Used Bezner Rf 30 - 120 -3Mk for sale (33,855)

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Fjdpfx Alju E E A Tobogg Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2015, Krauss Maffei KM 1300-12000 MX injection molding machine LRX 350 robot Year of manufacture: 2015 Technical data Clamping unit • Clamping force: 13,000 kN (1300 tons) • Opening force: 910 kN • Platen dimensions: 2210 × 1910 mm • Tie bar spacing: 1570 × 1270 mm • Mold opening stroke: 2350 mm • Maximum opening: 3050 mm • Mold height: 700–1400 mm • Ejector stroke: 350 mm • Ejector force: 250 / 125 kN Injection unit • Screw diameter: 105 mm • L/D ratio: 23 : 1 • Maximum injection pressure: 2296 bar • Injection volume: 5195 cm³ • Injection weight (PS): 3689 g • Injection speed: 99 mm/s • Injection rate: 856 cm³/s • Maximum screw speed: 144 rpm • Plasticizing rate (PS): 130 g/s Electrical equipment • Pump motor power: 132 kW • Heater power: 75 kW • Number of heating zones: 7 • Oil tank capacity: 2440 l Dimensions Fedezinanopfx Albegg • Machine weight: 70 tons • Dimensions: 13.65 × 3.65 × 2.82 m Krauss Maffei LRX 350 robot • Maximum payload: 35 kg • X-axis: 1200 mm (servo drive) • Y-axis: 1000 / 1000 mm, telescopic (servo drive) • Z-axis: 3500 mm (servo drive) • C-axis: 0–90°, pneumatic drive • C-axis torque: 60 Nm • Absolute position measurement system

Condition: ready for operation (used), Year of construction: 1998, pressure 120 t chamfer lenght 3050 mm distance between columns 2550 mm stroke of upper beam 155 mm throat 350 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 77.0 mm/sec Control "P 40" work height max. 878 mm table width 104 mm oil volume 150 l total power requirement 11.0 kW Fjdpfx Alsx Ni Ebsbegg weight 7550 kg range L-W-H 3550 x 2150 x 2600 mm - in checked conditions - machinevideo - ?v=bUaEa_nHZ6E Equipment: - NC electro-hydraulic press brakes - with NEW ELGO NC control unit "P40" * New price approx. 4.000 Euro * Control / movement of the backgauge - X axis (target/actual input) * Control / movement of the depth setting - Y axes (target/actual input) * Inching mode for X axis Y axes also possible - Swivel operation, front left - NC controlled axes : Y1 Y2 X - NC electro-motorized backgauge (X axis) * with 2x manually adjustable stop fingers * including lateral and height adjustment (Z R axis) - 1x branded set of upper tools (split) - 1x branded Multi-V bottom die block - Lateral safety guard (hinged doors) - Rear safety guard (hinged door) - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000 with Siemens Sinumerik 810D Cycle Control (Teach-In) The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work. Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors. Working Area Distance between centers: 3,000 mm Swing diameter over bed: 1,200 mm Swing diameter over cross slide: 850 mm Cross slide travel: 620 mm Bed width: 750 mm Spindle Spindle nose: DIN 55027 size 11 Spindle diameter front bearing: 190 mm Spindle bore: 104 mm Speed range: 5 – 900 min⁻¹ Fgjdpfxszdd E Ro Albog Max. torque: 6,000 Nm Main Drive Drive power: 37 / 52 kW (100% / 60% duty cycle) Feed X-axis feed force: 24,000 N Z-axis feed force: 16,000 N Rapid traverse X: 7 m/min Rapid traverse Z: 4 m/min Tool Holder Turning tool cross-section: 40 × 40 mm Electrical Data Supply voltage: 400 V Frequency: 50 Hz Max. current consumption: 200 A Workpiece Weights (Manufacturer specifications for standard configuration) Between centers without steady rest: 5,000 kg Between centers with 1 steady rest: 6,000 kg Between centers with 2 steady rests: 7,000 kg Flying in faceplate: 1,800 kg Chip Conveyor 2 x AME Chip Conveyors Manufacturer: AME GmbH, Emsdetten Type: S8 300 Tlg. 63 Year of manufacture: 05/2016 Not Included: Tailstock Steady rests Note The machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Serial number: 990101 Tip width: 3000 - mm Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Year of construction: 2,000 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm Fgsdpfxodx R Tfs Albeg - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, shaft length: 10,700 mm, laser power: 30 W, Laser engraving machine with 30-watt laser power - Laser source: 30-watt CO2 metal tube Fgedpjirmgmofx Albeg Demonstration machine with minimal operating hours - Includes Windows 10 Pro 64-bit PC system - Includes 22" monitor - Everything is pre-installed and adjusted - Engraving software in German - Very easy to use - Simply switch on and start - CO2 laser source with 30 watts for high-contrast and fast markings with extremely high resolution - Deep engraving possible - Wobble function - For engraving on e.g., wood, plastic, anodized surfaces, etc. - Heavy-duty industrial quality - Complete system / ready for immediate use - Work area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with mounting threads in a 50mm grid - LED work area lighting - 50mm pipe connection for smoke extraction - Engraving area approx. 180 x 180mm - Expandable up to approx. 300 x 300mm - Includes foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to business customers. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: as good as new (ex-display), Year of construction: 2025, Holzkraft FS 30 Classic Tersa Planer-Jointer with Tersa cutterhead and planer knives - quick-change system The Tersa planing knife system enables knife changes in seconds and ensures particularly quiet operation. Helically toothed steel infeed roller for consistent and even wood feed. Extra-long planer tables. Large fence can remain in its position when the planer tables are opened. Planer tables open towards the rear. High machine weight. Powerful industrial motor. Robust steel and cast iron construction. Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. chip removal: 4 mm Dimensions of thickness table: 565 * 300 mm Min./max. working height: 3/230 mm Feed speeds: 7 m/min Planer spindle diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 hp) Dust extraction nozzle diameter: 2 * 120 mm Fgodpobuldysfx Albsg Scope of delivery: Tersa planer cutterhead Anodized fence Available from stock in Bitburg - immediately available -

Condition: used, Year of construction: 2009, Adhesive application machine Manufacturer: Wirth Fodpfx Aljzuzvyjbegg Type: LW 120.5/1300 Year of manufacture: 2009 Technical data: - Roller width: 1300 mm - 2 rollers (application + metering) - 1 spare application roller Note: Cables cut. Special price: 1,000.00 EUR

Condition: excellent (used), Year of construction: 2015, KRAUSS MAFFEI KM 1300-12000 MX injection molding machine Year of manufacture: 2015 Equipment: Krauss Maffei LRX 350 linear robot Clamping unit Clamping force: 13,000 kN (1300 tons) Hydraulic-mechanical two-platen clamping system 4 pressure pads 4 adjustment units on the moving platen Fully hydraulic clamping system Technical data Mounting plate dimensions: 2210 × 1910 mm Distance between columns: 1570 × 1270 mm Mold opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN Injection unit Complete plasticizing unit for thermoplastics, designed in an abrasion-resistant version. Technical data Screw diameter: 105 mm Injection pressure: 2296 bar Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plasticizing rate (PS): 130 g/s Control system The machine is equipped with a modern Krauss Maffei MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Equipment includes: 19-inch color touchscreen ProcessDesigner process visualization Full machine diagnostics Advanced process parameter setting functions PV injection unit adjustment Electrical and hydraulic equipment Fsdjzqdibepfx Albsgg Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 liters Dimensions and weight Length: 13.65 m Width: 3.65 m Height: 2.82 m Machine weight: 70 tons KRAUSS MAFFEI LRX 350 linear robot The machine is equipped with a Krauss Maffei LRX 350 linear robot, designed for automatic part removal. Robot parameters Payload: up to 35 kg Part removal on the side opposite the operator Range of motion X-axis (removal from the mold) 1200 mm servo drive Y-axis (vertical) 1000 / 1000 mm (telescopic) servo drive Z-axis (transverse) 3500 mm servo drive C-axis rotation 0–90° pneumatic drive torque 60 Nm In addition: absolute positioning measurement system.

Condition: like new (used), Year of construction: 2014, Advertisement description CATALOG NO. 6526 TECHNICAL SPECIFICATIONS - track width 300mm - shaft width 300mm - max blade diameter 350mm - disc bore diameter 70mm - max cutting height 120mm FROM TOP: Fsdpjudhzyjfx Albjgg - 2 rows of ratchets - smooth pressure shaft, sliding - pawls - smooth, slipping, pressing roller - saw shaft - 3 smooth pressure, slipping shafts Bottom: - guide - pawls - track - infinitely variable speed feed - main motor 45kW - feed motor 1,5kW - central lubrication - diameter of the extraction stub 180mm - dimension of table top 1900x870mm - dimensions L/W/H 2540x1520x1600mm - weight 2000kg - possibility to check on the spot purchase and transport

Condition: ready for operation (used), Year of construction: 2008, power: 11 kW (14.96 HP), stroke length: 180 mm, throat depth: 335 mm, Equipment: CE marking, Hydraulic press brake Manufacturer: DURMA, Type: E-30120 Year of manufacture: 2008 Technical data: Manufacturer: Durma Type: E-30120 Year of manufacture: 2008 Press force: 120t Working length: 3050 mm Stroke of upper beam: 180 mm Throat depth: 335 mm Distance between uprights: 2550 mm Dimensions: approx. 3.25 x 2 x 2.65 m Connected power: 11 kW Weight: approx. 7,400 kg Equipment: • Amada tool clamping system • Durma DU 6000 control system • Sick C-4000 safety device • CNC-controlled crowning • Controlled axes: Y1, Y2, X Fgodpfx Aezbixkelbeg • R axis + Z axes manually adjustable • 2 support arms, laterally adjustable • Tool package Upper die, straight, segmented approx. 3300 mm, R0.8 75° Upper die, bent, approx. 3300 mm segmented Lower die, 4-way block: V16, V20, V35, V50 All information without guarantee. The machine comes from the workshop of a Hamburg film studio. A demonstration with power supply is possible at any time.

Condition: good (used), Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Gearbox: Worm gearbox Crane gearbox -Type: unfortunately without a type designation -Translation: i = 7 : 1 -Hollow shaft: Ø 30 x 120 mm / Ø 19 x 43 mm -Dimensions: 210/200/H220 mm Fgjdpfeziyh Rjx Albeg -Weight: 13.9 kg

Condition: used, Year of construction: 2021, operating hours: 3,500 h, clamping force: 120 kN, displacement volume: 36 cm³, injection pressure: 2,200 bar, overall weight: 5,400 kg, screw conveyor diameter: 22 mm, terms of delivery: EXW (ex Works) Fgjdpfxjzhpg To Albjg delivery time: on request terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Fgedpfey Hqwyox Albsg Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: used, Year of construction: 2009, Colour: White - Details: - └ Description: Exclusive Makor - Year: 2009 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MKR30029343 - Rail present: No Fgedpfxswnh I Ej Albjg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), functionality: fully functional, load capacity: 120 kg, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Fgodpfx Ajrqf Tcjlbjg Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Condition: used, Machine vice, clamping claws, clamping jaws, stable clamping jaw, stable clamping jaw, clamping claws, pull-down clamp, pull-down jaw, side clamp -Stable clamping jaw: Stable clamping jaw height adjustable -Clamping jaw: 120 x 30 mm -Clamping height: max. 225 mm -Groove width: 25 mm -Number: 4x clamping jaws available -Price: per piece Fedpfx Alju Rv R Eebegg -Dimensions: 240/120/H130 mm -Weight: 15.1 kg/piece

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Fgjdoztn I Hepfx Albsg Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Fsdpfjd Aqqzex Albegg Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2016, I sell the 2-head roller coating machine for surface finishing at parquet production Cefla Sorbini Smart Parquett MRF/300. Year 2016. Configuration: 2-head roller coater Oil type: Oxidativ, UV, Let Oil load : 4 – 30 gr/m2 + brand new unused vacuum pump Fgsdpfx Alozn Axcjbog +2 pcs. new rubber cylinder +1 pc. new feeding band Working width: 300mm Total length: 2,30m Total width: 1,30m Weight: 960kg Available immediately. Fully working. Still in production. Possible to run and test. Documentation and CE included.

Year of construction: 2022, condition: like new (used), functionality: fully functional, We are presenting the almost brand-new EyeC GmbH EyeC Proofiler 1200 DT (EyeC 3023) Print Inspection & Quality Control System. HIGH CONVERSION DESCRIPTION Like New - Immediate Availability - Priced to Sell - Ready for Export Model: EyeC Proofiler 1200 DT Condition: Like New - barely used EyeC Proofiler 1200DT print inspection system in excellent condition, barely used and fully operational. This is a great opportunity to acquire a high-end inspection system at a significantly lower price. ✔ Print-to-Print & Print-to-File Comparison ✔ High-precision defect detection ✔ Suitable for pharmaceutical, packaging, and commercial printing The machine is installed and can be tested. Additional photos and videos are available upon request. 🌍 Available for export 📍 Located in Turkey ✈️ Delivery Terms: EXW Turkey – ready for export ⚠️ Serious buyers only - quick decision preferred 📧 Contact now for price discussion and details ▪️ Inspection Type: Print-to-print & Print-to-file comparison ▪️ Application: Print Inspection & quality control ▪️ Max. inspection width: approx. 1200 mm ▪️ Camera system: High-resolution line scan camera ▪️ Lighting: Integrated LED illumination system ▪️ Defect detection: Missing print, color deviation, misalignment, defects ▪️ Software: EyeC Proofiler Software (original) ▪️ Operation: PC-Controlled System ▪️ Speed: High-speed automated inspection Fgodpfx Ajyxfrpslbsg ▪️ Industry: Pharmaceutical, packaging, commercial printing The machine is installed and can be demonstrated upon request. If you have any questions or need further information, you can send us a message or call us. You can also reach us via email or WhatsApp.

Condition: like new (used), Year of construction: 2010, machine/vehicle number: IntNr231643, LTA AC 3001 _E120 Infinitely variable fan speed control (0-10V in the 230V version) · Low energy consumption thanks to filter elements with minimal pressure loss and energy-efficient fans · Filtration stages for the separation of coolant mist · Mechanical solid particle filter · Suitable for use with oil/emulsion mist Fgodpfjzx Rwbex Albeg · High-voltage generator with two pre-programmed voltage levels · Direct mounting on the machine is possible · Separation efficiency of up to 99% - Dimensions (L x W x H): 1130x625x610 mm - Weight: 135 kg Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Safan 120-4300 TS-1 CNC Pressbrake Fsdpfxezdgnbs Albogg Year 2004 Pressing Force 120 Ton Bending Length 4,300 mm Distance between Uprights 3,600 – 3,700 mm Maximum Stroke 180 mm Open Height (Table to Ram) 510 mm Throat Depth 400 mm Table Width 160 mm Main Motor Power 7.5 kW Control System Safan TS-1 CNC Number of Controlled Axes Typically 4 Axis (Y1, Y2, X, R) Electrical Supply 400V / 3 Phase Machine Weight Approx. 11,700 – 12,300 kg Machine Dimensions (L × W × H) Approx. 4,500 × 1,650 × 2,900 mm

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Fsdowxdrbjpfx Albjgg Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Fjdszgv Uujpfx Albjgg Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.