Used Hima Banding Machine for sale (65,629)

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Hedpfxjh Ux Sue Aa Eofi Rounding draw knife 1929 Form milling assembly 1983 Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Hfodpfsiw D Udox Aa Eoi Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Year of construction: 1990, condition: used, Power connection: 400 V, 3 kW Glue roller Milling unit: 2x flush-cutting Suitable for edge banding up to 0.4 mm Dimensions (L x W x H): 3150 x 680 x 1250 mm Weight: approx. 400 kg Conversion to 2 mm PVC edge banding possible = additional cost of €1,000.00 Hedpfxokkfk Ne Aa Esfi

Condition: used, Year of construction: 2025, functionality: unexamined, machine/vehicle number: A25011110, Machine data Designation: Metcor BS-260G Weight: approx. 216–240 kg Connection: 3~ 400 V Saw data Band dimensions: 2455 × 27 × 0.9 mm Belt tension: mechanical (manual) Band speed: 36 / 72 m/min (2-stage) Cutting data Feed rate: 0 – 50 m/min (adjustable) Lowering of the saw bow: hydraulically controlled Swivel range: 0° – 40° Capacity (cutting range) Round material 0°: 215 mm 45°: 180 mm 60°: 120 mm Square 0°: 200 × 200 mm 45°: 170 × 170 mm 60°: 110 × 110 mm Rectangle 0°: 250 × 180 mm 45°: 160 × 180 mm 60°: 110 × 180 mm Technical data Vise height: 1010 mm Hedpfx Ajzim Iwoa Ejfi Span: 260 mm Diameter of the band wheel: 295 mm Drive / Electrical system Main motor: 0.75 / 1.1 kW Coolant pump: 0.025 kW Dimensions Machine dimensions: 172 × 88 × 181 cm

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: refurbished by Holz-Her specialist Equipment and technical data: - Basic machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - Edge milling unit FG 201 with 2 milling heads including diamond milling cutters 70 x 48 x 30 mm Z 2 - Edge feeder 1903, single-feed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301 with automatic glue height adjustment (sensing nozzle) - With magazine for glue cartridges - Pressing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Cutting unit 1918, pneumatically swiveling 0-10 degrees - Multi-function milling unit 1827 MOT 4 with pneumatic package including diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter Hfsdpozk N U Aefx Aa Eoi - Trimming blade unit 1929 MOT 2 - Chip collection box - Surface trimming blade FK 701 - Scraper unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Hodpfxjzk N Hrs Aa Ejfi Equipment and technical data: Machine with PLC control Feed speed: 12/16 m/min Edge feed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensing nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Milling unit, fixed up to 30 mm 1962 Milling unit MOT 5 with multifunctional flush, radius, bevel 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Air blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging thickness max.: 13 mm Weight: 1,350 kg Machine dimensions: 5,850 x 1,000 x 1,750 mm Location: Röllbach Availability: short-term

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical data: Feed rate, continuously adjustable: 10-18 m/min Control system: Edge Control 19 with 18.5" touchscreen color display Jointing cutter Edge feeder Glue application station: cartridge, sensing nozzle with automatic glue height adjustment Pressure unit Trimming unit Multi-function milling unit Copy milling unit Radius trimming unit Hfjdpfx Aaezk N Eus Eei Straight trimming blade Edge buffing Workpiece thickness: 6 - 60 mm Edge thickness: 0.4 - 8 mm Minimum workpiece width: 60 mm Shortest workpiece length: 180 mm Dimensions: 5300x1500x1600 mm Weight: 2200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 1989, Used machine Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Hfodpfxjzk N Ehj Aa Esi Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min Power consumption approx. 11 kW With quick-heating glue reservoir Pneumatic edge trimming up to 3 mm With cross-cut saw for edge thickness up to 5 mm With milling station, optionally equipped with combined reversible blade cutters for radius, straight and chamfer milling Hedpfx Aozk N Ebsa Eofi Outrigger, foldable and extendable to the front With chassis L x W x H: 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - Control system with 15-inch touch screen - Edge milling unit with 2 milling heads - Edge feed system - GluJet 301 adhesive application system: 2.3 kW, automatic adhesive height adjustment, sensing nozzle - Pressing unit: pneumatic - Trimming unit: pneumatic - Diamond milling cutters, left + right: with CM technology - Corner copying unit with diamond milling cutters - Surface scraping blade - Buffing unit - Extendable workpiece support - Motorized pressure bridge adjustment with NC axis via program control - Extraction hoods for the trimming unit - Multifunction milling unit: MOT 4 - Vertical sensing rollers: pneumatic - Pneumatic swiveling device for milling unit MOT 4 Hodpfszk N Dkox Aa Eofi - Scraping blade unit MOT 2 with chip collection box - Spraying system for the infeed and outfeed area - Minimum workpiece length: 160 mm - Workpiece thickness: 6-60 mm - Edge thickness: 0.4-6 mm - Feed rate: 10 m/min - Overall length: 4930 mm - Weight: 1420 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit Hfjdpfjzk N Amox Aa Eji - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Round pot glue application unit - with a second glue application unit for PUR processing - Feed unit with automatic edge banding magazine - Pressing zone with multiple pressure rollers - End trimming: 2 motorized saw units for end/edge trimming - Top/bottom router: 2 router units with guide wheels for radius or chamfer - Radius profiling blade: pneumatically controlled, for finishing radii - Flat profiling blade: for smoothing edge surfaces - Polishing unit: 2 polishing discs with motors for final finishing - RIEPE spray system - Control: PLC with control panel - Replacement of the feed frequency inverter by OTT in 2022 - Feed speed approx. 10-12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 - 12 mm - Power supply 3 x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A Hodpfx Aaozk Nw Ds Eefi - Control voltage 24 V DC - Max. fuse rating 35 A (5 x 6 mm² connection cable) Machine dimensions: approx. 6120 x 840 x 1385 mm Machine weight approx. 3,000 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 2003, Used machine Hfodpfxszk Nwwj Aa Eji Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm with roller guillotining with flush trimming with knife with top/bottom flush and bevel milling with HF motors Hfsdpfjzk Ntlox Aa Eoi Location: Röllbach Availability: short term

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: Hedpfxszk Nr Ue Aa Ejfi - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for workpieces with an edge thickness of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 rollers for better workpiece guidance - Edge feed, operating in synchrony with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with cutter (for edges that can be cut) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber backing - Digital counter for height adjustment - Direct glue application to the workpiece: Glue tank is leak-proof with glue reservoir from below and fast heating time after machine shutdown Hfjdszk Nmropfx Aa Eoi - Edge trimming unit: - for the front and rear edges of the workpiece - automatic scanning of the workpiece - pneumatic trimming with cutter for edges that can be cut - Edge milling unit - with vertical scanning and horizontal guidance - reproducible adjustment via digital counters - 2 high-performance 0.4 kW high-frequency motors - continuously adjustable from 4000 to 18000 rpm - Milling cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Workpiece support, continuous, approx. 1800 mm long - Workpiece support rail, approx. 300 mm extendable - Rotatable film plate Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 - 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 - 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Heating power of glue tank: 2.7 kW - Heating time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total connection: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film plate): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2006, Used machine Year of manufacture: 2006 Condition: completely overhauled Equipment and technical data: - fitted with new glue application system - manually adjustable infeed fence - milling unit 1961 - edge feeder 1903 - glue application station 1906 with tracking nozzle - pressure unit 1816, pneumatic - end trimming unit 1822 - milling unit 1942 M for radius, chamfer, flush trimming - complete air nozzle - scraper unit 1929 - chip collection box - surface scraper 1964 - extraction hood set - complete safety covers - total length: 5,291 mm - workpiece thickness: min. 6 / max. 50 mm - edge band thickness depending on configuration: 0.4–5 mm - max. edge band height: 55 mm - minimum edge band strip length: 350 mm - max. edge band overhang/height per side: 3 mm - minimum workpiece width: 60 mm - minimum workpiece length: 180 mm - feed speed: 12.5 m/min - extraction: - jointing/milling unit: 900 m³/h - milling unit: 280 m³/h - scraper unit: 280 m³/h - static vacuum: - jointing/milling unit: 1,490 Pa - milling unit: 1,650 Pa Hfsdpfx Ajzk Nlhea Esi - minimum air velocity: 20 m/sec - jointing/milling unit connection: 70 mm - scraper unit connection: 70 mm - compressed air: 6 bar Availability: short notice Location: Röllbach

Condition: good (used), functionality: fully functional, Band-A-matic F117S 220 V, single phase Fully operational Made in Japan Suitable for packaging meat, poultry, fish, cheese, and other food products Hodpezkwdfjfx Aa Esfi Available for inspection and testing

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hfodpfx Aasxy Tm Ij Eei

Condition: used, Year of construction: 1985, edge thickness 0,4 - 12 mm work piece thickness 10 - 55 mm work piece length min 160 mm work piece width min 65 mm feed speed 13 m/ min compressed air 7 bar machine length 5420 mm weight 1950 kg glue pot with quick melt system glue application roller wit left and right turning edge magazine for PVC and strips motor height adjustment for pressure beam pneumatic pressure rollers for edge magazine control panel, rotatable Hodpfoc Tmygox Aa Esfi all aggregates in-line controlled cutting milling combination with 2 aggregates, 1st aggregate straight, 2nd aggregate radius and phase milling tool draw blade buffing unit central lubrication for transport chain quick change system edge control system with error msg IR heater CE Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Hfjdpofbr S Rsfx Aa Eji • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2002, edge seize 0,2 - 12 mm work piece dimension width min. 70 mm height min. / max. 8 / 42 mm length min 160 mm (strips) length min 60 mm from roll Durchlaufgeschwindigkeit: 12 m/ min glue coating with roller working height : 880 mm compressed air 6 bar,1/4 Zoll suction connection, DM 160 mm dimensions: L x W x H = 5600 x 950 x 1300 mm weight: ca. 2200 kg total conection: ca. 11,5 kW, 400 V, 50 Hz machine equipped with: - double top roll pressure with electric height adjustment - autom. roll magazine for rolls up to 800 mm DM, pneumatic cutting up to 3 mm - autom. infeed fence - no adjustment of edge seize premilling aggregate with 2 HF-motors 1,5 kW, 12000 n double end trim unit Hsdpfx Ashy Tlrea Eofi - 2 HF-motors 0,2 kW, 12.000 n 2 autom. positions = 0 + 3 deg. flush trimming aggregate with 2 HF-motors 0,7 kW, 12.000 n radius trimming unit - with2 HF-motors 0, 3 kW, 12.000 n, radius scraping unit, autom. set in flat scraping unit Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, The model ME 40TR is SCM’s ‘bestseller and in this category offering unrivaled price / performance ratio. We can offer the following new machine SCM me 40tr, CE Volt 400 EU, frequency 50 Hz edge thickness coils 0,4 - 3 mm max. edge thickness strips 5 mm min. – max. work piece thickness 8 - 50 mm feed speed 9 m/ min glue pot unit 0,18 kW, capacity 0,8 kg premiling aggregate 2,2 kW, 9000 U/ min end-cutting unit with "Radius" allows you to make a radius on the corners of the edged panel trimming unit 2 x 0,35 kW, 12.000 U/ min Hodpfx Aec S Di Rja Ejfi OPTIONAL device for panel preheating edge scraping unit flat scraping unit grooving unit 1,1 kW, 12.000 U/ min, notch width 4 mm brushing unit with 2 independent motors magazine for strip edges kid for quick exchange of glue unit ...

Condition: excellent (used), Year of construction: 2007, Edge thickness 0.2 - 12 mm Workpiece thickness 8 - 52 mm Workpiece width min. 70 mm Workpiece length min. 150 mm Automatic edge magazine milling unit 2 x 1.5 kW, application-controlled Cut-off unit 2 x 0.3 kW Flush trimming unit 2 x 0.7 kW, scanning on one side Fine trimming unit 2 x 0.35 kW, tiltable 15/ 30/ 45 degrees Fine trimming unit 2 x 0.3 kW, R=2, scanning on both sides Corner copying unit 2 x 0.3 kW Scraper unit, autom. in/ out Flat scraper unit Buffing unit 2 x 0.2 kW, oscillating 5 x spray device (2 x release agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed 10 - 14 m/min COMBI MELT gluing part for EVA/ PUR, volume 1.5 l CE mark Total connection 12.6 kW Dimensions L x W x H approx. = 6120 x 840 x 1500 mm Weight approx. 2,900 kg Hfsdpjlc Ewijfx Aa Eoi

Condition: used, Year of construction: 1991, The machine has been in operation. The glue tank was overhauled approximately 2 years ago. The pressure rollers should be replaced. The units can be used well as spare parts. Used Manufacturer: Ott Type: Kantomat K 5 Year of manufacture: 1991 Machine no.: K 5200 Granule quick-heating tank Feed rate m/min: 12 / 18 Solid edges up to mm: Edge banding from roll up to mm: 3 Swiveling edge banding unit: Type K 14 Flush trimming Flush radius trimming Radius drawing blade controlled Edge buffing, oscillating Automatic edge magazine Large roll support Edge thickness mm: Workpiece height mm min / max: 10 - 60 Workpiece width mm min: 60 Workpiece length mm min: 160 Exhaust connection mm: 160 Space requirement approx. L x W x H mm: 5400x1100x1400 Weight approx. kg: 1800 Total connected load kW: Location: 97447 Gerolzhofen, free loading, unpacked Hfodpfx Aszkl H Uja Eji Handover in the current condition as inspected, without guarantee or warranty.