Used Hans Weber Maschinenfabrik Adapter For Extruder Weber Ds-85 for sale (16,504)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Hnodpfozizkysx Ap Hst Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Hodoz A R Irspfx Ap Hsnt Horizontal pressure force: 100 tons Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 1,100 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 4,000 mm, total width: 6,000 mm, table load: 1,500 kg, spindle speed (max.): 5,500 rpm, number of slots in tool magazine: 240, tool weight: 60,000 g, product length (max.): 6,000 mm, number of axes: 4, This 4-axis Burkhardt-Weber MCX750 M2 was manufactured in 2011. It features a substantial X-axis travel of 1100 mm, Y-axis travel of 900 mm, and Z-axis travel of 1250 mm. The machine has a maximum pallet load of 1500 kg and a magazine capacity of 240 positions. The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Contact us for further details. • Maintenance contract: Yes • Utilization: 70% • Shifts: 2 • Number of revolvers/magazines: 1 • Magazine capacity: 240 positions • Pallet size: 800 x 800 mm • Drive power: 50 kW • Maximum torque: 1650 Nm • Maximum tool length: 750 mm • Maximum tool diameter: 350 mm • Rated voltage 3x 400 V • Frequency 50 1/s • Full load current 150 A • Rated current main drive 85 A • Connected load 80 kW 100 kVA • Operating voltage 400 V • Control voltage 24 DC • Frequency 50 Hz • Power 2.9 kW • Current 11.0 A • Refrigerant R134a Hodpfszl S Uhex Ap Hent • Filling quantity 3.0 kg Additional equipment • OPTIONAL: Tooling package (approx.): • Group 1: 700–750 tools (Ø up to 124.9 mm) • Group 2: 100–150 tools (Ø 125–224.9 mm) • Group 3: 50 tools (Ø 225–350 mm)Geometry readjusted (done by official Burkhardt-Weber)The machine is linked to a Burkhardt-Weber MCX750 M2 (2011) and a pallet magazine and set-up station (12 positions + 2 positions per machine + 2 set-up stations) Technical Specification Taper Size SK 50

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1877, cutting height (max.): 300 mm, total length: 18,500 mm, total height: 2,550 mm, cutting width (max.): 450 mm, total width: 2,400 mm, control cabinet width: 400 mm, saw blade diameter: 735 mm, overall weight: 11,000 kg, control cabinet length: 1,600 mm, control cabinet height: 2,400 mm, power: 15 kW (20.39 HP), type of input current: three-phase, Equipment: safety light barrier, Equipment: 01_ Cross-sections 20 x 60 to 300 x 450 mm 02_ Feed conveyor, transverse, 5 strands, 2.2 m 03_ Undercutting miter saw 04_ Universal milling machine ----> Roller cutter ----> Finger cutter Hnedpfezv Tt Hjx Ap Hst 05_ Combination support for vertically operating tools ----> 1x Drilling machine ----> 1x Finger milling machine 06_ Combination support for horizontally operating tools ----> 2x Drilling machine ----> 1x Grooving machine 07_ Beam turning station, fully automatic Machine installation: 08_ Substrate, foundation: ----> The floor slab must have a thickness of at least 10 cm (with corresponding good reinforcement) This should be level and suitable for anchoring. 09_ Power requirements, type, quality, quantity: 09.1_ Electrical: ----> Voltage: 400/230V, 3/N/PE ----> Fuse rating: 3 x 63A ----> Frequency: 50 Hz ----> Peak demand: 15 kW The mains voltage must be constant and uninterrupted within the specified tolerance range! 09.2_ Compressed air: ----> Flow rate: V < 600 l/min ----> Pressure: Operating pressure p = 8.5 bar; Maximum permissible pressure p = 10 bar Important: The control system was converted by Hundegger from MIPPS to CAN control in the fall of 2020!!

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor Hodpfx Apszxxife Hont *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: used, Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg Hsdpfx Apjq Nqxwo Hent -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. The machine is in perfect working order and can be inspected while powered on. Hnjdpfx Aszzd Rgep Hot

Condition: good (used), Year of construction: 1994, Model: NE 12 Screw type: Single screw Year of construction: 1994 Screw diameter: 130 mm L/D ratio: 30 L/D Hnedpfxeyxpbuo Ap Hot Drive power: 350 kW Including: • Machine was in production when dismantled • Machine was producing 710 mm pipes • Output on HDPE approximately 1,000 kg/hour • 800 mm extrusion head

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 1,870 h, screw conveyor diameter: 63 mm, Krauss Maffei KMD-63K extruder in very good condition for sale. Hnedpfx Asz Ag Tgep Hst The machine comes from a technical center and has only 1,870 original operating hours! All functions are in working order. An inspection with a test run without material is possible at any time. Technical data: - Year of manufacture: 2015 - Operating hours: 1,870 - C5 control system - Twin-screw, single-conical design - Closed screw cooling system - Standard profile screw - Motor power: 38.3 kW - Weight: 2,700 kg Delivery includes all documents, hoppers, and adapters. Loading with a forklift. Delivery is possible by arrangement. Export documents and sea packaging are also available. Please do not hesitate to contact us with any questions.

Condition: excellent (used), Year of construction: 1998, Great opportunity! Weber rescue set, first owner, in top condition, with cutter and spreader. From the former inventory of the town of Harsewinkel, we can offer you this top-maintained rescue set from the world-renowned brand "Weber," first owner! The E45L unit was put into service by the town of Harsewinkel in 1998, along with the S 130 rescue cutter and the SP 30 LS spreader. The rescue set was used only sparingly, inspected annually until 2026, and decommissioned in 2026 due to a new acquisition. All devices are in excellent optical and technical condition, have no significant damage, and only show minor scratches or other normal signs of wear, which, however, do not in any way restrict the use of the devices – see pictures! The cutter has a damaged blade – a new blade is included! Pressure: 630 bar Power supply: 230 volts All devices are equipped with single couplings. 1 EURO 120x80x80cm, approx. 100 kg Pickup during our regular business hours. Please arrange an appointment! Hodpfez Atnqjx Ap Hent Shipping via a freight forwarder is possible for an extra charge. The sale is exclusively for commercial businesses. You will receive an invoice without VAT, as the item comes from a public institution. Private buyers have the option to purchase the device "on behalf of a customer"; a direct commercial sale to private individuals will not take place! The goods are sold with the exclusion of any warranty or liability for defects. This exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as to any injury to life, body and health. For questions regarding prices or technical details, please do not hesitate to contact us at the address provided.

Condition: used, Year of construction: 2018, operating hours: 4,500 h, MT Cut UDS1785 Travel distances: X 850 mm Y 520 mm Z 610 mm Tool interface: HSK 63 Rapid traverse rate X/Y/Z: 32 m/min Tool magazine: 60 positions Machine weight: 6,800 kg Hnodpfx Aey Ug Epsp Het Control system: Heidenhain TNC 640 Coolant through tool, 50 bar Spindle speed: max. 12000 rpm Articulated band conveyor, discharge to the left Air through the spindle BLUM A2, laser system for tool measurement Measuring probe: Heidenhain TS 460 Rotoclear, rotating viewing window Emulsion mist extraction, SARA UC2D Year of manufacture: 2018 Spindle operating hours: 4512

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Sink Float Tank Centrifuge Washer Dryer Extruder Hsdpfx Apszylxie Hent Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: new, Year of construction: 2018, New R&B Plastics Machinery MAX 5-Extruder System Heavy-duty, purpose-engineered multi-extruder system manufactured by R&B Plastics Machinery, consisting of four MAX 1-1/4" × 30:1 extruders mounted over one MAX 2" × 24:1 main extruder, complete with specialty mounting structure, material loaders, heated adapters/hoses and centralized Allen-Bradley PLC controls. The system was fully assembled, integrated, inspected and pre-shipment tested at R&B's Saline, Michigan facility and has never been placed into production. Extruders (4) R&B MAX 1-1/4" × 30:1 X102 or equivalent bimetallic barrel liners Interchangeable standard-output screws Rossi gearboxes with high-temperature Viton seals 5 HP Marathon AC motors Four heat/cool barrel zones Heaters, high-speed blowers & dual thermocouples Rupture discs & pressure transducers Watlow melt-temperature probes & mica band heaters Stainless-steel hoppers Adjustable 45° feed-throat/carrier assemblies (1) R&B MAX 2" × 24:1 Main Extruder Non-vented, air-cooled configuration MAX IMPACT high-output screw Hsdpfxozz Thbe Ap Hent Colmonoy 56 flight lands X102 or equivalent bimetallic-lined barrel 25-30 HP Marathon Blue Max TEFC motor Rossi helical gear reducer Maximum screw speed: 100 RPM Three individually controlled heat/cool zones Melt-temperature & pressure transducers Stainless-steel hopper and water-cooled feed section Multi-Extruder Mounting System Engineered for 4 × 1-1/4" extruders over 1 × 2" main extruder Heavy-duty welded mounting frame Individual adjustment posts & safety stops Specialty extended main base Material Handling & Transfer (5) Foremost B-6-2 self-contained vacuum loaders (4) R&B heated adapter assemblies (4) heated hose assemblies, up to 12 ft R&B MAX PLC Control System Allen-Bradley CompactLogix PLC 15" Allen-Bradley operator control screen (4) 5 HP + (1) 25-30 HP Allen-Bradley VFDs PLC-controlled extruder heating/cooling Air-conditioned main electrical cabinet EWON remote-access system Integrated wire trays and electrical distribution Designed for 380 V / 3 Phase / 50 Hz Open-architecture electrical drawings, machine logic and documentation Condition: NEW / Never Used Complete documentation and operating manuals available. Important Scope Information Profile/die tooling and water bath are not included. Proprietary zipper/profile tooling and associated proprietary components are not included. The control cabinet contains provisions for additional downstream equipment, including water-bath and winder connections; these provisions should not be interpreted as inclusion of that downstream equipment in this R&B system listing. Equipment is stored and ready for shipment. Inspection available.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 13,863 h, screw conveyor diameter: 90 mm, screw conveyor length: 2,880 mm, Krauss Maffei twin-screw extruder KMD90-32 in very good condition for sale. The extruder comes from a technical center and has seen little use. These are the original operating hours (13,863) from the first owner. An inspection with a test run is possible at any time. Technical data: - Year of manufacture 2004 - Original operating hours: 13,863 - Standard screw profile with up to 390 kg output per hour - C4 control system Hnedpfjz Ag Udjx Ap Hjt - Internal screw temperature control, welded screw tips - Including hopper, adapter, sensors, etc. - Screws and cylinder are in new condition. The screws have been removed and can be inspected on-site. Loading with a forklift. Delivery, export documents or sea packaging available upon request.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2026, Ball Mill for Powder and Mining Plant: Structure, Function, and Technical Details A ball mill is a key grinding machine widely used in mining, metallurgy, cement, chemical, and powder-making industries. It is designed to grind various ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, preparing materials for flotation, magnetic separation, or leaching processes. In powder production, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on a simple yet effective principle: as the cylindrical shell rotates around its horizontal axis, the grinding media (steel or ceramic balls) are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion causes both impact and abrasion, reducing the material to the desired fineness. The grinding process can be performed in dry or wet conditions depending on the application. Structural Composition A standard ball mill consists of several main components: Feeding part: Equipped with a feeder or screw conveyor to ensure uniform material input. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel balls or ceramic balls of different diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details Typical Specifications: Feeding size: ≤25 mm Hnedpjq Nf U Esfx Ap Het Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Suitable for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining Plants In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. Common Applications: Gold, copper, iron, and zinc ore grinding Cement clinker and slag processing Silicate and ceramic powder production Coal and mineral powder preparation Conclusion A ball mill is an indispensable piece of equipment in both powder production and mining beneficiation plants. Its ability to grind materials into fine, uniform particles makes it vital for downstream processes such as flotation, sintering, and chemical reactions.

Year of construction: 1994, condition: used, weight 2,2 t extruder diameter x mm x +++++ Please note: Hsdpfex U A Iaex Ap Hent The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, 85 degree H220mm R0.8mm Amada/promecam/European style Hnjdjqxq Nwspfx Ap Hst

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Process Times Hnedpfoxu Upmox Ap Hjt Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. Hnjdezxhfiopfx Ap Hjt This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Hnedezwgiqopfx Ap Hot

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Hodpfeb Umtkex Ap Hsnt

Year of construction: 1980, condition: used, TAŚMÓWKI FOR FOAM BULLMER WERK 7759 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Cost of delivery Client cover startup type Hnjdpscr Ru Dsfx Ap Het negotiated Description Comments MACHINE FOR CUTTING UPHOLSTERY FOAM ENGINE 1 kW, 220/380 VOLT, HAS A NOSE-STONES TO SAW TAPE LENGTH WITHOUT END 4050 mm, cutting width 1100 mm, table length 2250 mm, table width 1170 mm

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz Hnsdpfjzl U Uwex Ap Het • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 18738, functionality: fully functional, operating hours: 600 h, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,800 mm, height adjustment type: electric, total height: 1,310 mm, total length: 1,510 mm, total width: 3,880 mm, overall weight: 750 kg, space requirement length: 3,880 mm, space requirement width: 2,352 mm, table length: 2,800 mm, table height adjustment: 220 mm, table width: 950 mm, Equipment: documentation/manual, Johannsen long belt sanders Type T 85/PNEUMA Year of construction 1990 Hnjdpfx Apeugvxxs Het Operating hours approx. 600 Machine data: Footprint total length 3880 mm Depth 1510 mm Height 1310 mm Space required Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: - Pneuma sanding unit - 4 sanding shoes - Lighting in the belt cover - Vacuum suction clamping device incl. vacuum pump - Belt blow-out nozzle - Pneumatic turntable - 2 belt speeds - Pneumatic belt tensioning - Electric table lift - Rack with approx. 100 sanding belts / belt dimensions 7800 x 150 mm Filter system: Base area 1600 x 960 mm Height 2850 mm 18 fine filters Machine is fully functional Condition very good

Condition: like new (used), functionality: fully functional, 5 pcs drill rod adapters SANDVIK Model: T51 HL1000PE D52 L840 Part no.: 7306-6019-02 Hedeyr Iqgopfx Ap Hsnt Total length: 840 mm Suitable for drilling rigs with long extractor (52 mm bearing diameter)