Used Kraussmaffei Km 250-2000 Cx Blue Power for sale (55,834)

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Isdpfjuiykdox Aqujic

Condition: ready for operation (used), Year of construction: 2006, operating hours: 58,670 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 45 mm, displacement volume: 318 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 45 mm Ls/D ratio 22,4 Injection pressure 2336 bar Iiedpfxeydp Idj Aquec Stroke volume 318 ccm Shot weight (PS) 289 gr. Injection rate 143 ccm/s Screw speed 265 1/min Plasticising rate max. 29,3 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,00 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 - 90 ° Additional Options: - 1 x Air valve - 2 x hydr. core pulls - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve Iodpsydp D Eofx Aquoic - 2 x core pull - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 80-380 CX Injection Moulding Machine Year of manufacture: 2010 Clamping unit Clamping force: 800 kN Mounting plate dimensions (H × V): 670 × 670 mm Space between tie bars (H × V): 420 × 420 mm Mould height (min./max.): 250 mm Maximum opening: 750 mm Iiedpfjxw Upfsx Aqusc Injection unit Screw diameter: 40 mm Injection volume: 201 cm³ Shot weight (PS): 183 g Injection pressure: 1860 bar Electro-hydraulic equipment Pump motor power: 15 kW Heater power: 10.9 kW Dimensions and weight Machine dimensions (L × W × H): 4.09 × 1.48 × 2.02 m Weight (with control cabinet): 3.55 t

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250-1900 C1 Injection Moulding Machine Year of manufacture: 2007 ✅ General Information Manufacturer: Krauss Maffei Isdpfxoxak Uco Aqusic Model: KM 250-1900 C1 Year of manufacture: 2007 Clamping system: Fully hydraulic Control system: MC4 with color monitor, operator panel, and floppy disk drive 🔹 Clamping Unit Clamping force: 2,500 kN Opening force: 160 kN Platen movement force: opening 86 kN, closing 68 kN Platen dimensions: 995 x 1,050 mm Tie bar spacing: 630 x 630 mm Mould open stroke: 820 mm Min. mould height: 330 mm Max. opening width: 1,150 mm Ejector stroke: 200 mm Ejector force: 58/28 kN 🔹 Injection Unit Screw diameter: 70 mm Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (PS): 953 g Screw speed: 218/306 rpm Injection rate: 400 cm³/s Throughput (PS): 75 g/s (standard), 105 g/s (high speed) 🔹 Electro-hydraulic Equipment Pump motor power: 55 kW Barrel heaters: 30 kW (6 zones) Dry cycles according to Euromap: 1,400 1/h Oil tank capacity: 720 l 🔹 Dimensions & Weight Net weight (incl. control cabinet): 14.2 t Dimensions (L x W x H): 6.21 x 2.04 x 2.38 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei KM 250 – 1900 C1 Injection Moulding Machine Year of manufacture: 2007 Control system: MC4 Operating hours: only 8,900! Clamping unit: Clamping force: 2,500 kN Maximum mould opening force: 160 kN Moving platen force – opening: 86 kN Moving platen force – closing: 68 kN Iijdpfx Aqsw A N Hfeuec Mould platen dimensions (H × L): 995 × 1,050 mm Tie-bar clearance (H × W): 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1,150 mm Ejector stroke (hydraulic): 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1,778 bar Shot volume: 1,047 cm³ Shot weight (for PS): 953 g Injection rate: 400 cm³/s Screw speed (standard/option): 218 / 306 rpm Maximum plasticizing rate: 75 g/s Nozzle contact force: 110 kN Electro-hydraulic equipment: Pump motor power: 55 kW Installed heating power: 30 kW Number of barrel heating zones: 6 Hydraulic oil tank capacity: 720 l Dimensions and weight: Machine dimensions (L × W × H): approx. 6.21 × 2.04 × 2.39 m Total weight: 14,500 kg Maximum mould weight: 3,430 kg Accessories and additional equipment: - Oil tank - Anti-vibration pads - 3 × core pullers - 8 × hot runner control zones - 2 × air valves - Robot interface according to Euromap 67 Additional information: - Machine located in Poland - Immediately available - Loading, transport, installation, and commissioning can be organized

Condition: excellent (used), Year of construction: 2006, Krauss Maffei KM 160–750 CX Injection Moulding Machine Year of manufacture: 2006 Fully hydraulic clamping system. MC5 control system with color monitor, integrated operator panel, and built-in USB ports. Plasticizing Unit 1 complete HPS-UN plasticizing unit for thermoplastics: Screw diameter: 50 mm Check valve, open nozzle Nozzle radius: 10 mm Nozzle opening: 4 mm Technical Data Clamping Unit Clamping force: 1,600 kN Mold opening force: 86.4 kN Movable platen force: - opening: 44.8 kN - closing: 37.8 kN Platen dimensions (H × V): 820 × 845 mm Tie bar spacing (H × V): 520 × 520 mm Mold opening stroke: 650 mm Mold height (min.): 300 mm Platen opening stroke: 950 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 50 mm Injection pressure: 1,892 bar Shot volume: 393 cm³ Shot weight (PS): 357 g Screw speed (standard/option): 390 / 490 rpm Electrical and Hydraulic Equipment Iiodpfxex Thzpe Aquoc Pump motor rated power: 22 kW Installed heater capacity: 10.97 kW Number of barrel heating zones: 5 Dry cycle rate (Euromap): 1,600 1/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.0 t Machine dimensions (L × W × H): 4.6 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2007, Krauss Maffei Injection Moulding Machine KM 110–750 CX Year of manufacture: 2007 Fully hydraulic clamping system. MC5 control system with color monitor, integrated control panel, and 3 USB ports. Plasticizing Unit Complete plasticizing unit for thermoplastics Version with abrasion protection Screw diameter: 40 mm Non-return valve Open nozzle TECHNICAL DATA Clamping Unit Clamping force: 1,100 kN Mold opening force: 70 kN Moving platen force: - Opening: 35.4 kN - Closing: 31.4 kN Platen dimensions (H × V): 745 × 770 mm Tie bar spacing (H × V): 470 × 470 mm Mold opening stroke: 600 mm Ijdpfsx Avhyex Aqusic Mold height (installation): 300 mm Platen opening travel: 900 mm Ejector stroke: 150 mm Ejector force: 22.6 / 9.9 kN Injection Unit Screw diameter: 40 mm Injection pressure: 2,500 bar Injection volume: 251 cm³ Shot weight (PS): 228.41 g Screw speed (standard/option): 295 / 355 rpm Electrical and Hydraulic Equipment Pump motor rated power: 22 kW Installed heater power: 15.62 kW Number of cylinder heating zones: 5 Dry cycle rate (Euromap): 2,000 cycles/h Oil tank capacity: 489 l Dimensions and Weight Net weight with control cabinet: 6.2 t Machine dimensions (L × W × H): 4.9 × 1.6 × 2.1 m

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Iiedpew U Rcdsfx Aqusc Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. Iisdpfeud N Hdsx Aqusc We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837 Iiedpfx Aqouggb Djuoc  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation Iiedpfx Aqow U N Ixoujc The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Iodpfx Aqezc Nwvjujic Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 35-55 CX / machine in very good technical condition Year of manufacture: 2008 injection unit: Screw diameter: 18 mm injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit : clamping force: 35 t tie bar distance: 320x320 mm size of clamping platens: 540x540 mm Ejector: hydraulic clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Control with hot runners x 6 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service Krauss Maffei in Germany. It is possible to change the screw diameter for fi 20 mm, 22 mm Dimensions: Weight: 2600 kg Length/width/height: 3.50x1.40x1.70 m Iiedpfx Aqezc Nfyjusc Drive: Pumps/motor: 11 kW Heating power: 3,78 kW Total power: 14,78 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Iisdpozd Smbofx Aqusc Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) Iiodpfx Aeyhbq Esquoc • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Additional Options: - 1 x hydr. core pull on movable plate Isdpfezdrciox Aqujic - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100 – 12000 MX injection molding machine Robot - Wittmann Year of production - 2008 Fully hydraulic closing system. MC5 control system with color monitor, integrated control panel and built-in 3 USB ports. Plasticizing system complete plasticizing system for thermoplastics in the version with abrasion protection, screw diameter 120 mm, with non-return lock and open nozzle TECHNICAL DATA Closing unit - Mold closing force: kN 11000 - Mold opening force: kN 770 - Dimensions of the mounting plate (h x v): mm 2210 x 1910 - Clearance between columns (h x v): mm 1550 x 1250 - Mold opening path: mm 2000 - Mold installation height (min - max): mm 600 - 1200 - Plate opening stroke: mm 2600 - Ejector stroke: mm 300 - Ejector force: kN 220/110 Injection unit - Screw diameter: mm 120 Iijdpfevu Hp Aox Aqusc - Pressure injection: bar 1758 - Injection volume: cm3 6786 - Injection weight for PS: g 6175 - Number of screw revolutions, standard/option: rpm 103/145 - Injection efficiency (standard) ccm/s 1118 - Injection efficiency (accumulator) ccm/s 1696 Electric-hydraulic equipment - Nominal power of the pump motor: kW 132 - Installed power of heaters: kW 82 - Number of cylinder heating zones: - 7 - Number of dry cycles according to Euromap: 1/h 802 - Oil tank capacity: l 2440 Dimensions and weight - Net weight with control cabinet: t 73 - Machine dimensions (length x width x height): m 12.47 x 3.65 x 2.82

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, clamping force: 8,500 kN, screw diameter: 135 mm, clearance between the columns: 1,140 mm, ejector stroke: 300 mm, TECHNICAL DETAILS Mold closing force: 8,500 kN Mold opening force: 560 kN Dimensions of the mounting plate (h x w): 1,600 mm x 1,600 mm Distance between columns (h x w): 1,140 mm x 1,140 mm Mold opening distance: 1,600 mm Mold height (min-max.): 500 mm - 1,100 mm Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Screw diameter: 135 mm Injection pressure: 1,389 bar Injection volume: 8,588 cm³ Injection weight per part: 6,098 g Iiedpfxsy T Hmke Aqujc Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic system Motor rated power of the pump: 132 kW Dry cycle time according to Euromap 6: 965 1/h Oil tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle opening: 9 mm Dimensions & Weight Installation space dimensions (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei robot LRX 500 MC 5 control system with color monitor Integrated control panel and USB data storage Complete plasticizing unit for thermoplastics Check valve

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, clamping force: 11,000 kN, screw diameter: 120 mm, injection pressure: 1,758 bar, injection weight: 6,175 g, opening stroke: 2,000 mm, KraussMaffei KM 1100–12000 MX including WITTMANN robot! TECHNICAL DETAILS Clamping force: 11,000 kN Opening force: 770 kN Platen size (H × V): 2,210 × 1,910 mm Tie bar distance (H × V): 1,550 × 1,250 mm Opening stroke: 2,000 mm Tool height (min. - max.): 600 - 1,200 mm Platen stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Screw diameter: 120 mm Injection pressure: 1,758 bar Shot volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (Standard / Option): 103 / 145 rpm Injection rate (Standard): 1,118 cm³/s Injection rate (Accumulator): 1,696 cm³/s MACHINE DETAILS Electro-hydraulic system Rated power of pump motors: 132 kW Installed heating capacity: 82 kW Number of heating circuits on the cylinder: 7 Cycle time (Euromap): 802 1/h Oil tank volume: 2,440 l Dimensions & Weight Iisdpfx Aqey T Hd Njuoc Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Net weight with control cabinet: 73 t EQUIPMENT Robot: Wittmann MC5 control system with color monitor, integrated control panel and three USB ports

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Iedoy Hqwyjpfx Aqujic Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Year of construction: 2008, condition: good (used), For sale is a Krauss Maffei brand injection molding machine type KM 110-380 The machine is in a good to very good condition, all maintenance and inspections have been performed Technical data: Year of manufacture 2008 Extended tie bars Pneumatic valve gate 2X Hydraulic core puller 31000 operating hours Cylinder D35mm Ijdpfoibyatox Aqusic Mould closing force: kN 1100 Mold opening force: kN 70 Euromap63 interface for version > 1-04-09 Nitrogen battery present Included component Wedge shoes with bolts and nuts Double bit wrench Declaration of conformity cpl switchboard Certificate USB memory stick Ejector coupling-mechanical Enclosed in the control cabinet All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: excellent (used), Year of construction: 2011, operating hours: 28,000 h, functionality: fully functional, clamping force: 1,300 kN, For sale is a hybrid injection molding machine, 2 components, of the brand KraussMaffei and type KM 130-750 CX The machine is in very good condition, ready for immediate use, with low operating hours. Electronic injection unit and dosing unit, hydraulic clamping unit. Technical data: Year of construction: 2011 Operating hours: 28,000 h Clamping force: 130 T Cylinder Ø 30mm / 40 mm (& 2*50mm additional) Core pull: 1*Hydraulic Valve gate: Pneumatic Tie bar extension: 160 mm Internal pressure transducer Selector switch On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Iedou Hxm Uopfx Aqueic Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI Injection Moulding Machine KM 1100-12000 MX Basic Information Manufacturer: Krauss Maffei Model: KM 1100-12000 MX Year of manufacture: 2008 Control system: MC5 Control panel: color monitor integrated with the control console Interfaces: 3 USB ports The machine is equipped with a fully hydraulic clamping system and a complete plasticizing unit for processing thermoplastics, featuring abrasion protection. Clamping Unit Clamping force: 11,000 kN Mold opening force: 770 kN Platen dimensions (horizontal × vertical): 2,210 × 1,910 mm Tie bar spacing (horizontal × vertical): 1,550 × 1,250 mm Mold opening stroke: 2,000 mm Minimum mold height: 600 mm Maximum mold height: 1,200 mm Platen opening stroke: 2,600 mm Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection Unit Screw diameter: 120 mm Maximum injection pressure: 1,758 bar Injection volume: 6,786 cm³ Shot weight (PS): 6,175 g Screw speed (standard / option): 103 / 145 rpm Injection rate (standard): 1,118 cm³/s Injection rate (accumulator): 1,696 cm³/s Electrical-Hydraulic Equipment Iijdpfx Aeyugfzoqusc Rated drive motor power: 132 kW Installed heating capacity: 82 kW Number of barrel heating zones: 7 Dry cycle rate (EUROMAP): 802 cycles/h Hydraulic oil tank capacity: 2,440 l Machine Dimensions & Weight Net weight (with control cabinet): 73 t Machine dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly increases the energy efficiency of hydraulic injection molding machines. The system controls the hydraulic pump motor via a frequency inverter, adjusting the motor speed to the current production cycle requirements. Key Benefits: - Reduction in electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in the plastics processing industry - Reduced energy losses during idle operation - Less heating of the hydraulic system - Increased longevity of the motor and hydraulic components - Can be retrofitted to existing hydraulic injection molding machines The ESS system allows for a significant reduction in machine operating costs while maintaining full production parameters.

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical data Year of manufacture: 2007 Clamping unit Clamping force: 1300 t Max. opening stroke/mounting height: 2300 mm Max. distance between platens: 4000 mm Min./max. mould height: 1000 - 1700 mm Max. platen height: 1910 mm Min. mould size: 1000 - 1700 mm Clear tie bar spacing: 1500 mm Nozzle radius: R40 mm Mould weight: 29000 kg Ejector stroke: 350 mm Injection unit Screw diameter: 135 mm Stroke volume: 8588 ccm Core pulls AWS/DS: 1/1 Needle shut-off pneumatics: 1 Iijdpfx Aqoyifgksusc The machine is supplied with a Kuka robot and can be inspected in operation.