Used Bruks Rr for sale (2,117)

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Tsdeyaqbqopfx Amyja Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. Tjdpfx Aoyh Umwomyoa The chipper is feeded from a vibro conveyor and feeding bin. Included is also Bruks chip screen type Bruks BS3. Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Infeed opening , width 540 mm, height 300 mm

Year of construction: 2014, condition: good (used), Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The unit is manufactured by RR Mechatronics and is often used in combination with hematology analyzers from Sysmex. Purpose and Function The RPU-2100R (Reagent Production Unit) is used to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a standalone unit with all components housed in a single, enclosed enclosure. The enclosure features removable, epoxy-coated metal covers. All external connections and the ON/OFF switch are located on the rear of the unit. All user-serviceable and replaceable components are accessible via the front door. The cart for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be attached to any three sides of the unit. Features and Capacities The RPU-2100R focuses on optimizing reagent management for high-throughput laboratories: Reagent Concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per Concentrate: Up to 8,250 complete blood counts per month can be performed with a 10L container without reagent changes. Up to 16,500 complete blood counts per month are possible with a 20L container. Shelf Life: Once opened, the reconstituted reagent has a shelf life of 30 days. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog Number: NARP109010 External Connections Power Supply, Euro Plug Ethernet/USB (NARP109010 only) RJ45/USB-B RS-232 (NARP109000 only) 9-Pin SUB D Connector External Connections (Liquids) Water Connection: G ¾" Thread Tedpeyk U Dwofx Amysa Reagent Dispensing Connections (4x) Push-in Hose Connection, 6 mm Outer Diameter Waste Connection (1x) Hose Barb, 12 mm Inner Diameter Reagent Concentrate Maximum Dimensions: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Peak Reagent Dispensing Rate: 0.5 Liters/Minute for 6 Minutes max. (at (with full reservoir and overflow tank and new pre-filter) 1 liter/minute, 2 minutes max. Filtration: Air filter, bacteria filter, pore size 0.2 µm Liquid pre-filter: Particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter: Bacteria filter (sterilized), pore size 0.2 µm, self-venting System dimensions: Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Water tank volume: 2.5 liters Reservoir: 2.5 liters Mixing tank: 0.6 liters Overflow tank: 0.6 liters Language selection available: German, English, Spanish, French, Hungarian, Italian, Dutch, Swedish Swedish (spreadable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2001, functionality: fully functional, 2N RR N.2 nastri a rullo per legno massiccio e impiallacciato Todpov E I U Ujfx Amyoa Two roller belts for solid wood and veneer 2 B~nder/Rollen f~r Massivholz und Furnierholz 2 rubans • Bandschwingung-und-zentrierung mit pneumatischem System und geschlossenem Stromkreis ~ rouleaux pour bois massif et plaqu~ 2 Bandas de rodillo para madera maciza y chapeados • Vorschubgrenzer mit Notaus • Bremse f~r Banddrehungsarretierung • Schwingende bandspannende Rolle • Dr~ckrollen aus Stahl • Yo rd ere Sicherheitstange • Mechanische Dickenzeige • Teppichschutzvorrichtung mit 2 Eingaberollen und 2 Ausgaberollen • Absaug~ffnungen 160 mm, the Band • CE Yorschriften

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Tsdeywydqspfx Amyea

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Todpsywx Iusfx Amyja

Condition: used, Year of construction: 2007, functionality: limited functionality, We are selling a grinding machine made by KINKET. The machine is functional; the only issue is that the sensor, which prevents the belt from slipping by securing it laterally, is defective. If you are interested, please contact us. Todpfxeznv Uko Amyoa

Condition: used, machine/vehicle number: 007613, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: adjustable Vacuum feed belt: yes Todex A Tagepfx Amyea No. Operating units: 3 Nr

Condition: excellent (used), Linear bearings, linear rails, linear guides, roller guide rails, for guide carriages, guide rails, curved guides, cam bearings, cam track bearings, profile rails -Condition: New -Y3N 215 -Rail length: Arc length 855 mm -Radius: 800 mm Tsdpfx Ameb A Ivpeyea -Rail width: 35 mm -Number: multiple occurrences

Condition: good (used), machine/vehicle number: 923577, Year of construction: 2005, operating hours: 6,607 h, €6,500 net BT RR B2 electric reach truck with scale and height indicator Year of manufacture (equipment): 2005 Operating hours: 6,607 h Year of manufacture (battery): 38/2023 Battery capacity: 560 Ah at 48 volts Load capacity: 1,600 kg Overall height: 2,980 mm Lifting height: 6,750 mm; of which approximately 2,330 mm is free lift Overall dimensions approximately: 1,300 mm wide; 2,500 mm long (retracted) With integrated scale via oil pressure in 50 kg increments and lifting height indicator from 2.33 m Side shifter Tilting function 360-degree steering possible Tjdpszhx Umefx Amyja For a reach truck, this unit is very "off-road capable" and does not get stuck on every small obstacle. Weight approximately 3,500 kg including battery Including charger The equipment is in perfect working order and is immediately ready for use. Affordable delivery with a specialist company is possible. Please also check out our other listings. We constantly have many more high-lift and low-lift trucks and reach trucks in stock. Do you need spare parts for your reach truck, high-lift truck, etc.? Simply contact us. Not the right equipment? Just send us an email with your requirements and we will see if we can find the right one for you. ID: 923577

Condition: excellent (used), CATALOGUE NUMBER 8021 TECHNICAL DATA - max. width of the workpiece: 1100 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating 2) grooved rubber roller - motor power: 11 kW - brake - from above: - split, sliding metal roller - pressure roller - unit - pressure roller - unit - pressure roller Todpfx Amjzdfnyoyea - cleaning brush - from below: - 2 sliding metal rollers - conveyor belt - 2 sliding metal rollers (outlet) - new conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - feed motor: 1.5 kW - grinding thickness potentiometer - working pressure: 8-10 bar - dust extraction nozzle diameter: 3x165 mm, 1x140 mm - overall dimensions (L/W/H): 1870x1850x2210 mm - weight: 2165 kg ADVANTAGES - Made in Italy, SCM brand - New conveyor belt - 2 units - Grinding thickness potentiometer - Unpainted - Used sanding machine, very good condition Net price: 26900 PLN Net price: 6405 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to higher fluctuations)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tjdpei Ri I Nefx Amysa Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Wiring Diagram No.: 8.62-00001 Todpfxopr Ut No Amyea Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Tedpozfp Hhsfx Amyja

Condition: ready for operation (used), Year of construction: 2009, An electric reach truck Toyota (BT) is available. Rated capacity: 2500kg, load center: 600mm, lift height: 8000mm, free lift: 2757mm, max. travel speed: 12km/h, gradeability with/without load: 12%/7%, wheelbase: 1600mm. Machine dimensions X/Y/Z: approx. 3200mm/1300mm/3350mm, weight: approx. 5000kg, operating hours: approx. 5438h. The battery of the machine was replaced in 2016. Documentation available. An on-site inspection is possible. Todjzc Rfhspfx Amyea

Condition: good (used), Year of construction: 2008, Reach truck, BT, 1.6 t, lift height 5.40 m, - used - : Price (net, ex location): only €4,950! Todjxv Tndjpfx Amysa Manufacturer: BT Model: RR B2 Year of manufacture: 2008 Rated capacity: 1,600 kg Weight without battery: 2,235 kg Battery weight: max. 1,074 kg / min. 865 kg Battery voltage: 48 V Lift height: 5,400 mm Load center: 600 mm At load center 800 mm: rated capacity 1,250 kg Including charger Condition: good Available: approx. from early December Location: Düsseldorf

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 415 mm, Tested forklift battery for your truck – 48V 3PZS 375Ah – Special tank + 1 year warranty + Including Aquamatik (automatic watering system) + Including end connectors & REMA 320 plug (other plugs can be installed if required) + Capacity: min. 90–100% (C5 capacity report supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Tedpfx Amjy Rnmajyoa Weight: approx. 580 kg Suitable for the following models and others: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Toyota 7FBR13 Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Gjbnswqdtis Nkmgxsbp Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Common battery sizes available – please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 847 mm, total length: 694 mm, total width: 647 mm, Tested forklift battery for your truck - 48V 4PZS 620AH - special tray + 1 year warranty + incl. Aquamatic watering system + incl. end connectors & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 694 mm Width 647 mm Height 847 mm Weight: approx. 920 kg Suitable for the following models and others: Jungheinrich ESE 430 Jungheinrich ESH 450 Jungheinrich ETH Jungheinrich ETM 214 Jungheinrich ETV 320 Toyota 6FBRE12 Toyota 6FBRE14 Toyota 6FBRE20 Toyota 7FBRE16 Toyota 7FBRE20 Toyota/BT OME 100 H Toyota/BT OME 120 HW Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-E 2 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Todpfx Aoy Rninemyea Toyota/BT RRE 140 Toyota/BT RRE 160 Toyota/BT RRE 180 Toyota/BT RRE 200 C Baoli KBE 20 Baumann DANCER Caterpillar NR14H Caterpillar NR16NH Clark CRT 14/16/20 Clark TMX 15 Fiora PK200 Combilift AISLE-MASTER 15 E Heli CPD 20 Heli CPD 25 Hubtex MQ 20 Hubtex MQ 25 Hubtex MO 30 Hyster J2.0-2.5GX Hyundai 25BRJ-9 Mitsubishi RB14NH Mitsubishi RB16K Mitsubishi RB16NH Common battery sizes available on request. Transport possible.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 8,562 h, functionality: fully functional, Single-shaft shredder, rotor ripper, hydraulic drive, HÄGGLUNDS hydraulic power unit, SIEMENS 132 kW electric motor, cutting chamber approx. 2800 x 1300 mm, shaft length approx. 2400 mm, feed hopper 4000 mm x 2500 mm, base/frame split for transport purposes, dimensions: length 4500 x width 3300 x height 1400 mm. Inspection and test run possible by appointment. Tedpfx Aev Hr Nxemyea

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5380x1860x1760 mm Weight 6050 kg Tedpov A Hryjfx Amyoa Total power requirement 54,75 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4750x1860x1760 mm Weight 5650 kg Total power requirement 47,25 kw Tjdpfxsv A Hqvj Amyea

Condition: reconditioned (used), Year of construction: 2011, compl., overhauled welding robot system incl. Todecrtlispfx Amyoa robot RT 330 on rotary gallow, control K 5, gasnozzlesensing, seam tracking ( option), mech. torch cleaning, pressure amplifier, welding equipment Fronius TPS 4000, wire feeder, torch, torch hose package 1 light beam start box, 1 2 stations turning table with H frame and 2 turning tables RP 150 A ( load capacity 300 kg), distance of surface plates 2700 mm, swing radius 600 mm warranty: 6 month for material

Condition: used, Battery changing rack, transport rack, storage rack for forklift batteries Changing table, battery pallet, battery changing system, battery changing cart Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Load capacity: 2 x 500 kg per compartment = 1000 kg Compartment dimensions per slot W x D = 300 x 920 mm Tjdpfofgpfpsx Amyoa Compartment dimensions without center divider W x D = 655 x 920 mm Adjustable height: 80 to 200 mm - Center divider can be removed - Also suitable for flat materials - 16 galvanized steel rollers Ø 50 mm - 4 swivel casters Ø 100 mm, 2 with brakes - Swivel casters individually adjustable in height via threaded rods Overall dimensions L x W x H 1050 x 950 x 615 mm Weight: 85 kg Good condition

Condition: good (used), functionality: fully functional, Wide Belt Sander CB 1300 R+RR Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB • Model – 2NRKRR13002N • Working width – 1300 mm • 2 sanding units: - First: calibration roller, made of hard rubber – diameter 230 mm - Second unit: 2 rollers, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic indicator for workpiece thickness • Photoelectric sensor-controlled oscillation • Infeed/outfeed extension rollers • Electric up/down adjustment • Thickness gauge for sanded material • Safety sensor to prevent oversized material entry • Original paintwork • Sanding belt size – 1340 x 2200 mm • Extraction ports – 3 x 180 mm Todpfx Amsw U D Duoyoa • Weight approx. 2200 kg • Machine from the early 1990s • Dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Excellent original technical and visual condition • Photos shown reflect the actual condition of the item for sale • On-site power-up and inspection possible

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Tsdpfxjfxpbmo Amyoa