1000 - Electrical consumption: 11 kW - Incl. Spare parts Bodpjvl Huaofx Afgewu - Motors for rear and front drive - Bottle cell carriers - Wear parts - Machine body fully in stainless steel - All hot zones with 5cm insulation - Label extraction belt - Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar - Self cleaning spray tubes in stainless steel

Condition: ready for operation (used), Siemens 6AV7671-4AA01-1AV0 Display Sicalis-PMC7 V2 HBF F-Nr L P1100510918 10 E-Stand A A5E00073821 + 2x keys + SP0842N, used, normal signs of use, 100% fully functional, scope of delivery as per photos. Bsdpfex Euqhjx Afgowu

Condition: ready for operation (used), Siemens 6AV7671-4AA01-1AV0 display Sicalis-PMC7 V2 HBF F-Nr L P1100510918 10 E-Stand A A5E00073821 + 1x key without hard drive, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdpfx Afjx Euqbogeu

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 79 h, load capacity: 227 kg, lifting height: 5,650 mm, overall weight: 1,016 kg, fuel type: electric, Mast lift chickens Snorkel TM12 CE Brand: Snorkel Model: TM12CE Type: mast lift Serial number: 200302833 Year of construction: 2020 Operating hours read: 79 hours Fuel: electric Working height: 5.65 m Load capacity: 227 kg Machine weight: 1016 kg Wheels: trackless Options: Platform dimensions 0.68 x 0.99 m Extendable up to 1.5 m New battery from 2023 Good used condition, Machine has been repainted. Forklift is available for loading Collection by appointment in 75053 Gondelsheim Shipping by courier possible, please inquire about zip code. Bwedorhzagjpfx Afgou

Condition: good (used), first registration: 11/2010, color: red, Year of construction: 2010, Unladen weight: 16,920 kg Payload: 48,080 kg Gross vehicle weight: 65,000 kg Body brand: NOOTEBOOM OVB-65-04V 48 METERS LONG MATERIAL Bsdpox Sxkrsfx Afgswu Extendable body: Yes Technical condition: good Visual condition: good NOOTEBOOM OVB 65-04V LONG MATERIAL SEMI-TRAILER 4 AXLES, HYDRAULICALLY STEERED CENTRAL LUBRICATION AIR SUSPENSION TOTAL TELESCOPIC LENGTH: 48 METERS

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system Bodpjyb Sxaofx Afgjwu - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Bwjdpfx Afstrbrqjgeu