Used Celaschi Celaschi Complete 4-Side Profiling Line for sale (79,720)

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Iiodpfszzd Dmox Ahyoh Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: excellent (used), Profiling line consisting of: Pre-cutting group H 44, FZ 1, FZ 3, FR 16 with 2 side guides Re-cutting group TKV, H 42, FZ 3, FR 15 - 2 side guides, FR 12 re-cutting machine, cutting height 280 mm, fixed installation Low-grade wood line Media, 28 cm Wood lengths 2.5 to 4.0 m (can be converted to 5 m lengths) Iiodpfx Ahoz Ehadeyeh

Condition: used, Year of construction: 2012, Assembly of : 3x 4 head welding Soenen Q4 machines on 1 chassis 2 head automatic cleaning machine Soenen BFP Duplex Iiedpjz A D E Dsfx Ahyoh Robot Soenen MOS for automatic hinges automatic transfer table

Condition: used, functionality: fully functional, COMPLETE POLAR 137 ED AUTOTRIM CUTTING LINE CONSISTING OF: POLAR 137 ED AT GUILLOTINE with Autotrim device for automatic waste trim removal, useful cutting width 137 cm, complete with side connecting stainless steel air tables, press before the blade, swiveling and tiltable saddle POLAR RA 6 JOGGER with air removal roller, Year 2000 POLAR TR 130/4 AUTOMATIC DELIVERY Possibility to configure the delivery and jogger on the right or left Iiedoy R R Rhjpfx Ahysh The line is installed and available for testing at our showroom

Condition: ready for operation (used), COMPLETE KRONES PET BOTTLES ASEPTIC FILLING LINE FOR FRUIT JUICE/BEVERAGES AND SPRITZERS. SUITABLE FOR STILL AND CARBONATED PRODUCTS. YOM 2002-2007 CAPACITY: 0,5L x 36.000 BPH 1,0L x 30.240 BPH 1,5L x 25.200 BPH BOTTLE CLOSURES 28mm. THE LINE INCLUDES BOTTLE BLOWING, FILLING, LABELING, PACKAGING AND PALLETIZING: 1. Control unit: Ruland 2002, touchscreen, flash heating & CIP/SIP 2. Pasteur: Ruland 2002, tube heat exchanger, 1315 L supply tank, max. 21,800 L/h 3. Sterile tank: Roth 2002, 11,000 L 4. Carbonization: Roth/Ruland 2002, 2575 L, disconnected 5. Nitrogen system: Terboven/ISTE 2002 6. Hygienic center: Ecolab/Lang 2002, CAF, no PLC 7. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 8. Sterile water system: Roth/Ruland 2002, 9,000 L/h, buffer 2575 L 9. CIP/SIP: Ruland 2002, 20,000 L/h, 1315 L supply tank 10. Cleanroom: Weiss 2002, ventilation/overpressure 11. Preform hopper: Dieterle 2002, MD3 12. Preform feeding: Tanner 2002, HFT 4730 / RGT 1624 13. Blow molding: Krones Contiform S16 2002, 16 stations, 1.0–20,000 b/h 14. Air conveyor: Krones 2002, automatic rail adjustment 15. Cap conveyor: Gassner 2002, 2 container positions, cap elevator 16–18. Filling machine: Krones CAF VODM 100 2002, injector (60), rinser (80), filler (100), capper (20), 1,0–20.000 b/h, 28 mm caps, still/carbonated 19. Label check: Krones 2002, incl. in Prontomodul 20. Bottle check: Krones 2002 21. Conveyor: Krones 2002, air blower before labeling 22. Labeling machine: Krones Prontomodul 2007, max. 35.600 b/h 23. Canmatic module: Krones 2007, paper labels 24. Contriroll module: Krones 2007, film roll 25. MHD coding: Videojet Excel/170i 26. Shrink wrapper: Krones Variopak 2002, 0.5–36,000 b/h, carton feeder & film transport 27. Packaging conveyor: Krones 2002 28. Handle applicator: Twinpack MHTE 2002 29. Empty pallet magazine: Krones LPM 2002 Iodpfx Aoxm Rwqehyeih 30. Palletizing: Krones robot 3A loader 2002, 4,000 packages/h 31. Pallet conveyor: Krones 2002, transfer cart & turner 32. Empty pallet magazine: Krones LPM 2002 33/34. Pallet stretch wrappers: Franpak 2002, top sheet applicator 35. Tying machine: Bornbinder HB 2002 36. Pallet coding: Logopak EAN 128 2003 THE LINE IS STILL NOT DISMANTLING, EXCELLENT CONDITION. LOCATION - GERMANY.

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete Abrasive Belt Production Line for Sale – Excellent Condition (2024) Complete Abrasive Belt Manufacturing Line – Ready for Production We are offering for sale a complete abrasive belt production line, purchased new in April 2024 from iSharp China. The equipment is in excellent working condition, has been professionally maintained, and is available immediately. Equipment included: 1. Cutting to Length Machine – CTB-L/W-1800      Quantity: 1 Maximum cutting width: 1800 mm Cutting angle: ±55° / 90° Pneumatic pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 2. Skiving Machine – SKV-C-N      Quantity: 1 Skiving speed: 30–200 mm/s Pneumatic pressure: 0.7 MPa Installed power: 7 kW Iisdpozrzk Ejfx Ahysh Application: abrasive belt joint preparation / skiving 3. Abrasive Belt Press – PRS-480       Quantity: 1 Rated pressure: 15 tons Maximum width: 400 mm Press board temperature: 20–60°C Press holding time: 0–999 sec Power supply: 220V / 1PH / 50Hz 4. Rolling Abrasive Belt Press – PRS-R-1900        Quantity: 1 Pressing width: 1900 mm Pressing mode: Rolling Pressure: 350 kgf Press board temperature: 20–60°C Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 5. Jumbo Roll Slitting Machine – SLT-R-1650N Quantity: 1        Slitting width: 50–1650 mm Slitting speed: 2–10 m/min Blade pressure: 6–60 kgf Slitting accuracy: ±0.5 mm Working pressure: 0.7 MPa Installed power: 3 kW Power supply: 380V / 3PH / 50Hz 6. Narrow Belt Slitting Machine – SLT-B-300   Quantity: 1 Application: narrow abrasive belt slitting 7. Belt Slitting Machine – SLT-B-650        Quantity: 1 Belt width: 10–650 mm Belt length: 530–4000 mm Blade pressure: max. 500 kgf Belt tension: max. 160 kgf Air pressure: 0.7 MPa Power supply: 380V / 3PH / 50Hz 8. Wide Belt Slitting Machine – SLT-B-1600 Quantity: 1 Maximum slitting width: 1600 mm Belt length: 1400–3200 mm Air pressure: 0.7 MPa 9. Abrasive Disc Punching Machine – PUN-40T1500    Quantity: 1 Stroke: 5–150 mm Power supply: 380V / 3PH / 50Hz 10. Portable Forklift – ELS500-1000KG   Quantity: 1 Application: material handling / lifting equipment 11. Moulds / Cutting Dies   Quantity: 44 pieces Various moulds / cutting dies for abrasive disc production Advantages: Complete production line Excellent mechanical and cosmetic condition Low operating hours Ready for immediate production Ideal for companies looking to expand production capacity or start abrasive belt manufacturing The original purchase value of the machinery exceeded USD 100,000 (excluding shipping and import costs). Location: Oradea, Romania The machines can be inspected under power by appointment.

Condition: used, Complete PET bottling line for still and carbonated water, with a capacity of 14,400 bottles per hour for 0.5 L bottles. Technical Data Capacity: 14,400 bottles/hour for 0.5 L bottles Products: Still and carbonated water Containers: PET bottles Bottle formats: 0.33 L, 0.5 L, 1.0 L, 1.5 L and 2.0 L; currently running 0.5 L bottles Labelling: PE Roll-Line Cap feeding system: Gravity 26 Pack formats: * Packs of 12 for 0.5 L and 1.0 L bottles * Packs of 24 for 0.5 L bottles * Packs of 6 for 1.5 L bottles Pallet formats: Euro pallets measuring 800 × 1,200 mm and Düsseldorf pallets measuring 800 × 600 mm Iiodpfez Ri N Eex Ahyoh Condition: Used line Video: Machines and Equipment 1. PET blow moulding machine – Sidel SBO 8, year 2006 Including preform tipper, preform hopper, elevator, orienter and feed chute 2. Air conveyor – Lanfranchi, year 2006 3. Chiller – MTA, year 2026 4. Filling machine – SACMI Blu Star 28/40/10, year 1997 5. Capping machine – Arol, year 2011 6. Cap and fill-level inspection system – KBB, year 2023 7. Carbonator – SACMI, year 1997 8. Bottle conveyor – Sipac, year 2012 9. Labelling machine – PE Roll-Line, year 2020 10. Shrink wrapper – SMI LSK 45, year 2001 11. Pack conveyor – ACMI, year 2000 12. Handle applicator – COMAG H50, year 1998 13. Palletiser – KHS, year 2002 14. Pallet wrapper – Tosa, year 1994 Technical documentation is available. Price on request.

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Isdpfxetqu U To Ahyeih Extrusion machine Trimming machine

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Iodezytmzepfx Ahyjih Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. Isdpfezmd Uijx Ahyjih The complete line is offered for sale as one unit.

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Ijdpfx Ajxa Excjhyeih

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Complete polishing line for slabs still active and fully functional, viewable and equipped with: - automatic loading unit Isdpexdnbbofx Ahysih - motorized roller conveyors for automatic slab feeding - combined calibrating/polishing machine with high removal rate polishing spindles equipped with mechatronics for material calibration - equipment for drying by means of ventilation on both surfaces of the slabs - automatic waxing machine - automatic protective film applicator

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 970356, 970357, type of input current: three-phase, input voltage: 400 V, compressed air connection: 6 bar, input current: 40 A, air pressure: 6 bar, We offer this used Arodo Total Bag-Handling bagging machine, manufactured in 1997. The bagging line includes: - a hopper with a feeder for the material to be packaged - a bagging line (volumetric filling) with printing on individual bags - a line for stacking and gluing bags onto a pallet It was imported to Poland from Belgium in 2016. The palletizer's capacity is up to 1300 bags/hour (the bagging section's capacity is approximately 600 bags/hour). The bags have maximum dimensions of 550 mm width and 950 mm length. The maximum bag weight is 50 kg. The palletizer is automatic and stacks 5 bags per layer. It is designed to work with material with a particle size of 0–40 mm. The line has been in operation for 17 years. Serial numbers: 970356, 970357 Year of manufacture: 1997 Number of phases: 3 phases Voltage: 400 V Iisdpfx Ajzph Aiohyeh Frequency: 50 Hz Supply current: 40 A Rated current: 38.8 A Air pressure: 6-9 bar Maximum pallet weight: 1750 kg Maximum bag weight: 50 kg A complete operating manual with technical documentation is available in French and Polish (translation provided). The line can be started up. The price includes training on how to use the line after purchase. If you have any questions or need additional information, please contact us.

Condition: ready for operation (used), Year of construction: 1995, operating hours: 39,000 h, functionality: fully functional, Equipment: documentation/manual, A used and functional profile line for rigid PVC-profiles (300 x 100 mm), consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Type: DS 7.22 Year of manufacture: 1995 Machine no.: DS70-043 Operating hours: 39,000 hours Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, continuously adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Cylinder heating/cooling zones: 5/3 (air cooling with fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional control with digital temperature controllers Degassing: Busch rotary vane vacuum pump (1.5 kW) Output capacity, max.: 120-150 kg/h for hard PVC, depending on material Connected load: approx. 50 kW (without tool) Special accessories: Mass temperature sensor and mass pressure sensor Adapter between extruder connection and extrusion tool Used tool set for a window profile (widening), consisting of: - Extrusion tool ‘widening’, incl. heating bands - Dry calibration - Vacuum tank approx. 2 m long, with 8 slots for calibration discs - 16 calibration discs Vacuum calibration unit Manufacturer: Uniplast / Greiner Type: CAL VAK 4P Year of manufacture: 1992 Machine number: K9209590 Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (4.3 kW each) Water circulation pumps: 2 x Calpeda (1.1 kW each) Caterpillar haul-off, incl. attached saw Manufacturer: Uniplast / Greiner Type: CAT PUL 2D Year of manufacture: 1992 Machine number: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Haul-off force, max.: approx. 25000 N Speed range: approx. max. 10 m/min. Profile saw: HM circular saw blade: Ø 450 mm Isdpfx Ahjyhcabsyeih Profile cross-section, max.: approx. 300 x 100 mm Tilting table Manufacturer: Ide Type: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The complet profile line was overhauled in 2020 and has only been in operation for 325 hours since then.

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Iiodpfjyz Si Hox Ahyoh Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Condition: excellent (used), Year of construction: 2021, 4-SIDE EDGE BANDING LINE Iiodpfx Ahjx Aqbhoysh Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: O12044a) Infeed table "HOMAG" Mod. TBL 100/25/12 with motorized rollers O12044b) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. EDGETEQ D-610 (KFL 525/5/A3/15) O12044c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) O12044d) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator Iisdeymbfyepfx Ahyeh 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler Iijdpfxozuzfbj Ahysh - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 Iijdpedt Rgvofx Ahysh VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12

Condition: refurbished (used), functionality: fully functional, /// MONOBLOC COLUMN MODEL 1300/ SHF - Cast iron structure with stabilization treatment. - Cast iron flywheels, ellipsoidal shape, flywheel diameter 1300 mm. - Flywheel width of 165 mm for maximum blade width of 180 mm. - Flywheels with solid discs with special ribs to enhance mechanical characteristics, subjected to stabilization treatment; modeled with a double curvature for the best stability on the table; perpendicular to the axis of rotation. - Tilting the upper flywheel to adjust the blade thrust. - Hydraulic blade tensioning with tension indicators. - Main motor 55 kW (75 HP), automatic star-delta start, pulleys, belts and brake - For 180 mm wide canvas ///Carts hydraulic PRIMULTINI with 4 MORSE - 4 hydraulic morses Ijdpfezmfrcex Ahysih - Max. clamp blade distance 1000 mm - Maximum needle opening 900 mm - Simultaneous hydraulic clamps - Fast and precise movement of clamps - Electronic module 2026 for control MOVEMENT clips - return arms - Hydrostatic advance - Automatic centralized lubrication with pump - Double control unit with seat - Cables ELECTRICAL and electrical panel - Flat and profiled rails for a maximum cutting length of 6 m MANUFACTURER PRIMULTINI ITALY - REFURBISHED LIKE NEW 2026 OPTIONAL: -Log ramp, length 4 m..... 20,000 eur excluding VAT -Log loading arms on the log saw trolley hydraulically operated with a single cylinder..... 20,000 eur without VAT - Conveyors with ROLLER for unloading - length Approx. 7m , width 1m ..... 20,000 eur excluding VAT SECOND UNLOADING ROLLER -length 6.3 m approx. ..... 20,000 eur without VAT

Condition: used, Year of construction: 2010, operating hours: 100,000 h, functionality: fully functional, workpiece weight (max.): 50 kg, working width: 1,400 mm, suction capacity: 50,000 m³/h, type of input current: three-phase, total height: 2,800 mm, total length: 65,000 mm, total width: 2,700 mm, power: 365 kW (496.26 HP), input frequency: 50 Hz, input current: 930 A, operating pressure: 6 bar, workpiece width (max.): 1,250 mm, complete lacquering line: 2x Costa K7 sanders (2010, 1st- 2x roller / 2x pads, 2nd- 2x brushing, 1x pad ) Iiodpfx Aev Tbgyehyoh 1x Heesemann sander (LSM8 2006.12.161) 2x Wikoma hot air drying tunnel (2002) 4x UV lamps dryer ( 2lamps, UV 2000 M2+CRIM+TN 3500/HT / 2lamps UV 2000 M2+CRIM+TN 3500/HT / 1lamp UV 2000 M1+CRIM+TN 3000/HT / 3lamps UV 2000 M3+CRIM+TN 4000/HT) 2x stain roller coaters ( Smartcoater M) 2x heavy putty roller coaters (Smartcoater SP1) 3x lacuer roller coaters (Smartcoater MF) 8x belt/roller conveyors 2x hydraulic lifters (200-900mm height)

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, Equipment: cabin, documentation/manual, Log sawing line: Iiedpfx Ajzwf Ncehysh 1) WRAVOR band saw, model WRC-1250 2) Circular saw for edging and trimming with 3 movable blades and one fixed blade with PLC, model WRAVOR 20/120 3X 3) Wravor conveyors for removing lumber from the band saw, transferring to the edging machine, feeding into the edging machine, and a conveyor with left-right discharge at the outlet of the edging machine, plus a log feeding ramp for the band saw. The equipment can also be sold separately (either just the band saw or the edging machine). For sale: complete WRAVOR log sawing line, model WRC-1250 Wravor Sawmill Machinery, manufactured in 2019: 1) Wravor band saw WRC 1250 2) Circular saw for edging and trimming with 3 adjustable blades and one fixed blade, model WRAVOR 20/120 3X 3) Conveyors (log loading ramp, lumber discharge conveyor from the band saw, transfer to the edging machine, infeed conveyors for the edging machine, conveyor with left-right discharge at the outlet of the edging machine) Price for the entire line: 145,000 euros + VAT. The equipment can also be sold separately; for more details, please call:

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: O06027A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 250/D/25/12 O06027B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525 / 6 / A3/ 15 O06027C) L shaped connecting roller conveyor "HOMAG" Mod. TWL 310 / 25 / 12 O06027D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526 / 9 / A3 / 25 O06027E) Connecting Roller Conveyor "HOMAG" Mod. TBL 100 / 25 / 25 O06027F) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 30 / 02 S O06027G) Connection transfer (on rails) "HOMAG" Mod. TWL 120 / 34 / 02 S O06027H) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12 Ijdpswxvdcefx Ahyeih

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S Isdpfx Ahotr Enveyeih

Condition: good (used), mileage: 120,273 km, power: 120 kW (163.15 HP), first registration: 09/2020, fuel type: diesel, tire size: 225/65R16, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 7,100 mm, total width: 2,220 mm, total height: 3,350 mm, loading space length: 4,260 mm, loading space width: 2,130 mm, loading space height: 2,240 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, tail-lift, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Tail lift - Manual - Radio/cassette - Reversing camera - Fabric = Notes = Configuration: 4x2, Tare weight: 2759 kg, Gross vehicle weight: 3500 kg, Type of cabin: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assistance: None, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Bluetooth, Engine power: 120 kW (161 Hp), Engine displacement: 2299 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Gearbox type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Side wall paneling, Roof rack: None, Side doors: 1, Rear closure: Tail lift, Central locking, Number of seats: 3, Seat arrangement: 1+2, Seat cover: Fabric, Seat adjustment: Manual, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 750 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 218x180, Box van with tail lift, side door, air conditioning, Euro 6, panel van, navigation, camera!, Spare wheel, Tire type: Summer tires Iisdsz Awawspfx Ahyjh = Additional Information = General information Number of doors: 1 License plate: KLEYN1 Axle configuration Tire size: 225/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 3 mm; Suspension: Coil spring Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 5 mm; Suspension: Leaf spring Weights Unladen weight: 2,759 kg Payload: 741 kg GVW: 3,500 kg Functional Tail lift: Dhollandia, Rear door, 750 kg Height of loading platform: 90 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €442 per month (delivery van, 72 months); Ask for more information and conditions.