Used Avermann Mpc 20 Pel for sale (28,946)

Condition: like new (used), mileage: 2,200 km, Year of construction: 2021, OPEL CORSA FULLY ELECTRIC, YEAR 2021, COMMERCIAL VEHICLE WITH 2 SEATS, ONLY 2,200 KM, AUTOMATIC TRANSMISSION, LED HEADLIGHTS, PARKING SENSORS, STEERING WHEEL CONTROLS, AS NEW. RANGE 350 KM. FINANCING OR LEASING AVAILABLE ON SITE. Dujdpfx Aieyx Hqajwet

Condition: used, Year of construction: 1999, Technical details: pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m Djdpfxoymc Txo Aiweut *

Year of construction: 2008, condition: used, functionality: limited functionality, working width: 2,000 mm, machine/vehicle number: AIDB0007, NIR sorter Pellenc Mistral 2000 in ready-to-use condition; operated only with dry material, including steel construction, acceleration belt, and expansion hood with separating edge. Dujdpfjymlvpox Aiwet

Condition: used, mileage: 109,121 km, power: 107 kW (145.48 HP), fuel type: diesel, overall weight: 3,040 kg, maximum load weight: 1,205 kg, first registration: 12/2016, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, power assisted steering, For information Dodpfx Aijv T D Dzswout

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2025, 1) Log Yard with 10 Boxes (Drop Boxes) – New and Used Log Feed and Sorting Line New Feed rate 50 m/min. as well as the following used components: Comprising: New cross feed conveyor, step feeder Used log transfer carriage, Used log transfer carriage with ejector, Used Cambio 50 debarker, Used split detection unit with belt, Measuring section, sorting log carriage. Dsdpfoykr Aqsx Aiwjut Including debarking; Inspection and Painting; including log infeed. Without boxes, sheet metal cladding, measuring system, discharge control, or control cabinet. Root reduction. 2) Log Infeed for Canter Line Heavy-duty cross log conveyor NEW Cross log conveyor in 4-strand execution Axle spacing: 7.5 m Total length: 8.0 m Drive shaft: 100 mm diameter Chain: Bush conveyor chain, pitch 100 mm – heaviest version Fixed rear stops, without sheet metal cladding Steel substructure: HEB 200 Construction height: 1000 mm Drive: geared motor 7.5 kW 3) Equalizer NEW Number of chains: 4 Axle spacing [mm]: 3500 Overall width [mm]: 5730 Paddle spacing [mm]: 1000 Drive shaft diameter [mm]: 100 Drive SEW [kW]: 7.5 Speed [m/min]: 10 Design: completely sheet metal covered between chain runs 4) Step Feeder NEW Feed steps: 4 Overall width [mm]: 4200 Plate thicknesses [mm]: moving steps 12 mm, fixed steps 20 mm Drive SEW [kW]: 18.5 Drive via crank mechanism and geared motor 5) Canter Line (WD brand) Log transfer carriage before RB 2 infeed Length extension to 18.5 m – drive and deflection RB 2 infeed with powered steel chain bed, designed for lateral log infeed. Conveyor chain with carrier dogs, frame in welded construction. Intake and centering unit ZE with log rotation unit TDV and centering device. Feeding unit ZE Log length: 2.5 – 5 m Clear width: min. 80 mm Clear width max.: 780 mm Construction height: 1000 mm Weight: 5400 kg Profile canter FZ 3 Machine frame with base frame 2 knife head housings with main shaft bearing, 2 knife heads with finishing segments, Drive power 90 kW Log diameter: min. 100 mm, max. 400 mm Chipping height above the chain max. 515 mm Distance between disks max. 570 mm Distance between disks min. 60 mm Disk diameter: 1260 mm Positioning via electric motors 2 hydraulic units 35 kW hydraulic pre- and post-cut Pre-cut square timber turning device Electrically powered roller conveyor TR 800 Centering and feeding unit ZE with FZ 3 canter

Condition: good (used), Year of construction: 2002, Manufacturer: BRÜCK Tip: 12/1600 Duodpfx Aiehrnbkowot Load capacity: 12000 kg Max sheet width: 1600mm Coil diameter: 1800mm Weight : cca 14 t Without control cabinet!

Condition: good (used), The scope of delivery includes: 01x stacking container, used Material color: gray Total width: approx. 975 mm Inner width: approx. 915 mm Total depth: approx. 635 mm Inner depth: approx. 565 mm Total height: approx. 555 mm Inner height: approx. 400 mm Foot dimensions: approx. 110 x 110 mm Underground height: approx. 140 mm Volume: 220 liters Weight | Piece: approx. 11.50 kg Your contact person in our company: Mr.: Andre Evering Duedpfx Aijtpgptowot Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x stacking box, used External dimensions: 400 x 300 x 120 mm Internal dimensions: 360 x 260 x 117 mm Duedpfx Aijw E Ixrowet Colour: similar to anthracite grey Weight: 0.62 kg per unit Notes: The material is food-safe and made of polypropylene (PP). General information about the item: This item is only offered for collection. Delivery or shipment of this item will incur additional costs, which can be quoted separately depending on the place of delivery and the scope of delivery.

Condition: excellent (used), Year of construction: 2007, Zeppelin Diesel Genset Type: PPO2000 - C32 Duedpfeizbdaox Aiwet Serial No.: ZPSU1023; Arr.No: 273-9683; Year: 2014; Voltage [V]: 400; Rating [kW]: 1600; Rating [kVA]: 2000; speed [RPM]: 1500; Frequency [Hz]: 50; SMU [hrs]: 0; Application: prime; Layout: Canopy; condition: pre-owned; Notes: Diesel Engine 2 * CAT C32 PPO, new Stamford HC6J alternator, with ComAp automatic Panel Inteli Compact, 2 x circuit breaker, 4000 L in two fuel tank, Jacketwater heater. L/W/H: 11 m,/ 2,3 m/ 3,2 m, weight. 26t, Import duty unpaid.

Year of construction: 2004, condition: used, functionality: fully functional, Silo Manufacturer ZEPPELIN Content 10m³, height 2.50m, diameter 2.0m Year of manufacture 2004 The system is available 3 times Subject to prior sale Dsdpfx Ajualkkoiwsut Please send inquiries by email only Note: The machine/unit is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. This is not part of the offer price.

Condition: good (used), Refrigerant system Copeland with original condenser Type: D6DT5-320X-AWM/D (x4) Volume: 126.9 m3/h (x4) Dodpfx Ajg N Hu Sjiweut Cooling capacity: 220 kW at -10°C/40°C, 56.2 kW at -35°C/40°C Refrigerant: R404A With original condenser Guntner GVH 067B/2x3N Pieces in stock: 1 Condition: Used We have many other refrigeration machines. Chillers, compressors, coolers, condensers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is available on machineseeker.

Condition: used, Year of construction: 2021, Front and rear mudguards German TÜV approval 40 km/h for GPS cutting unit / Capello direct cutting unit Capello XC Spartan 520 SUITABLE FOR FENDT KATANA 65 . / TSWD-40MBDISC 2-axle SW wagon with double frame 40 km/h version with / overrun Bre Duodpsrxr Tqjfx Aiwot

Condition: good (used), Hang Piccolo 101-20 Eyeleting machine The machine is in perfect condition and ready to use. Made in Germany. Technical specifications: 1 head Eyelet diameter inside the hole: 4 mm. Dsdpfx Aioy N Dw Sowsut Maximum capacity: 20 sheets of 80gsm Front margin: 40 kg. Foot pedal operation The machine punches, feeds, and crimps the eyelet in a single pass.

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, empty load weight: 2,190 kg, loading space volume: 20.7 m³, loading space width: 6,000 mm, loading space length: 2,300 mm, loading space height: 1,500 mm, Price on request. Price applies ex-warehouse 33106 Paderborn! Quantity discount possible when purchasing multiple containers. Leasing/hire purchase available. 6 units available at short notice, other RAL colors available by request. Other models and sizes available ex-stock Paderborn. You are welcome to view our stock inventory on our website. Roll-off containers according to DIN 30722-1 Technical specifications: • Internal dimensions: 6000 x 2300 x 1500 mm (L x W x H) • Usable volume: 20.7 cbm • Tare weight: 2190 kg • Floor: 5 mm S 235 steel • Side walls: 3 mm S 235 steel • All plates and profiles continuously welded • Double-wing door with security lock • Container inspected and approved according to DGUV Rule 114-010 • Warning markings as per DIN 67520 • Standard ladder, bolted, galvanized • Floor to side wall connection 45° • Hook diameter 50 mm, S 355 grade steel Dodpfx Asy Nxzfsiwout • Hook height 1570 mm • Top frame: round tube Ø89×6.3 mm • Mesh hooks • All moving parts greaseable • Steel roller wheels 159×6.3, length 300 mm • Zinc phosphate primer inside and outside, exterior finish with synthetic resin paint (80-100 µ) • Tare weight 2,190 kg • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos for illustrative purposes only! For questions, please feel free to send us a message or call us.

Condition: new, Chiron 1122242 / 562 006 HSK-A63 coupling gripper SN: H308, unused, 100% functional, scope of delivery as per photos. Dedpfx Aoy Np Ipoiwjut

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Dusdpfoy Np Ivjx Aiwst

Condition: good (used), mileage: 215,118 km, power: 163 kW (221.62 HP), first registration: 11/2007, fuel type: diesel, tire size: 285/70 R19,5, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro4, suspension: steel-air, number of seats: 2, total width: 2,600 mm, permissible axle load (axle 1): 5,800 kg, permissible axle load (axle 2): 10,500 kg, loading space length: 6,440 mm, loading space width: 2,250 mm, loading space height: 2,450 mm, Year of construction: 2007, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, spoiler, tail-lift, = Further options and equipment = - Roof spoiler - Remote-controlled central locking - Speed limiter - Tail lift 1500 kg - Radio - Spare wheel - Reversing camera - Side door - Sun visor - Toolbox = Remarks = Ball coupling Reversing camera Cruise control Air conditioning Side door Toolbox 3x Dhollandia DHLM50 tail lift 1500 kg Load bed length: 160 cm Internal dimensions of the loading area: L 504 x W 235 x H 105 L 644 x W 235 x H 245 = Further information = General information Model year: 2026 Registration number: BT-LG-08 Technical information Number of cylinders: 6 Engine displacement: 6,693 cc Axle configuration Tyre size: 285/70 R19.5 Axle make: Anders Brakes: Disc brakes Front axle: Max. axle load: 5,800 kg; Steering; Tyre tread left: 70%; Tyre tread right: 70%; Suspension: leaf suspension Rear axle: Twin tires; Max. axle load: 10,500 kg; Tyre tread inside left: 70%; Tyre tread outside left: 70%; Tyre tread inside right: 70%; Tyre tread outside right: 70%; Suspension: air suspension Weights Unladen weight: 7,020 kg Payload: 7,980 kg Dujdpfx Asytgmpoiwet Gross vehicle weight: 15,000 kg Functional Tail lift: Dhollandia DHLM50, rear liftgate, 1,500 kg Interior Cabin colour: grey Maintenance APK (Technical Inspection): certified until 07.2026 Product safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Dusdpfx Aiox A U Ncewjt Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, mileage: 346,050 km, power: 235 kW (319.51 HP), first registration: 08/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: yellow, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Internal vehicle no.: 3953B ---- Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany. Always over 400 vehicles immediately available at . Largest selection – best prices. Over 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ---- TOP CONDITION! Single owner German vehicle Full service history exclusively by MAN MAN TGM 18.320 Car transporter for up to 3 vehicles Perm. total weight: 18,000 kg Curb weight: 7,850 kg Payload: 10,150 kg Blyss hydraulic double-deck lifting bed (fully galvanized) Sleeper cab with bed Rockinger Varioblock trailer coupling and pin coupling Automatic climate control High-performance winch Integrated extendable loading ramps Aluminum perforated sheet Plastic toolboxes Side panels in vehicle color ---- Warranty & Quality Seal: * Warranty Assistance systems: * Cruise control Safety & Technology: * Air suspension * Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) Comfort & Climate: * Automatic climate control Exterior & Design: * Trailer hitch (AHK) Environment & Charging: Dusdpfx Ajxu Ihcjiwet * EURO VI * Particulate filter * Environmental badge 4 Transmission: * Automatic Additional information: * Non-smoker vehicle * Service booklet ---- New main/ emissions inspection on request. ---- Warranty & 'TÜV Profi Check' are of course available from us! We are happy to accept your vehicle in part exchange! We can also create a tailor-made financing or leasing offer for you! No down payment, can be repaid at any time, and with special repayment options. Let our sales team know your requirements – we are happy to advise you. ---- Schedule a test drive appointment and let us convince you of the quality of our vehicles. To arrange appointments: Mon-Fri 08:30 - 18:00, Sat 09:30 - 13:30 ---- Visit us also at . We look forward to your visit! ---- Errors and changes excepted. The equipment offered online is not contractual. Equipment must be inspected on site.

Condition: used, mileage: 346,050 km, power: 235 kW (319.51 HP), fuel type: diesel, gearing type: automatic, axle configuration: 2 axles, overall weight: 18,000 kg, first registration: 08/2019, emission class: euro6, color: yellow, total width: 2,550 mm, total height: 3,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Internal vehicle number: 3953BX ----Why autonext GmbH? One of the largest commercial vehicle exhibitions nationwide. Always over 400 vehicles immediately available at The largest selection - Best prices. More than 1,000 satisfied customers each year - Top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----TOP CONDITION! Single owner German vehicle Full MAN service history MAN TGM 18.320 Car transporter for up to 3 vehicles Perm. total weight: 18,000 kg Curb weight: 7,850 kg Payload: 10,150 kg Blyss hydraulic double-deck lift platform (fully galvanized) Sleeper cab with bed Rockinger Varioblock trailer coupling and pin coupling Automatic climate control High-performance winch Integrated extendable loading ramps Aluminum perforated plate Dedpsxu Ig Sjfx Aiweut Plastic toolboxes Side paneling in vehicle color ----Warranty & Quality Seal: * Warranty Driver assistance systems: * Cruise control Safety & Technology: * Air suspension * Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) Comfort & Climate: * Automatic climate control Exterior & Design: * Trailer hitch (AHK) Environment & Charging: * EURO VI * Particulate filter * Emissions sticker 4 Transmission: * Automatic Further information: * Non-smoker vehicle * Service history ----DEKRA/MOT on request, renewed. ----Warranty & 'TÜV Profi Check' are, of course, available with us! We are happy to accept your vehicle as a trade-in! We can also provide you with a customized financing or leasing offer! No down payment, can be paid off at any time, special repayments possible. Let our sales team know your requirements – we are happy to advise. ----Arrange a test drive and be convinced by the quality of our vehicles. Appointments: Mon.-Fri. from 8:30 a.m. to 6:00 p.m., Sat. from 9:30 a.m. to 1:30 p.m. ----Visit us at We look forward to your visit! ----Subject to errors and changes. The equipment offered online is not part of the contract. Equipment must be checked on site.

Condition: good (used), Schmedt PraForm HHS 20 Book Press Book press with groove burner. Very good condition. The machine came from a school. Manufactured by Schmedt, Germany. Technical specifications: Maximum format: 350 x 380 x 110 mm Dujdpfxjy Ehm Ne Aiwst Weight: 250 kg Power supply: 380V Flexible temperature control.

Condition: used, Year of construction: 2024, operating hours: 400 h, functionality: fully functional, operating pressure: 1,000 bar, empty load weight: 3,500 kg, fuel: diesel, overall weight: 3,500 kg, HAMMELMANN AQUAJET 20 Engine 200 kW 1000 bar / 110 liters or convertible to 2800 bar / 40 liters Dsdpfx Ajx Exmasiwjut Year 2024 Tel. 6 0 8 8 1 1 7 4 0 E-mail: m z ol m a r o p . p l

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,429 h, load capacity: 2,000 kg, lifting height: 1,660 mm, fuel type: electric, mast type: telescopic, construction height: 1,370 mm, fork length: 1,150 mm, drive type: Elektro, Double-deck stacker Load center: 600 mm Mast type: Telescopic Transmission: Electromechanical Condition: Ready for use and fully functional Technical condition: Very good Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 250Ah Battery manufacturer: Still Battery type: PzS Battery year: 2020 Dusdpfx Aioy A Ub Ujwjt Description: In addition to this unit, we offer a range of forklifts and warehouse equipment. All our machines are workshop and FEM 4.004 inspected. Please contact us by email or phone. You can also find us at hsr-gabelstapler. Of course, we are interested in purchasing your used equipment, even if you do not buy a vehicle from us. Lease-purchase and financing options are available on request and at attractive rates. We are happy to advise you competently and in detail about our vehicles. Load backrest, impulse control, initial lift, non-marking tires, double-deck loading,

Year of construction: 2026, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) Dujdpfov Sybyjx Aiwet - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: excellent (used), first registration: 02/1991, color: other, Year of construction: 1991, 913017 = More information = GVW: 38.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: RP-WT-92 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Dedpsymrwtsfx Aiwout When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A