Used Johansen T 85 Pneuma for sale (73,325)

Condition: like new (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 365 mm, table length: 2,100 mm, clearance between the columns: 540 mm, overall weight: 9,050 kg, Equipment: CE marking, safety light barrier, The following 2 metre Trumpf press brake featuring the specific extended daylight configuration. The machine is in exceptionally clean, near-mint condition. This is largely because it is being sourced from an immaculate, highly regulated factory that manufactures components exclusively for the medical sector. Used Trumpf V series cnc pressbrake for sale Trumpf v85 2m x 85ton – 4axis cnc pressbrake / with Extended daylight and stroke Isdpfx Aezfp D Tspcsbb Make: Trumpf Model: v85 Year: 2001 Total axis: 2axis back gauge / total axis 4 – y1 y2 x r and i axis Crowing Complete with: • Extended stroke and daylight: 365mm maximum stroke / 535mm daylight • 2axis back gauge • i axis – bottom base moves to use twin multi v without operator moving or changing the tooling • Fully serviced / Good condition Delivery to your works, installation and tuition with your operators available.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets Ibsdpfx Apsyzxyxoceb CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, Year of construction: 2010, functionality: fully functional, THERMAL processor SIRIO TH 85 with input bridge To connect inline with CTP. MACHINE IS READY TO WORK. Iodszquq Aepfx Apcjbb

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection Ijdpfx Apszk Eqmscobb - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2022, condition: used, Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System Manufacturer: Carsoe Model: Anytray Buffer 1500 LLANONE Right Pneumatic Year of manufacture: 2022 Machine type: Tray buffer / product accumulation system Description The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines. Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities. Technical Specifications - Manufacturer: Carsoe - Model: Anytray Buffer 1500 LLANONE Right Pneumatic - Year: 2022 - Power: 0.46 kW - Supply voltage: 230 VAC + N + PE - Frequency: 50 Hz - Air pressure: 6 bar - Max short-circuit current: 6 kA - SO-No.: FOD 220002 - Part number: P09390 Key Features - Pneumatic tray buffering system - Designed for stable product flow in production lines - Hygienic stainless steel construction - Suitable for high-capacity food processing environments - Easy integration into automated tray handling systems Applications Isdpfx Apeyt Hu Tjcsbb - Seafood processing lines - Ready meal tray production - Automated packaging lines - Food processing plants Condition Used .

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Ibsdpfx Apezqfwmsceb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete 1 x Serial number 2600-102039 1 x Serial number 2600-102040 Controller: IRC5 M2004 Number of axes: 6 Max. payload: 12kg Max. working range: 1850mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach pendant, circuit diagrams Ijdpfx Aezm Ikhepcsbb Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Ex works / free loading. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to abroad on request – please specify country, city and postcode. Freight costs on request – please specify delivery address.

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. Ibsdpfx Aozxblpjpcob DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2017, operating hours: 1,452 h, functionality: fully functional, machine/vehicle number: Roboter: 2600-107871 / Steuerung: 2600-107871, overall weight: 417 kg, load capacity: 12 kg, arm reach: 1,850 mm, ABB industrial robot featuring an IRB 2600-12/1.85 Type B manipulator and an IRC5 Single controller, designed for industrial automation applications. The unit is used and has been tested. Typical applications include handling, assembly, machining, and general automation. It has a payload capacity of 12 kg and a reach of 1850 mm. Manufactured in 2017, it has 1452 operating hours and is running RobotWare Version 6.04.01.00. It is equipped with two cable sets for power and control connections, a FlexPendant DSQC 679 teach pendant, a transport frame/mounting base located under the manipulator, and the software options World Zones, Path Recovery, and Collision Detection. Ibjdpfjzak Htsx Apcjb

Condition: excellent (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503618 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of manufacture: 2020 Operating hours: 8344 h Technical data, clamping unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum mold opening: 900 mm Opening stroke: 500 mm Platen diameter: 2000 mm Ibedpfxoz A Tb Uo Apcjb Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical data, injection unit Screw diameter: 50 mm Injection volume: 392 ccm Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 min Screw torque: 880 N Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & weight Machine dimensions L x W x H: 4.11 m x 2.65 m x 4.81 m Total weight: 22000 kg Equipment Screen text, German Screen text, English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary platen Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total width: 1,650 mm, total length: 5,450 mm, total height: 1,900 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,475 kg, type of input current: three-phase, CAPACITY: 250 pieces/minute max. BAG WIDTH: 80 mm – 800 mm max. BAG LENGTH: 70 mm - 1000 mm FILM THICKNESS: 0.020 mm – 0.100 mm TOTAL ELECTRIC POWER: 13 kW (380 V – 50 Hz) SERVO MOTOR: 4 UNIT PHOTO CELL: 1 UNIT TOTAL AIR SUPPLY: 6 Bar min. MACHINE WIDTH: 1650 mm MACHINE LENGTH: 5450 mm MACHINE HEIGHT: 1900 mm WEIGHT: 1475 kg STANDARD FEATURES - Controlled via a touch operator panel: bag length, number of pieces per bag, production speed, visible number of bags in the package, stop function based on the total count. - Equipped with one photocell. Handles both printed and unprinted bags. - High-speed cutting with precise measurement, achieved through servo motor-controlled pulling rollers. - Strong and high-quality sealing is achieved through a servo motor-controlled sealing jaw. - The servo motor-controlled belt system ensures synchronous operation of the belts with the stacking system. - Servo motor-controlled stacking rollers provide high-quality stacking. - Warp rolls with inverter tension control system. - Pneumatic ballerina system. - Automatic edge control system. - Automatic stop when the roll is empty. - Automatic stop when the photocell print location is incorrect. - Roll bobbin binding diameter: max. 800 mm. Ijdozd N Ipopfx Apcebb - Capable of processing PP, OPP, CPP, High Density Polyethylene (HDPE), and Low Density Polyethylene (LDPE) bags.

Year of construction: 1992, condition: ready for operation (used), An injection molding machine Dr. Boy is available. Clamping force: 500kN, tie-bar spacing: 305mm/305mm, platen dimensions X/Y: 500mm/500mm, max. opening stroke: 350mm, max. platen spacing: 600mm, min. mold height: 250mm, max. screw stroke: 120mm. Machine dimensions X/Y/Z: approx. 3450mm/1050mm/2000mm, weight: approx. 2050kg. The system has minor defects requiring repair. Documentation available. An on-site inspection is possible. Ibedpfx Apsyw Svfoceb

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 18576, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, nominal power (apparent): 7 kVA, controller model: Fanuc Oi-MC, total height: 2,640 mm, total length: 2,870 mm, total width: 2,000 mm, table width: 500 mm, table height: 900 mm, table length: 950 mm, table load: 500 kg, overall weight: 5,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 8,000 rpm, number of spindles: 3, number of slots in tool magazine: 24, tool length: 250 mm, tool diameter: 88 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, For sale: CNC milling machine Topper TMV850A, year of manufacture 2006, month 08, serial number 18576, in good working condition with the following specifications: Vertical machining center: model no.: TMV-850A Machine: Working area (LxW): 950 mm x 500 mm Longitudinal Travel (X): 850 mm Cross Travel (Y): 500 mm Vertical Travel (Z): 530 mm Distance between Spindle and Table Top: Max. 680 mm / Min. 100 mm Ibedpeyk E A Rofx Apceb Maximum Table Load: 500 kg Table Height: 900 mm Rapid Traverse (X/Y/Z): X, Y = 30 m/min, Z = 24 m/min Cutting Feed: 1–12,000 mm/min Servo Motor: X, Y: 2.1 kW, Z: 3.8 kW Spindle Taper: BT40 Spindle Speed: 60–8,000 rpm Spindle Motor: 5.5/7.5 kW Coolant Motor: 0.37 kW ATC (Automatic Tool Changer): Tool Selection: Random Tool Capacity: 24 (max) Max. Tool Diameter: 88 mm Max. Tool Diameter & Length: 250 mm Max. Tool Weight: 7 kg Tool Holder: BT40 Machine Height: 2,640 mm Net Weight: 5,000 kg Floor Space (LxW): 2,000 mm x 2,870 mm Machine Precision: Position 0.01 mm / Full travel accuracy: +/-0.005 mm

Condition: ready for operation (used), Year of construction: 1987, A Hoes drainage trencher for laying drainage pipes and trenches for subsurface drainage is available. Engine: Deutz F 8 L 413 F, Power: 157kW, Torque (1500rpm): 760Nm, Fuel tank capacity: 435l, Oil tank capacity: 125l, Max. working/travel speed: 2400m/min/4750m/min, Track length: 4900mm, Track gauge: 2120mm, Track shoe width: 550mm, Specific ground pressure: approx. 0.26kp/cm², Max. trenching chain speed: 5.69m/s, Chain tensile strength: 640kN, Chain pitch: 100mm, Max. trench width: 290mm, Max. trench depth: 1850mm. Machine dimensions X/Y/Z: approx. 9650mm/2700mm/3400mm, Weight: approx. 13500kg, Operating hours: approx. 8470h. The machine is equipped with a laser guidance system. Includes many spare parts. Documentation available. An on-site inspection is possible. Ibedpfx Aeznmzbspceb

Year of construction: 1995, condition: used, Pneumatic press, pneumatic punch, multifunction punch, punch, universal punch, punching machine Ibodsdkx S Ejpfx Apcjb -for window construction: tools -pneumatic: with foot control -with various tools: -pneumatic: operated -Air pressure: 8 bar -Pressure force: about 3.2 ton. -Stroke max.: 20 mm -Dimensions between stands: 250 x 200 mm -Dimensions: 505/510/H1360 mm -Weight: 90kg

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, Equipment: documentation/manual, ARBURG Allrounder 2000 T 2000-800 Stock No.: 503617 Manufacturer: ARBURG Type: Allrounder 2000 T 2000-800 Control: Selogica direct Year of Manufacture: 2019 Ibodpez A Tdpsfx Apceb Operating Hours: 8250 h Technical Data, Clamping Unit Clamping Force: 2000 kN Platen Size H x V: 1772 x 800 mm Minimum Mold Height: 400 mm Maximum Platen Distance: 900 mm Opening Stroke: 500 mm Rotary Table Diameter: 2000 mm Ejector Stroke: 175 mm Ejector Force: 45 kN Mold Weight: 6000 kg Technical Data, Injection Unit Screw Diameter: 50 mm Injection Volume: 392 ccm Injection Pressure: 2000 bar Screw Length: 20 l/d Screw Stroke: 200 mm Screw Speed: 60 rpm Screw Torque: 880 N Number of Heating Zones: 8 Nozzle Distance: 400 mm Dimensions & Weight Machine Dimensions L x W x H: 4.11m x 2.65m x 4.81m Total Weight: 22000KG Equipment Screen text in German Screen text in English CEE socket 16A Hydraulic core pull, 4x Air valve 1x Machine with rotary table Machine with water manifold Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: excellent (used), For sale: Original J.D. Neuhaus PROFI pneumatic hoist, model LN-1T, with a lifting capacity of 250 kg (0.25 t). Manufactured in Germany in 1991 by J.D. Neuhaus Hebezeuge GmbH & Co., Witten-Heven – a global leader in pneumatic lifting systems. Technical specifications: • Model: PROFI LN-1T • Lifting capacity: 250 kg (0.25 t) • Year of manufacture: 1991 • Power supply: 6 bar compressed air • Air consumption: approx. 3–4 m³/min • Chain: steel 5 x 15 mm, DIN 5684-8 standard Ibsdsxtfnwjpfx Apcjb • Controls: dual-lever (up/down) • Weight: approx. 35 kg Condition: • Used, fully functional. • Complete set including hook, control valve, and chain bag. • Normal signs of use, with no mechanical damage. Applications: Suitable for lifting tools, components, and parts in workshops, assembly lines, industrial plants, and ATEX zones (depending on version). JDN construction ensures reliability and durability – made in Germany, commonly used in the aerospace, petrochemical, and automotive industries.

Condition: good (used), mileage: 576,821 km, power: 294 kW (399.73 HP), first registration: 01/2007, fuel type: diesel, tire size: 385/65 x 22.5, axle configuration: 8x4, wheelbase: 6,000 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, total width: 2,550 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2007, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, retarder, seat heater, second fuel tank, trailer coupling, = Additional Options and Accessories = - Adaptive cruise control - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Brake booster Ibedpfx Apjy Ev Rveceb - Roof cover - Differential lock - High beam - Windscreen - Low noise - Enclosed cab - Speed limiter - Refrigerator - Air-suspended seats - Air horn - Motorcycle cover tarpaulin - Parabolic suspension - Radio/CD player - Radio/cassette player - Rotating beacon - Reversing camera - Sunroof - Side door - Sideskirts - Seat heating - Sun visor - Stability control - Auxiliary heater - Toolbox - Windshield - PTO (power take-off) - Central lubrication - Trailer coupling (towing jaw) = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Axle configuration Axle make: Volvo Front axle: Tyre size: 385/65 x 22.5; Max. axle load: 10,000 kg; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 1: Tyre size: 385/65 22.5; Max. axle load: 10,000 kg; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: disc brakes; Suspension: leaf suspension Rear axle 2: Tyre size: 315/80 22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Left inner tyre tread: 40%; Left outer tyre tread: 40%; Right inner tyre tread: 40%; Right outer tyre tread: 40%; Reduction: hub-reduction axles; Brakes: drum brakes; Suspension: hydraulic suspension Rear axle 3: Tyre size: 315/80 22.5; Twin tyres; Differential lock; Max. axle load: 11,500 kg; Steering; Left inner tyre tread: 30%; Left outer tyre tread: 30%; Right inner tyre tread: 30%; Right outer tyre tread: 30%; Reduction: hub-reduction axles; Brakes: drum brakes; Suspension: hydraulic suspension Weights Unladen weight: 16,010 kg Payload: 27,990 kg Gross Vehicle Weight (GVW): 44,000 kg Functional Pump: Yes Condition Technical condition: Very good Optical condition: Good Damages: None Further information Please contact Jonathan Kooy for more information.

Year of construction: 2018, condition: ready for operation (used), A total of four stainless steel tanks are available for the food industry. 1/2) Two oil tanks Göztepe, volume: 2x1000l, inlet height: 2500mm, outlet height: 800mm, machine dimensions X/Y/Z: approx. 4000mm/1900mm/3000mm. 3/4) Two Göztepe sugar tanks, volume: 2x1000l, inlet height: 2500mm, outlet height: 860mm, machine dimensions X/Y/Z: approx. 4000mm/2000mm/2700mm. Agitators included. Documentation available. On-site inspection is possible. Ibodpfx Apju Tizgjceb

Condition: used, Year of construction: 1978, Liter per hour: 7000 Ibsdsz Ar T Sjpfx Apcjb

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: Numer fabryczny maszyny B0503A0341, functionality: fully functional, operating hours: 29,000 h, For sale, a used TRUMPF TruBend 5085 edge bending machine, manufactured in 2009. The machine is in unique technical condition – very good! Ibsdpfxey Tluye Apcjb The machine has a low number of operating hours – 8250. In 2020, the control system was replaced with a new one at an operating hour count of 20500. The actual total operating hours of the machine are 29000. Machine serial number: B0503A0341 Hydraulics: Hoerbiger Year of manufacture: 2009 Maximum pressing force: 850 kN Working length: 2720 mm Opening: 415 mm, Throat: 420 mm Power: 17 kW Voltage: 400 V Hydraulic oil tank capacity: 120 l Hydraulic system pressure: 300 bar Weight: 7800 kg Tool type: hydraulic Wila / Trumpf Control system: TASC 6000 - Upper drive in a four-cylinder version Y1/Y2 - 4-axis back gauge - X, R, Z1, Z2 Hydraulic upper tool clamping system WILA Hydraulic lower tool clamping system WILA CNC crowning BendGuard Preparation for ACB

Condition: used, Year of construction: 2017, functionality: fully functional, GF+ FORM 300 – EDM machine with WorkPartner 1+ automation For sale is a high-quality GF+ FORM 300 EDM machine with automated workpiece/electrode handling system WorkPartner 1+ automation, manufactured in 2017. The machine is from GF Machining Solutions (Georg Fischer) and is particularly suitable for the precise machining of demanding workpieces in the tool and die making industry. Ibodpfxjztn Ado Apcjb Machine features: • Manufacturer: GF Machining Solutions / GF+ • Type: FORM 300 • Automation: WorkPartner 1+ • Process: Ram EDM • Robust and precise design for professional production use • Automated loading through WorkPartner 1+ • Integrated machine control • Suitable for tool and die making, as well as demanding precision machining The depicted system is located in an industrial production environment and is in used condition, as shown in the pictures. The combination of GF+ FORM 300 and WorkPartner 1+ enables an efficient, automated production process and reduces manual intervention. This is particularly interesting for companies that want to expand their EDM capacity or implement an automated ram EDM solution. The machine can be inspected at any time, but it has already been dismantled and is no longer connected to the power grid. Therefore, a functional demonstration is not possible. The pallets and electrode holders can be purchased separately. Important note: The operating hours will be provided later, but the machine has hardly been used. Price: on request Inspection: possible by appointment Sale is preferred to commercial enterprises. The machine is sold used. Sale excludes any warranty for defects. All information is provided to the best of our knowledge, but without guarantee. Errors, prior sales, and changes reserved.

Condition: good (used), Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: TrumaBend V85s Capacity: 2050 x 85 tons Control: Delem DA69 Axes: Y1, Y2, X, R, Z1 and Z2 Hydraulic WILA upper and lower clamping Year of manufacture: 2005 Isdpfxjy Dpufe Apcsbb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, operating hours: 55,000 h, overall weight: 7,300 kg, Equipment: safety light barrier, TRUMPF TruBend 5085 (B03) Year of manufacture: 3/2017 Press force: 850 kN (85 tons) Machine operating time: 55,000 hours, hydraulic operating time: 14,000 hours, press beam operating time: 2,300 hours, crowning operating time: 200 hours. Control system: TASC 6000 Configuration: 2 support consoles 4-axis back gauge CNC-controlled crowning Hydraulic upper tool clamping Ibodpfsz Dgv Uox Apcjb Hydraulic lower tool clamping BendGuard Additional lighting for the front and rear working areas.

Condition: used, Year of construction: 2006, Zum Verkauf steht ein größerer Posten pneumatischer Prozessventile mit Antrieb. Gesamtmenge: 96 Stück – ca. 65 Einheiten als komplette Ventile mit Edelstahl-Kugelhahn – restliche Einheiten: pneumatische Antriebe / Ersatzteile Die Komponenten stammen aus industrieller Anwendung (Prozessanlage) und wurden fachgerecht demontiert. Ein Teil der Einheiten wurde überprüft, mehrere Komponenten zeigen funktionsfähigen Zustand. Die vollständige Funktionsprüfung aller Einheiten wurde nicht durchgeführt. Geeignet für: – Chemische Industrie – Lebensmittel- und Getränkeindustrie – Wasser- und Prozesstechnik – Wartung, Ersatzteilversorgung, Wiederverkauf Neupreis vergleichbarer Einheiten: ca. 120–300 € pro Stück. Sehr interessanter Posten für Händler oder industrielle Instandhaltung. Verkauf vorzugsweise komplett. Preis: 4.200 € VB Standort: Slowakei (EU) Versand europaweit möglich For sale: large lot of pneumatic process valves with actuators Ibjdpfoy Nfzxjx Apceb Total quantity: 96 units – approx. 65 complete units with stainless steel ball valves – remaining units: actuators / spare parts The components originate from industrial process application and were professionally dismantled. Some units have been checked, several appear to be in working condition. Full functional testing of all units has not been performed. Suitable for: – chemical industry – food & beverage processing – water treatment – maintenance and spare parts supply – resellers Estimated new price of comparable units: approx. 120–300 € per unit. Very attractive lot for traders or industrial maintenance. Preferably sold as one lot. Price: 4,200 € negotiable Location: Slovakia (EU) Worldwide shipping available