Used Carbide Saw Brazer for sale (5,938)

Condition: like new (used), Hollow face carbide saw grinder VOLLMER model MHZ Prodpfohcw N Eex Adlsc

Condition: excellent (used), Carbide saw grinder VOLLMER model CHD250R2 with 3 stations loader VOLLMER model ND230 Pedpfsipqztex Adlorc

Condition: new, Year of construction: 2025, Schnittbereich rund: 20 - 100 mm Cutting area, square (W x H): 20 x 70 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 65 mm Shortest remaining piece length in single cut: 30 mm Length: 2300 mm Width including chip conveyor: 2260 mm Height: 22100 mm Height of material support: 925 mm Weight of machine approx.: 3950 kg Electrical connected load: 26 kW Saw motor power: 18,5 kW Hydraulic motor power: 2,2 kW Cutting speed continuously adjustable: 30-160 rpm Prodewaa Dvspfx Adloc Feed speed of the saw: 0,3-30 mm / sec Automatic material feed length, single stroke: 800 mm Length of automatic material feed, multiple strokes: 9999 mm Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2,25 mm

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Prsdpfx Aoyh Hc Rodlsc

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Predpfx Ads Afznuolec Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 Psdpfx Adjwxmhleljrc 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Predpfsxlcausx Adljc Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: used, Year of construction: 2026, Avola construction site circular saw ZBV 500-S. Complete with operating manual, adjustable cutting height, and bevel adjustment 90°-45°. Electrical connection for three-phase current 400 V, 50 Hz. Device plug CEE 32, with phase inverter. Circular saw blade, carbide-tipped, sound-dampened, 500 mm diameter. With safety guard and table extension. Parallel fence with 2 support edges. 4 lifting eyes. Cutting height 0-170 mm, weight 175 kg. Motor power P1/P2: 6.4/5.0 kW. Therefore, ready for use in all respects. Podpfx Ads Af Nnlelorc Storage location: Available for delivery.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The machine is currently undergoing refurbishment; updated photos will be provided. Cutting length: 5000 mm with 2 saw blades operating simultaneously (for extra-long cuts up to 10 meters). Windows 10 PC New saw motors Pneumatics largely new or refurbished With uninterruptible power supply Additional tensioner on the roller conveyor Swiveling material support Automatically positionable via a DC motor, movable saw unit on hardened linear guide rails Travel speed approx. 20 m/min. Minimum section length 335 mm (5 mm) Maximum cutting length 5350 mm (9000 mm) Saw blade drive: 2 x 3 kW, 400 V, saw blade speed 2650 rpm Automatic electronic miter adjustment as standard up to 22.5° outwards and 45° inwards via servo motors Psdpfo Afbrgex Adlerc External and internal dimension cutting Robust construction and proven workmanship guarantee the highest dimensional accuracy. Extremely stable welded construction with chip collection drawers in the machine bed Particularly large cutting area due to 550 mm saw blades Hydropneumatic saw blade feed Clamping devices, horizontally pneumatic, 1 each on the left and right of the saw blade Roller conveyor, 1.5 m long, with additional material support at the end of the frame LUBETOOL timed spray device Pneumatic saw blade guard Operation via two-hand control according to BG regulations Suction nozzle for connecting a chip extraction system Includes 2 carbide circular saw blades, 550 mm Optionally also available with an integrated extraction system!

Condition: used, Vesto saw with two discs for sale Pedpfx Astqt T Iodlerc - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Pedpfx Aswuqbbsdlerc Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: used, Year of construction: 2020, Technical details: cutting diameter: 27 mm saw band length: 2910 mm saw band width: 0,9 mm span width: 320 mm dimensions of saw-band: 2910 x 27 x 0,9 mm band speed: 20 - 120 m/min electrical connection: 400/50/60 V / Hz. total power requirement: 1,5 kW machine weight approx.: 390 kg dimension machine approx.LxWxH: 1480 x 1700 x 2000 m Fully hydraulic lowering and lifting function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off after completion of cut, return of the saw arm to starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short-stroke cylinder for vise Precisely ground carbide saw blade guides, adjustable Electric coolant pump Manual band tension with display, including electrical monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Chip removal brush, running synchronously Large, solid round support table, rotates during miter cuts with predefined cutting channel; miter adjustment manual, readable via scale Material stop 500 mm with scale Incl. saw blade with combi toothing 4/6 Prjdpfjy E Hynsx Adljc Roller conveyor sections: 2 pieces of 3 m and 1 piece of 2.55 m. *

Condition: good (used), Year of construction: 2003, Horizontal bandsaw fully automatic with gripper feed Cutting capacity 90° Podpfxeynaz Nj Adlerc round: 400 mm square: 400 x 400 mm Cutting speed: 15 - 90 m/min Working height: 800 mm Saw blade dimensions: 4570 x 41 x 1.3 mm Material feed per stroke: 560 mm Multiple feed: up to 9 times = 5040 mm Motor power: 5.5 kW Dimensions (L x W x H): 2250 x 2850 x 1700 mm Weight: 2500 kg Accessories / Special features: • Fully hydraulic: workpiece clamping, saw feed, bow lifting, and material feed • Gripper feed system • Screw conveyor swarf remover • Fully automatic operation or single cuts • Automatic bow lifting height adjustment according to material diameter • Max. cut length: 560 mm with single feed • 5040 mm with multiple feed • Hydraulic clamping pressure regulation for the vise • Saw band guidance via deflection rollers and carbide jaws • Constant saw band tension with automatic shutdown in case of blade breakage • Coolant system • Piece counter • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. Pedpfx Aju Nigwjdlorc *

Condition: repair required (used), MZ Project LC 5000 – longitudinal cutting saw Cutting length: 2000 mm Machine intended for spare parts. Pedpfs Af Uu Rex Adlorc

Condition: used, Year of construction: 1970, saw blade diameter 300 mm turning speeds 17,5/35 U/min Predj Agcllspfx Adlec

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 15-11-12-098, functionality: fully functional, power: 5.5 kW (7.48 HP), saw blade diameter: 500 mm, Excellent condition Machine available from January 2027 - Equipment package "B" - Saw blade, D = 500 mm - Motor power 5.5 kW (7.5 hp) Vario - 2-axis scoring unit - Double roller carriage, L = 3200 mm - On/off switch on the double roller carriage - Miter stop on the cross table up to 3200 mm with Digit-L Podpfs Af Ub Ujx Adljrc - CNC parallel stop, 1300 mm - Control panel at eye level - Template holder - Table extension, 840 mm

Condition: used, Year of construction: 2022, machine/vehicle number: 220.01.034.22, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, total length: 4,650 mm, total width: 850 mm, total height: 1,500 mm, overall weight: 900 kg, Details Format4 tempora F600 60.06L Edge bander for interior construction Year of manufacture: April 2022 Serial number: 220.01.034.22 15” smartouch screen x-motion plus package Extended infeed fence Equipped with advantEdge gluing unit Chain feed: 10 m/min Jointing cutter: 2x 3 kW Infrared heating Guillotine shear for cutting from coil: 0.4 – 3.0 mm Buffing unit top/bottom End trimming unit: 2x 0.75 kW Multifunction unit top/bottom Corner rounding unit: 2-motor Radius scraper x-motion plus Flat scraper Electrical Data Voltage: 400.0 Phases: 3 Frequency: 50 Amperage: 28.0 Power: 15.0 Minimum pressure: 7 bar Markings: CE, UKCA Made in Austria Dimensions and Weight Length: 465 cm Width: 85 cm Height: 150 cm (detailed dimensions in the photos) Weight: approx. 900 kg Other Predpfx Ade Afw Tgeloc Condition: used The machine has already been disassembled and is ready for transport. The first photo is a stock photo.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 232597, functionality: fully functional, cutting height (max.): 320 mm, overall weight: 2,100 kg, controller model: Siemens Simatic HMI, throat depth: 370 mm, No minimum price – guaranteed sale to the highest bidder! Predpfx Asz Ilvzedljc Submitting a bid obligates you to collect the item within the period from November 16, 2026, to November 26, 2026! TECHNICAL DETAILS Belt length: 5,080 mm Belt speed: 250–2,000 m/min Maximum cutting height: 320 mm Overhang: 370 mm Guide rod, hydraulic lift: 200 mm Belt tension, hydraulic lift: 60 mm Material support height: 1,200 mm Roller diameter: 630 mm MACHINE DETAILS Control: Siemens Simatic HMI Operating voltage: 400 V Rated current: 32 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,500 x 2,700 mm Weight: 2,100 kg EQUIPMENT Roller conveyor (roller conveyor width: 350 mm) External reference: Heraeus

Condition: used, Year of construction: 2020, machine/vehicle number: 30.04.004.20, functionality: fully functional, power: 14 kW (19.03 HP), Format4 kappa automatic 80, industrial panel sizing saw for cutting/sizing wood panel materials Details Format4 kappa automatic 80 Panel sizing saw for cutting/sizing wood panel materials Year of manufacture: April 2020 Serial number: 30.04.004.20 Cutting length: 3,200 mm Cutting depth: 3,200 mm Cutting height: 80 mm (package clamp opening: 75 mm) Saw blade: 320 mm Scoring saw blade: 150 mm with 1.1 kW motor 8 package clamps 24-inch touchscreen Label printer Electric cutting height adjustment Clean-cut device Side pressure device: 20–1,200 mm 3 air cushion tables: 2,300 x 600 mm Electrical Data V: 400 PH: 3 HZ: 50 A: 36 kW: 14.0 Dimensions and Weight Length: 660 cm Width: 540 cm Height: approx. 160 cm (detailed dimensions shown in the photos) Pjdpj Afw H Hefx Adljrc Weight: approx. 4,400 kg Other Various saw blades included Condition: Used Pallets included The machine has already been disassembled and is ready for transport. The first photo is a stock photo.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Mössner REKORD SSF630 – heavy-duty 11 kW version with manual transmission Top-maintained industrial band saw including extensive equipment Mössner REKORD SSF630 in the heavy-duty 11 kW version, equipped with a 2-speed manual transmission. The machine comes from an industrial environment, is fully functional and ready for immediate use. Equipment & Features: Prodpfx Ao Afuqpodljc 11 kW drive – heavy-duty version Manual transmission Cutting speeds: 27–142 m/min and 410–2200 m/min Roller guide completely including guide rollers Feed table with 4 T-slots Mushroom-head emergency stop button LED work light Extra protective cabin (ideal for series or precision cuts; can be removed for long workpieces) Machine mounted on a steel plate – immediately stable Spare saw blades included Main technical data: Saw band length: 5180 mm Maximum cutting height: 460 mm Maximum cutting width: 605 mm Table size: 740 × 785 mm Table load capacity: 250 kg Operating voltage: 400 V Loading onto a truck is free of charge.

Condition: like new (used), machine/vehicle number: INDUSTRY 9, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 630 mm, saw blade diameter: 120 mm, total length: 1,240 mm, total width: 1,170 mm, total height: 1,280 mm, overall weight: 850 kg, Equipment: CE marking, Przemysłowa grubościówka ROJEK RFT 630 z serii INDUSTRY 9, przeznaczona do strugania drewna litego na zadaną grubość. Sprawdzi się w zakładach stolarskich przy obróbce desek, kantówek oraz elementów meblowych. Maszyna wyposażona w wał spiralny z wymiennymi, wieloostrzowymi płytkami skrawającymi. Rozwiązanie umożliwia obracanie poszczególnych płytek po zużyciu krawędzi oraz wymianę pojedynczego ostrza w przypadku uszkodzenia. Panel elektroniczny ELGO z wyświetlaczem i klawiaturą numeryczną ułatwia ustawianie wysokości roboczej. DANE I WYPOSAŻENIE: – producent: ROJEK, – model: RFT 630, – seria: INDUSTRY 9, – typ maszyny: strugarka grubościowa do drewna, – wał spiralny na wymienne płytki skrawające, – płytki z czterema oznaczonymi krawędziami, – elektryczna regulacja wysokości stołu, – panel sterowania ELGO P4011, – dodatkowa mechaniczna skala wysokości, – masywny stół roboczy z rolkami, – czterokolumnowe podparcie stołu, – osłony harmonijkowe kolumn, – mechaniczny posuw materiału, – segmentowy, metalowy wałek podający, – zabezpieczenie przeciwodrzutowe, – podnoszona górna pokrywa z wygłuszeniem, – wyłącznik awaryjny. ZASTOSOWANIE: – struganie desek i kantówek, – nadawanie elementom jednakowej grubości, – przygotowanie materiału do klejenia i dalszej obróbki, – produkcja elementów meblowych i stolarki drewnianej. Prsdpo Aggbmefx Adlec

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories Pjdpfjwtdi Aox Adlerc - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Podpfx Aj Agnz Nedlerc Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: used, Year of construction: 1984, Table length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2800 mm Predpfxj Af Hmps Adlec Cutting depth: 145 Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: Speeds: 4 Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg