Used Etesia Hydro 124 Ds for sale (3,085)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands Gbjdpfx Aeyhcabok Uot - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: good (used), Year of construction: 2008, For sale: 1 unit Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Gbodpfezvniiox Ak Ust Z-axis (vertical): 265 mm X-axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive unit rated power: 16.8 kW Rated torque: 100 Nm Speed: 1,000 – 7,000 rpm Travel speed Z-axis: max. 30 m/min Travel speed X-axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Weight: 9,000 kg Complete documentation available. Note: The system will likely require some reprogramming, as it was previously integrated into a complete processing line. However, a stand-alone program is available. Transportation and loading can be organized Europe-wide at extra cost upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team will be happy to assist you. Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your machine? For further information or contact options, please reach us via the contact form.

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: RMS6, Versie 3.18, total height: 2,600 mm, total length: 4,210 mm, total width: 2,350 mm, table width: 405 mm, table height: 405 mm, table load: 800 kg, rotary table diameter: 405 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSKE40, number of spindles: 1, number of slots in tool magazine: 26, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Röders RFM 600-DS is a high-speed (HSC) milling/machining centre. This machine is designed for applications such as high-precision engineering, high speed cutting (HSC), and for small to medium-sized workpieces like mould parts, tools, injection moulding frames, precision components, housings, and complex geometries. Gsdpjxcvgijfx Ak Uobt The machine is equipped with a chip conveyor, Blum laser, 3D tool probe, Hirschmann 9000 zero-point clamping system, electronic handwheel, Extor extraction unit, and all original documentation. Weight: approx. 7000kg Dimensions: 4210x2350x2600 (LxWxH) For further information such as positioning accuracies, see last image!

Condition: good (used), Year of construction: 1989, operating hours: 24,048 h, Brand: Hans Weber Maschinenfabrik GmbH Type: DS 8.7 Serial number: DS 85 777 Type: Double screw extruder Year of manufacture: 1989 Operating hours: 24,048 h Screw diameter: 87 mm Connected load: 90 kW Gsdpfx Ajzuk Hbjk Usbt

Condition: excellent (used), Year of construction: 2011, complete window production line WEINIG CONTUREX C 124 with universal drilling head Gbedpfezg T Hhsx Ak Ust in very good condition year of manufacture: 2011

Condition: used, Year of construction: 2017, Maximum printing width: 1,650 mm Maximum web width: 1,700 mm Printing repeat: 430 – 880 mm Maximum mechanical speed: 600 m/min Suitable for solvent-based inks and coatings CFK Air Base mandrel printing cylinder system Stork CFK Air Base anilox sleeve system Gas drying system with Maxon burners Automatic viscosity control system Allstein / Inkspec Automatic ACLEAN ink cleaning system AVISCO viscosity control ARUN automation package Hydrostatic central impression cylinder bearings Unwind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shaftless * Material width: 850–1,700 mm (shaftless); minimum 450 mm with winding shaft * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Rewind * Splice direction: Top or bottom * Reel diameter: 250–1,000 mm * Core sizes: 3 in (76 mm) / 6 in (152 mm) * Design: Shafted * Material width: 450–1,700 mm * Web tension range: 25–300 N * Web tension control: Dancer roller * Reel handling: Lift table * Maximum mechanical speed: 600 m/min * Orientation: Face to face Suitable for printing on: • PET • BOPP Gbedpfx Aezp R Dpjk Ujt • OPA • LDPE • HDPE • PP films

Condition: used, Year of construction: 2024, Integrated SIAD Industrial Hydrogen Compression System (249 kW) - Manufacturer: SIAD Macchine Impianti (compressor), SAEP & FLOVEX (exchangers), Capelli & Cie (vessels). - Type: Turnkey reciprocating hydrogen compressor skid designed for ATEX Zone 2 hazardous areas. - Applications: Hydrogen gas (H2) boosting for chemical processing, mobility, and energy storage. Technical Specifications - SIAD HMS4-2 Compressor (2024): 249 kW | 384 kg/h | 0.1 to 3.5 bar(g) | ATEX Zone 2 - IIC - T3. - SAEP Gas Exchanger R-36050 (2024): 248 L volume | 10 bar(g) | -20 to +200 °C. - FLOVEX Oil Cooler (2024): BEM/OTT 403.4-13-2 | ASME VIII Div.1 | 10 bar(g). - Capelli Main Buffer Vessel (2024): 10,250 L | P265GH Carbon Steel | -1 to +0.5 bar(g) | 2,310 kg. - Capelli Condensate Tank (2024): 1,140 L | 316L Stainless Steel (X2CrNiMo17-12-2) | 730 kg. Working Principle & Highlights Low-pressure hydrogen (0.1 bar) is boosted to 3.5 bar(g) at 384 kg/h by the 249 kW SIAD unit. Thermal management is handled by FLOVEX and SAEP exchangers, while the 10,250 L Capelli tank absorbs system pressure surges. Gsdpfx Ajztw Upok Uebt - ATEX Compliant: Certified for hazardous Zone 2 gas group IIC environments. - Robust Metallurgy: Built with P265GH steel and 316L stainless steel for H2 service durability. - Modular Skid: Plug-and-play setup combining compression, cooling, and buffer storage.

Condition: as good as new (ex-display), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 18GG1012, Neopost DS 180i envelope inserting machine from a demonstration unit, practically NEW, hardly used, with only 17,245 envelopes processed on the counter!!! The machine has been fully inspected by a certified technician and is in absolutely new and flawless condition, without any defects. Includes a stacking belt! Gbedpfjwl Ihtsx Ak Ust Technical data: Max. volume (per month) 180,000 Throughput up to 4,500 envelopes/hour optional up to 5,500 envelopes/hour Gathering capacity (multiple extraction) up to 6,900 sheets/hour optional up to 9,400 sheets/hour Envelope formats C6 (optional), DinLang, C6/5, C5 Container capacity for adhesive fluid 10 liters Folding capacity up to 8 sheets (80 g/m2) 22" touchscreen monitor yes Job memory unlimited Automatic job setup yes System capacity documents/feeder up to 500 or 1,000 System capacity envelopes up to 800 Paper thickness documents min. 70 g/m2 - max. 120 g/m2 Max. insert thickness* 4 mm *depending on the feeder module used Folding types single, roll, zigzag, and double parallel folds, as well as no fold

Condition: good (used), Year of construction: 2004, For sale are 2 units of Scherer VDZ 80 DS with the following technical specifications: Swing diameter: 120 mm Z axis (vertical): 265 mm X axis (horizontal): 280 mm Front bearing diameter: 85 mm Rear bearing diameter: 75 mm 2 x A4 spindle Spindle drive rated power: 16.8 kW Rated torque: 100 Nm Speed range: 1000 - 7000 rpm Traverse speed Z axis: max. 30 m/min Traverse speed X axis: max. 30 m/min Dimensions: 2.44 x 2.3 x 1.42 m (L x H x W) Godpfx Akozvnh So Uobt Weight: 9000 kg Complete documentation available. Attention! The system will likely need some reprogramming as it was part of a complete production line. However, an individual program is available. On request, transport and loading can be organized throughout Europe for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us; our team looks forward to assisting you. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For more information or contact options, please reach us via the contact form.

Condition: good (used), functionality: fully functional, machine/vehicle number: J5500144, Year of construction: 2020, operating hours: 5,336 h, Stratasys J55 Prime professional full-color PolyJet 3D printer available due to upgrade to a larger production system. The machine was professionally maintained during operation and is suitable for design studios, prototyping labs, universities, and research environments requiring high-quality multi-material and full-color models. Specifications Total printing hours: approx. 5,336 h Printheads recently replaced (approx. 250 h use) Professionally serviced during operational period Machine idle approx. 1 year so technical inspection recommended prior to use Original system value > €120,000 Stratasys ProAero Air Extractor (PolyJet air filtration unit) included Stratasys Scale / Scanner included Standard cables and connections included Available service history documentation Gsdpfx Akoytg Rze Uobt Typical applications Industrial design & product development Architecture and design prototypes Medical and educational models Multi-material and full-color prototyping Additive manufacturing research Machine available for inspection by appointment. Collection location: Belgium. Please contact us for additional information, photos, or inspection arrangements.

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Gbsdpfx Akjzwgt No Uet Motor: 0,9 kW Voltage: 380 V Width: 600 mm Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Year of construction: 2018, condition: ready for operation (used), An automatic gKteso post-processing and deburring center is available. Technology: 6D, axes: 5+1, working dimensions X/Y/Z: 500mm/500mm/300mm, max. travel speed: 1m/s, repeatability: 0.05mm, path accuracy: 0.1mm, max. flatness: 0.02mm, chucks: 2-jaw/3-jaw/4-jaw chucks, machine dimensions X/Y/Z: approx. 2400mm/1800mm/2900mm, operating hours: approx. 12541h. Including pneumatic chucks, safety light curtain, exchange table and 6D technology. Documentation available. An on-site inspection is possible. Gbedpfx Aozlt N Tek Uot

Condition: used, Year of construction: 1983, machine/vehicle number: HL 2100 5083044, Working area: 3000 x 2250 mm (length x height) 3 vertical pressure bars Gbjdpfxjzl Ruge Ak Uet 2 horizontal pressure bars Electric height and width adjustment with automatic sensing Machine in good condition.

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Gbjdpfx Aey Rtlzok Uet

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 7.376.230.761, functionality: fully functional, operating hours: 2,216 h, pressing force: 400 t, stroke length: 365 mm, throat depth: 630 mm, controller model: Durma DT-15, working width: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Gsdpfxezzbafo Ak Ujbt Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: excellent (used), The machine is ready for operation; it was used for harvesting carrots. Its capacity is up to 25 tons per hour. Gsdpsytnhujfx Ak Uebt Please check out my other listings.

Condition: used, Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm Gbsdpfx Asw Ty Dnek Uot -Weight: 6860 kg

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Gedexizanjpfx Ak Uobt

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 5,000 h, total length: 1,750 mm, total height: 1,960 mm, total width: 1,240 mm, type of input current: three-phase, overall weight: 658 kg, input voltage: 208 V, input current: 30 A, feed length X-axis: 1,000 mm, feed length Y-axis: 610 mm, feed length Z-axis: 610 mm, space requirement length: 1,750 mm, space requirement height: 1,960 mm, space requirement width: 1,240 mm, STRATASYS F770 – A GREAT OPPORTUNITY: Large-format industrial 3D printer, including a 21 kW three-phase Riello UPS. Eligible for invoicing and 100% tax deduction at the end of the year! Selling for less than 1/3 of the list price due to company asset renewal. [1] WHY IS IT PERFECT FOR YOUR COMPANY? • Single-piece parts over 1 meter: Ideal for dashboards, ducts, housings, and large custom components without joints. [1, 2] • Ultra-resistant materials (ASA/ABS): Printing with ASA, an exceptional material resistant to UV rays, weathering, and mechanical wear, perfect for outdoor and industrial applications. [1, 2] Gbsdozyf Spjpfx Ak Uot • Jigs and workshop tools: Immediate in-house production of positioning jigs, mounting brackets, and drilling templates. [1, 2] • SR30 soluble support: Enables the creation of hollow geometries and complex shapes (e.g., conduits or cable ducts) without design constraints. [1, 2] TECHNICAL SPECIFICATIONS IN BRIEF: • Condition: 2023 | Only 5000 operating hours (as good as new). • Printing volume: 1000 x 610 x 610 mm. • Machine dimensions: 175 x 124 x 196 cm (L x W x H). • Weight: 658 kg on wheels. • Materials: ABS / ASA | SR30 soluble support. • Layer resolution: 0.33 mm | 0.25 mm | 0.178 mm. • Software included: GrabCAD Print / Insight (native CAD file management). • Details: Three-phase power supply | CE certification. [1, 2, 3, 4, 5] If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), The REX Düker Hydro 65 is a bowl cutter from REX Düker, a recognized manufacturer of machinery for the meat industry. The machine is designed for chopping and cutting meat raw material for the production of sausages, cold cuts, and other products requiring precisely prepared meat batter. Godpfx Akoztxx Nj Usbt How does the REX Düker Hydro 65 bowl cutter work? The Hydro 65 is equipped with a 65-liter bowl and a 6-knife cutting head, driven by a 20 kW main motor. Thanks to the hydrostatic transmission, blade shaft speed is infinitely variable up to 4500 rpm, allowing the intensity of cutting to be precisely matched to the type of raw material being processed. The bowl rotates at up to 500 rpm in both directions, and the machine offers 3 separately switchable bowl speeds. Operation is controlled via an SL23 membrane keypad with contactor control and motor protection, while smooth speed regulation is available through a potentiometer. A digital display shows blade shaft speed, bowl revolutions, and temperature in real time, and safety switches for the bowl and temperature ensure safe operation. Key advantages of the REX Düker Hydro 65 The REX Düker Hydro 65 stands out with infinitely variable blade speed thanks to its hydrostatic drive, allowing the cutting process to be precisely matched to different recipes and types of meat raw material. Three independently switchable bowl speeds, together with bidirectional bowl rotation, further increase the machine’s operational flexibility. A robust stainless steel construction, a control panel with a digital display of operating parameters, and a noise protection cover combine high functionality with comfortable, safe operation — an important factor for daily, intensive work in a meat processing plant. Technical specifications of the REX Düker Hydro 65 Manufacturer: REX Düker Machine type: Hydro 65 Bowl capacity: 65 l Cutting head: 6 knives Main motor power: 20 kW Blade shaft speed: infinitely variable up to 4500 rpm (hydrostatic transmission) Bowl speed: up to 500 rpm, bidirectional, 3 speeds Power supply: 400 V, 50 Hz Protection: 63 A slow-blow fuse Controls: SL23 membrane keypad, digital display Application of the REX Düker Hydro 65 bowl cutter The REX Düker Hydro 65 is used in meat and sausage processing plants, wherever precise chopping and mixing of meat raw material is required for the production of fillings, sausages, cold cuts, and other products with a uniform consistency. Infinitely variable blade and bowl speed make the machine well suited both to recipes requiring gentle cutting and to intensive chopping of raw material.

Year of construction: 2003, condition: good (used), functionality: fully functional, number of axes: 5, DS Technologie Scharmann ECOSPEED 2600/7800 5-axis high-performance machining center The machine was specifically designed for the highly dynamic machining of large-format aluminum structural components and operates with the parallel kinematic Sprint-Z3 machining head. The machine concept combines two conventional linear axes with the three-axis parallel kinematic head to enable simultaneous 5-axis machining. Manufacturer: DS Technologie Werkzeugmaschinenbau GmbH Product line: Scharmann Machine type: ECOSPEED 2600/7800 Year of manufacture: 2003 Axes: 5 Machining head: Sprint Z3 Machining head kinematics: Parallel kinematics Motor spindle: 75 kW Spindle torque: 72 Nm Gbjdpfx Akezwhunj Ust Maximum spindle speed: 24,000 rpm Tool holder: HSK-A63 Maximum tool weight: 10 kg Maximum bending moment of tool: 350 Nm Tool balancing quality: G 6.3 Tool clamping: Hydraulic Hydraulic pressure for tool clamping: 120 bar Volume flow for tool clamping: 6.6 l/min Power of hydraulic unit for tool clamping: 1.5 kW Typical application: Structural components for the aerospace industry Mains connection: 3 AC 400 V Mains frequency: 50 Hz Nominal current main machine: 500 A Control system: Siemens SINUMERIK 840 D Tool magazine: Automatic tool magazine Tool change: Automatic Workpiece handling: Integrated large-format workpiece and transport system Machine design: Fully enclosed large machine Chip removal: Integrated Hydraulic unit: Knoll Hydraulik Systeme Operation: Stationary Siemens control panel with additional handheld device The Sprint-Z3 head has three parallel linear drives and enables translational and two rotational movements via the coupled movement of the parallel mechanism. Together with the two linear axes of the machine, the 5-axis kinematics of the ECOSPEED are created. We will be happy to provide further information, videos or drawings upon request.

Condition: used, Rex Hydro Cutter 65 is a professional bowl cutter designed for meat processing and the production of emulsions, sausages, pâtés, and other food products. Equipped with a 65-liter bowl and a six-knife cutting system, it delivers fast, precise, and consistent chopping and mixing performance. The machine is manufactured from high-quality stainless steel, ensuring durability, easy cleaning, and excellent hygiene standards. It features two knife speeds and two bowl speeds, allowing operators to adapt the process to different products and production requirements. A stainless steel cover and additional noise-reducing protection contribute to safe and comfortable operation. Powered by an 18 kW motor, the Rex Hydro Cutter 65 provides reliable performance and high productivity for small and medium-sized meat processing facilities. Technical Specifications Manufacturer: Rex Model: Hydro Cutter 65 Bowl Capacity: 65 L Number of Knives: 6 Knife Speeds: 2 Bowl Speeds: 2 Motor Power: 18 kW Power Supply: 400 V / 50 Hz Dimensions: 1350 × 900 × 1300 mm Gbsdpfx Aozgn Tvok Ust Construction: Stainless Steel

Condition: used, first registration: 02/1990, Year of construction: 1990, SPIERINGS Lattice Mast Tower/Truck Crane Chassis: • Engine power: 222 kW / 305 HP / displacement 8,250 cm³ • Vehicle dimensions: 12,395 x 2,600 x 4,000 mm • Operating weight: 35,000 kg • Permissible gross weight: 36,000 kg incl. 7,080 kg counterweight • Tires: 445/65 R22.5 • 3 axles • 1st and 3rd axles are steered • Beacon lights Crane: • Max. outreach: 30.4 m • Max. lifting capacity: 5,000 kg at 9.3 m outreach • Drive system: hydraulic, hydro pumps electrically powered by external power source or generator operation • Control system: electrically operated proportional and control valves • Max. corner load: 204 kN • Max. speed: 85 km/h • Can only be moved from the carrier vehicle! Hoisting Gear: • Motor: hydraulic variable displacement motor • Drive group: 1Am • Displacement: 20..55 cm³ • Max. supply pressure: 260 bar • Transmission: planetary gear, i=27 • Drum diameter: 375 mm • Max. rope pull: 25 kN • Corresponding rope speed: 30 m/min • Holding brake: spring-loaded multi-disc brake Trolley: • Motor: hydraulic fixed displacement motor • Drive group: 1Am • Displacement: 16 cm³ • Max. supply pressure: 265 bar • Transmission: planetary gear, i=10.4 • Drum diameter: 200 mm • Max. rope pull: 6 kN • Max. speed: 50 m/min • With limit switch • Holding brake: spring-loaded multi-disc brake Slew Gear: • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 300 bar • Transmission: planetary gear, i=160 • Max. superstructure slewing speed: 1.3 rpm • Slewing brake: hydraulic brake valve • Holding brake: spring-loaded multi-disc brake Luffing Winch: • Drive group: 1Em • Motor: hydraulic fixed displacement motor • Displacement: 16 cm³ • Max. supply pressure: 220 bar • Transmission: planetary gear, i=92 Godpewmpczofx Ak Usbt • Drum diameter: 200 mm • Max. rope pull: 38 kN • Max. speed: 18 m/min • Holding brake: spring-loaded multi-disc brake • With limit switch Load / Load Moment Limiter: • Pressure switch on hoisting drive motor • Mechanical switch triggered by turret frame bending Tower: • Working height: 20.8 m • Outer tower: length 9.9 m; Inner tower: 11 m Jib: • Trolley jib in lattice construction; can be positioned either horizontally or at 30° incline • 1st jib section: length 11 m / 2nd section: 11.1 m / 3rd section: 7.8 m - German machine! - Ready for operation! Errors and prior sale excepted! = Further information = Main boom length: 30.4 m

Condition: used, Year of construction: 2021, operating hours: 1,930 h, functionality: fully functional, PANIZZOLO PZH1500R – Twin-shaft pre-shredder / Rotary shear – Metal shredder – 264 kW – 1,930 hours Manufacturer: Panizzolo Recycling Systems Model: PZH1500R / PZ H 1500 R Machine type: Twin-shaft shredder / Rotary shear / Pre-shredder Year: __2021__ Hours: 1,930 h Condition: Used Gedpfxsx I Dc Eo Ak Usbt Technical specifications Cutting chamber: 1,500 × 1,400 mm Installed power: 264 kW (2 × 132 kW) Shaft speed: approx. 6–12 rpm Blades: Bolted (knives / cutters) Transmission: Heavy-duty industrial gearboxes Control: PLC / industrial automation Weight: approx. 27,500 kg Applications / materials Light scrap metal Steel sheets Drums / cans Metal tanks Aluminum profiles Ideal for metal recycling, waste treatment center, shredding line, scrap metal recycling. Condition Machine is functional Blades need to be replaced Maintenance records available Inspection and testing possible on site Terms of sale & price 🔧 Sold as is (work required) – Thread repair and blade holder surfacing, complete blade set replacement Availability: Immediate Price: €250,000 (excluding VAT)

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Gbodpoytx Skjfx Ak Uet Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!