Used Fpz Seitenkanalverdichter Scl K11-Ms Mor G for sale (38,408)

Condition: ready for operation (used), Grundfos MG 112 MS 2-28 FT 136-C three-phase motor SN 1100029148, used, minor signs of wear, 100% functional, scope of delivery as per photos Fgjdpfxeqyq Nqs Albjg

Condition: ready for operation (used), Heidenhain ROD 780 36000 03S12-03 K11 .383 600-14 rotary encoder, serial number: 27396641B, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos Fgodpfsy Nqtajx Albjg

Condition: ready for operation (used), Sumitomo Type: V63M/4 Motor SN:HN0341440 + CNFMS018-6105DAEB-319/G V63M/4, used, minor signs of wear, 100% fully functional, delivery as shown in the photos. Fsdpfx Aex Dwfpslbjgg

Condition: used, ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools Fgedpfxszbx Dce Albeg

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Fgsdogqg Sgjpfx Albsg

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Fgjdpegmi Unsfx Albog

Condition: ready for operation (used), * Brand: MS * Type: dewatering unit Fedpfxjy R Tlhs Albogg * Dim. dewatering screen: 1800 x 700 mm _ 1 deck. * Driving: 2 pieces vibration motors of each 1,6 kW * Incl.: cyclone, collection tank and pump.

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 20 kg, warranty duration: 12 months, type of input current: AC, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, table load: 20 kg, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, High-precision optical measuring device with active vibration damping for use close to production. Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Factory-refurbished premium multisensor measuring center with guarantee and warranty rebuilt 2025. INCL. latest SW update, 18-month free SW update service, free lifetime SW hotline and user support. Delivery with factory service or forwarding agent, worldwide. Online - optionally on-site demos with customer parts, application-related advice from accredited Profitech measuring laboratories during project planning. Complete service: - delivery, assembly, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual training programs can also be booked as online courses. Rent-hire purchase or financing possible directly from Profitech and without a financial institution. Measuring device can be individually configured to customer requirements Measuring range of individual sensor: 250x200x200mm Measuring range of all sensors: 250x200x200mm Factory overhaul (Mahr Competence Center): 2024 New Windows 10 evaluation station Software: OptiCheck3D Version 4.5 Ultimate Maximum workpiece weight (glass plate): 15kg Scale resolution: 0.1μm Fjdpodzzqwofx Albegg Maximum speed: 150mm/s Dimensions: 800x700x1980mm Weight of measuring device: 450kg Weight of control: 90kg High-precision CMOS camera for digital measurements Renishaw TP20 touch probe system with SF insert module Accuracy according to VDI/VDE 2617 Sheet6, ISO 10360-2: U1=1.9 + L/200; U2=2.4 + L/150 ####Symbolic image of the manufacturer####

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Equipment: documentation/manual, type plate available, Liquid smoke dosing device for a smoking chamber; the device is designed for dosing into two chambers. Fgedpsw Emd Hofx Albsg

Condition: excellent (used), 3-phase DC spot welding machine, A/DH version Fjdpfx Alev Uwyrsbjgg Brand DALEX Type PMS 14-5 G3 Thrust: 550 mm Rated power at 50 & duty cycle: 150 kVA Secondary short-circuit current: 65 kA Secondary open-circuit voltage: 3.35 - 6.7 V Electrode force: 80-1,200 daN Weight: 1,620 kg with double-stroke cylinder 4-position switch Main switch Mounted control cabinet according to VDE 0110 with 100-program MPS 8043/1 welding controller

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. Fedpfozx Ek Asx Albogg The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries.

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar Fgjdpfx Ajzr U Dlslbjg - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Year of construction: 2018, condition: new, FireMaster Morgan Thermal Ceramics FireMaster® Marine Plus FM-MP69/16X14640X610S SUPER DISCOUNT! 19 Euro pallets available 16 boxes on each euro pallet x 19 euro pallets = approximately 304 boxes Material dimensions: Thickness 13 mm Width 620 mm Length 14,640 mm Density kg / m3: 96 Price per box 100 EUR + VAT In total there are about 304 boxes. Total price 30,400 Euro + VAT, negotiable , FCA: Satu Mare / Romania Manufactured from FireMaster® Plus fibre, FireMaster® Marine blanket is a highly insulating blanket especially developed for fire protection Plus applications that are very space or weight sensitive Classification temperature FireMaster® Marine Plus blanket: 1200°C (2192°F) Fire reaction properties Non-Combustible in accordance with IMO FTP Code Part 1 Index < 0.5 when tested in accordance with UK MOD Defence Standard 02-713 Class A1 Reaction to Fire in accordance with EN 13501-1 Thermal insulation performance Thermal insulation at ambient temperatures R Values (m² K/W) and corresponding U values (W/m²K). For densities above 80 kg/m³ the values for 80 kg/m³ may be used Basis Thermal conductivity measured at 10°C using BS EN 12667 method Fjdpfx Aloh Rawuobjgg 48 kg/m³ 0.0321 W/mK 64 kg/m³ 0.0319 W/mK 70 kg/m³ 0.03164 W/mK 80 kg/m³ 0.03144 W/mK Thermal conductivity at high temperatures Thermal conductivity (W/mK) at mean temperature measured using ASTM C201 method Please check the attachment with the technical data. We reserve the right to make mistakes, changes and prior sale Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2009, operating hours: 25,000 h, functionality: fully functional, Control system: MSX-701 IV (based on Fanuc) Spindle hours: approx. 18,400 Work area & travel ranges Travel range X/Y/Z: 560/560/630 mm Pallet size: 400 × 400 mm Max. workpiece dimensions (D × H): Ø 630 mm × 900 mm Max. pallet load: 400 kg B-axis (table indexing): 1° (standard) or 0.001° full NC (DDM option) Main spindle & drives Spindle speed (standard): 14,000 rpm Tool holder: SK-40 and BT-40 Spindle power (30 min / continuous): 18.5 kW / 11 kW Max. spindle torque: 120 Nm Rapid traverse rate (X / Y / Z): 50 m/min Max. feed rate: 50 m/min Fgedpfx Aozxrawolbeg Number of tool positions in the magazine: 120 Max. tool weight / length: 8 kg / 400 mm

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 0171.11.14.40, General Information Manufacturer: Mora Type: 0171.18.14.40 Year of Manufacture: 1992 Includes Wenzel controller Measuring Table X = 4000 mm Y = 1500 mm Measuring tower height Z = 2900 mm Measuring Range X = 3500 mm Y = 1500 mm Z = 1800 mm The machine can be modernized with new software according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! Fgsdpfxsdzlnkj Albeg (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!)

Condition: new, External dimensions: 2300 × 2450 × 2340 mm FGRi series Fgedpfjzabf Tsx Albjg Finish: Mosaic Dome Energy source: wood and gas Total gas power: 43 kW Natural gas consumption: 4.6 m³/h LPG consumption: 3.4 kg/h Gas connection: 3/4” G Capacity: 14 pizzas Ø 30 cm Productivity: 240 pizzas/h Motorized rotating hearth Variable speed and direction Two independent gas burners Separate vault and hearth heating Radiant atmospheric burners Burners designed by Morello Forni High refractory mass Insulation: bricked shell External finish: Mosaic Dome Dual manual/automatic mode Manual mode with flame modulator Analog thermostatic controls (optional) Unassembled shipping: not available Mouth width: 820 mm Net weight: 4000 kg General presentation The FGRi150 Coupole Mosaïque is a hybrid wood & gas rotary oven intended for pizzerias, Italian restaurants, franchises, and catering establishments that want to combine high cooking capacity with an elegant presentation. With its Mosaic Dome finish, it is suitable for locations where the oven is visible and contributes to the image of the concept, while maintaining the performance of the largest FGRi format. Why this model stands out This oven cooks 14 pizzas Ø 30 cm and achieves a stated production of 240 pizzas/h. It can operate on wood alone, gas alone, or in a combined wood + gas mode. Its gas-heated, motorized rotating hearth, with variable speed and direction, helps to distribute cooking over a large surface area. The two independent burners, dedicated to the vault and the rotating cooking surface, promote thermal stability when batches are cooked consecutively. Key advantages High capacity of 14 pizzas Ø 30 cm, suitable for high volumes. Stated production of 240 pizzas/h for peak service times. Hybrid operation: wood alone, gas alone, or wood + gas. Gas-heated rotating hearth for even cooking. Mosaic Dome finish with insulating shell and decorative cladding. External drawer for ash disposal and collection.

Condition: excellent (used), Year of construction: 2007, operating hours: 41,759 h, functionality: fully functional, machine/vehicle number: NH502GC0313, Equipment: chip conveyor, documentation/manual, CNC controller: MSX-701iA Axes X-axis travel mm: 630 Y-axis travel mm: 600 Fsdpfozyfyyex Albjgg Z-axis travel mm: 670 B-axis travel degrees: 360º (indexing 1º) Number of pallets: 2 Table dimensions mm: 500x500 Spindle Spindle speed rpm: 14,000 Tooling system Tool holder: BT40 Number of tool positions: 120 (60+60) Equipment Chip conveyor Warning light Knoll system, 750 liters Internal coolant supply

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, controller manufacturer: Mori Seiki (Fanuc), controller model: MSX-701 (Fanuc 31i), workpiece height (max.): 1,450 mm, workpiece diameter (max.): 1,450 mm, workpiece weight (max.): 2,200 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 4,300 mm, spindle speed (max.): 8,000 rpm, coolant supply: 70 bar, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Mori Seiki. The machine is fully functional, in good condition, and can be inspected and tested at our facility. Manufacturer: Mori Seiki Model: NH8000 DCG Year of manufacture: 2008 Control unit: MSX 701-III Technical specifications: Travel distances X-Y-Z: 1400 x 1200 x 1350 mm B-axis: 0.001° Feed rate X, Y, Z: 50,000 mm/min Rapid traverse X, Y, Z: 50 m/min Pallet size: 800 x 800 mm Number of pallets: 2 Pallet change time: 16 s Max. workpiece weight: 2200 kg Max. workpiece diameter: 1450 mm Max. workpiece height: 1450 mm Spindle speed: 8000 rpm Spindle power: 37 kW Tool holder: HSK-A100 Tool magazine: 60 positions Tool change time: 1.9 s Distance between pallet surface and spindle center: 100–1300 mm Distance between pallet center and spindle nose: 100–1450 mm Fedpfsyrdn Usx Albogg Total power consumption: 86 kVA Machine dimensions: approx. 7200 x 4300 x 3850 mm Transport dimensions machine: approx. 7000 x 3400 x 3300 mm Machine weight: approx. 30 t Total weight incl. magazine and accessories: approx. 37 t Scope of delivery includes: 1x Mori Seiki NH8000 DCG machine 1x Matrix tool magazine 1x chip conveyor 1x coolant system 1x transformer Various tool holders

Condition: excellent (used), Year of construction: 2010, FANUC MSX-711 Mapps 4 control with B + C axis Working travels 500 x 350 x 510 mm Table swivelling -180°/+160° Table rotating 360° Spindle taper HSK63 Spindle speeds -20'000 rpm tool changer 61 pos. Coolant through spindle 3D tracer M&H Tool lenght measuring device Fedezwt N Djpfx Albsgg Tool breakage control device MARCELS MASCHINEN CH

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 231200) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 Fgsdpfx Aljzwk Idobjg 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Fgodezx A Tbopfx Albog Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5axes simult. Spindel A2-5 40 pos. ATC type Capto C5 Bar-feeder LNS MoveS2 INVENTORY NR.2180207, MACHINE EQUIPPED WITH : Fsdpfx Aed Hkucjlbsgg Control MSX-711 (FANUC 3Li) for 5 axes simultaneous machining, color screen 15’’ and dialog system MAPPS III Memory capacity up to 1000 programs Options : tools correctors (milling spindle), B tools life gestion, input of tools correctors G10, 3 interpolations, variable thread step (G34), circular threading, personalised macro, high precision contouring control (control II contour AI), card ATA 1 GB, offset tool for 5 axes machining Chips conveyor (with chain) model/500 B-axis with direct motor (DDS) ATC type CAPTO C5/ 40 positions Tools to zero setting system with automatic arm for milling spindle High-pressure cooling system type KNOLL with 500L tank, pump and paper filtration, for cooling through spindle centre Cutting fluid coolant unit Type KNOLL Linear measuring system for Axes X1 / Y / Z1 Tool monitoring system through control of main spindle motor and feed motors Automatic workpiece measuring system with touch-test RENISHAW and macro B for use in Milling spindle Light signal Automatic machine stop Workpieces receptor vat Ø52mm, L120mm 10 additional M functions Flange for cylinder, threaded ring, traction tube, bore Ø 52 Clamping chuck HAINBUCH Spanntop Axzug Nova, with stop type 100 for pieces in chuck and for jobs in bars with passage, clamping head type 32, A2-5 direct mounting, adapter Hydraulic chuck KITAGAWA, type BB206A5, Ø170mm, A2-5 direct mounting, passage Ø52mm Bar-feeder LNS, Type Move S2 Diameter of roung bars : Ø8 – 80 mm, bars length : 700 mm – 1600 mm ; loading from the front ; longitudinal shift : 470 mm ; set of guidings Ø18-20 Ø24-26 and Ø28-30 ; pushers : 1x Ø 8 – 1x Ø 15 mm ; guiding devices for main spindle Ø 21 – 26 and 31 mm Fire extinctor through carbonic gas type Tyco KLA III with 10kg CO2 Aspiration system ELBARON RON/A 3000 D-2H with full rest

Condition: good (used), - Pneumatic Motor GAMOR - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale Fgedpfx Alozvnhfebeg PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Condition: good (used), Year of construction: 1963, Stroke = 250 mm On request, transport and loading can be organized across Europe at an additional cost. Prices excl. VAT Fgedpszvnd Tjfx Albjg Inspection possible by appointment. Contact us – our team will be happy to assist you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your production? Or do you want to sell your equipment? For further information or contact options, please use the contact form.

Condition: ready for operation (used), Year of construction: 2015, CNC Control: F31iA X mm: 560 Y mm: 560 Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Fedpfx Ajzu Tryolbegg Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Number of positions in tool changer: 60 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant: Yes