Used Graule Gehrungs-Kapp- U. Schiftersäge, for sale (40,712)

Condition: new, Year of construction: 2026, machine/vehicle number: ZS170N mit ES-F3, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 170 mm, cutting width (max.): 410 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 40 mm, actuation type: manual, total length: 6,400 mm, total width: 1,200 mm, total height: 1,550 mm, table height: 920 mm, Equipment: CE marking, Mobile saw carriage, overall length 6400 mm, with a Graule SZ170N saw mounted on it. Stop roller track with folding stop and scale on the left side, 3100 mm, measuring length on the folding stop 3050 mm + attached extension with stop and scale for a measuring length up to 5000 mm. Feed roller track on the right side, track length 3000 mm. Track width on the left and right sides is 500 mm. Crosscut and miter circular saw ZS170 N, cutting height at 90° is 170 mm, at 45° inclination is 115 mm. Cutting length is 410. Machine can be tilted on both sides using a hand crank, up to 45° to the left and up to 60° to the right. Machine with carbide-tipped circular saw blade for wood, 420x4.0x40 mm, 48 teeth. Bwodpjzwn T Rsfx Albot

Condition: used, Year of construction: 2013, max. wheel diameter 260 mm gear width 320 mm Bsdpfxjx R U Hge Albjwt max. module 4,5 min. module 0,5 Control SIN 840D max.helical angle +/- 45 ° total power requirement 68 kW weight of the machine ca. 15,50 t dimensions of the machine ca. 3,25 x 3,25 x 3,30 m Fire extinguishing system Siemens Sinorix TM Knoll Filtering system VL1500/8000 year 2017 Wekal loading cell

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Bwsdey S Rq Ropfx Albjt Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 1995, Motor: 3.0 kW Can swivel on both sides Cutting height: 170 mm, with stand Bwsdpezd Tgiefx Albst Location: Nattheim

Condition: used, Year of construction: 2012, Technical details: max. wheel diameter: 260 mm Bedpoy Amllofx Albswt gear width: 320 mm max. module: 5 weight of the machine ca.: 21 t dimensions of the machine ca.: 8,71 x 5,97 x 3,49 m no. of teeth: 1...999 max. helix angle: +45/-45 ° pitch min.: 0,1 mm pitch max.: 1000 mm X-axis: 345 mm y-axis: 250 mm Z-axis: 320 mm b-axis: 360 ° c-axis: 360 °

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand Bwsdpszu Azdsfx Albot

Condition: used, Year of construction: 2012, max. wheel diameter 300 mm gear width 320 mm max. module 10 min. module 0,5 control Siemens SIN840D max.helical angle 45 ° frequency 50 Hz voltage 400 V main fuse 125 A x-axis 270 mm y-axis 250 mm z-axis 320 mm A - axis +/- 45 ° B - axis 360 ° C-axis 360 ° Bjdpjx R U Hajfx Albjwt total power requirement 89 kW weight of the machine ca. 23,5 t dimensions of the machine ca. 11,2 x 5,5 x 2,9 m automated Oil slinger station EWAB workpiece storage Hoffmann coolant filter system HSF 100 SE/K Minimax fire extinguishing system W+W air filter system Promot Automation "Cellmaster" (3 cells) year 2019

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Bjdpsy Dda Ajfx Albjwt Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: 27994, 12-needle universal portal embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, complete with full machine equipment for ready-to-use operation: Control unit: T8 operating panel Bsdeyvuxmepfx Albewt Thread trimmer: integrated Embroidery speed: max. 1,000 stitches per minute (standard); max. 1,000 stitches per minute (cap) Number of embroidery heads: 4 Number of needles: 12 Head spacing: 400 mm Embroidery area: 405 x 300 mm (tubular goods); 500 x 1,600 mm (border); 70 x 360 mm (cap) Embroidery depth: 500 mm Power supply: single-phase AC 230 V, 50 Hz Basic machine price includes: Thread trimming unit Light barrier Cross laser 4 x cap frame drive 1 x cap device 8 x cap frame windows 360 mm / 270° 1 x border frame 1 x standard mounting clips for border frame 1 x table top

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Bedpfxoy Hqdaj Albewt Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Includes towing brake. Bwodey Tt Hdjpfx Albot

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Bsdpfx Alexvaw Sobowt

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Special equipment 1019 Machine tiltable on both sides from the front via hand crank 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative Bwsdpfxextpuus Albst

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 600 mm, number of axes: 5, This 5-axis Kapp RNS 55 was manufactured in 2005. It features multiple grinding spindles, including three with a diameter of 20 mm and seven with a diameter of 40 mm. The machine is CE marked. If you are looking to get high-quality grinding capabilities, consider the Kapp RNS 55 cylindrical grinding machine we have for sale. Contact us for further details. • Machine Type: Rotor Grinding Machine • CE Marked • Grinding Spindle Ø20: 3 pcs • Grinding Spindle Ø40: 7 pcs • V-Belts (Various Sizes): 55 pcs • Spindle Covers: 11 pcs Bsdpfx Alozimrcobjwt • T-Slot Nuts: 7 pcs • Limit Probe Complete: 2 pcs • Hoffmann Mist Band Filter: 1 pc • Without Electrical Control Cabinet

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas Bsdpfx Ajzubtljlbowt • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Transport and loading can be organised throughout Europe at an additional cost upon request. Bsdpfozvfdkox Albowt Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: excellent (used), functionality: fully functional, Roller conveyor with adjustable end stops, Graule RLH, 3 meters long. Bwodpfx Aloztqfhjbot

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Bsdpfx Ajcnz Rvolbswt Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Year of construction: 2021, condition: used, Roller conveyor length: 3000 mm Bedpfx Aley A Hk Iobjwt Roller conveyor width: 400 mm

Condition: used, Year of construction: 1988, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Graule Type: AGT Bsdpfx Alozkvzpjbowt Year of manufacture: 1988 Machine No.: 05 Motor kW: 1.6 kW, 220 V Swivels to the right up to °: 45 Swivels to the left up to °: 45 Tilts up to °: 45 Machine base is mobile Cutting height mm approx.: 85 Cutting length mm approx.: 380 Blade diameter mm approx.: 300 Saw blade bore mm approx.: 30/40 Dust extraction connection mm: 80 Space requirement approx. L x W x H mm: 600 x 900 x 1000 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: excellent (used), functionality: fully functional, tool diameter: 450 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 2,800 rpm, overall weight: 400 kg, cutting height (max.): 153 mm, saw blade speed: 2,800 rpm, mount diameter: 40 mm, power: 0.003 kW (0.00 HP), Equipment: rotational speed infinitely variable, GRAULE facade saw type AS 450 Bwsdpfx Alothdrwobot transport 350 EUR

Condition: new, Year of construction: 2026, Miter and compound miter saw with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide for the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontal adjustable fixed stops lower saw blade guard, can be connected to a dust extraction system Model-----Motor-----Speed-----Cutting length ZS 170: 400 V / 2.0 kW--3500 rpm---410 mm (at 90 degrees) Model-----Cutting height----Miter range horizontal ZS 170 ----- 170 mm----- 45 degrees -90 degrees Model-----Saw blade-----Dust extraction port-----Weight ZS 170 -----420 mm----- 100 mm ----- 120 kg Accessories available upon request: Roller conveyor / fence type RO, RL, RLK, RLH and RLHK for processing aluminum and PVC profiles and for wood profile board processing the modular roller conveyor system can be supplied as: 3 m type RO: infeed roller conveyor with at least 2 support feet 3 m type RLK: roller conveyor fence with a fence slide that can be folded back - Machine stand - Main switch with lock - Infeed roller conveyor Ro-St60 3 meters, right - Roller conveyor RLK-ST60 L 3.0 meters, measuring length Heavy-duty fence/roller conveyor Bodpjcnz N Hefx Albowt mm - scale on the rear beam, measuring slide with magnifying glass and fence flap - Saw blade 420 x 3.5 x 40 Z 84 Neg Location: In stock at 54634 Bitburg - free loading - - immediately available - Location: In stock at 54634 Bitburg - free loading - - immediately available -

Condition: new, Year of construction: 2026, functionality: fully functional, 7.5 hp 200 mm cutting height 1 hydraulic feed brake Tilts to the left up to 60°, to the right up to 30°, can be tilted from the front using a hand crank When tilted at 45°, the cutting height is 140 mm Bwsdpfx Asb Dkyvjlbet Swivels to the left up to 60°, to the right up to 45° Cutting length at 90° - 420 mm Cutting length at 45° - 295 mm Length of the outfeed roller conveyor with scale and stop guide on the left - 6000 mm Length of the infeed roller conveyor 2000 mm, mounting side on the right Machine is fully mobile, overall length 9000 mm Can be tilted from the front with a hand crank; the machine is also available with a 215 mm or 240 mm cutting height and other options.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Bwsdpfxjzwm Aks Albet Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Bodpjzrywqefx Albewt Cutting length ~ 460 mm Technical data: - Motor: 2 kW - Connection: 380 V