Used Aceti Edge Milling Machine for sale (65,742)

Condition: used, Year of construction: 1986, Used Machine Cedpfx Aozyy Aijiljrh Year of manufacture: 1986 Features and technical specifications: - Cuts flush with straight and miter cuts (up to 45°) - For solid strips up to 30 mm - Bevel (0–20°) - Rounds veneer and plastic edges - Workpiece thickness: 5–50 mm - Automatic workpiece clamping - Cutting operation triggered by foot switch - Saw blade diameter: 150 mm - Rounding cutter: 100, radius: 2–3 mm - Saw blade tilt: -20° (bevel) – 45° (miter) - Working height: 720 mm - Movable workpiece support: 820 mm - Motor power: 0.55 kW - Pneumatic connection: 5 bar

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW Crjdpfx Aod Af Sheiloh - Space requirement: approx. W 550 x D 500 x H 700 mm - Weight: approx. 65 kg

Year of construction: 1990, condition: ready for operation (used), Multi-edge milling machine for 2 - 4 - 6 edge milling on manual or CNC milling machines Manufacturer WITTE Type: MKF 1001, year 1990. For milling spindle ISO 40 Working range: SW 2 - SW 30 Length: 75 mm Spindle passage: 25 mm Weight approx. 25 kg. Operating instructions available. Cjdpfxsvmglzo Ailjrh

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Csdsr A Eq Repfx Ailerh Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: Cedszyck Ajpfx Ailerh • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours • Number of processed workpieces: approx. 103,500 • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit • Touchscreen control • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Condition: good (used), Year of construction: 1981, Table size 1300 x 400 mm Tool holder DIN 2080 ISO 40 Travel ranges X-axis, automatic/manual 1000 / 1020 mm Y-axis, automatic/manual 350 / 370 mm Z-axis, automatic/manual 430 / 450 mm Speed range, 2 steps 32 – 1400 rpm Quill in vertical milling head yes Milling head, swiveling ± 90° Feed range X/Y-axis, stepless 10 – 1000 mm/min Feed range Z-axis, stepless 4 – 400 mm/min Rapid traverse X/Y-axis 5 m/min Rapid traverse Z-axis 1.8 m/min Drive power, vertical + horizontal 3.2/4 kW Space requirement L x W x H 3200 x 2700 x 2200 mm Weight 2400 kg Accessories / Special features: • NC point-to-point control HEIDENHAIN TNC 131 S • RS 232 interface • Stepless feed • Automatic and/or manual operation possible • Safety devices / prompts to secure the hand crank when the X-Y and Z axes are moved manually, as well as the manual tool clamping • Vertical and horizontal milling spindle • Quill in vertical milling head • Hydraulic axis clamping • Central lubrication • Coolant system Cjdpfx Aod D Tf Heilerh Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Year of construction: 1994, condition: used, Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece Credsu Rv Rxjpfx Ailjh -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Condition: ready for operation (used), Year of construction: 2010, I sell edge sanding machine with milling head STEMAS. 1 pc. Milling head manual adjustable Codpfx Aexznq Deilorh 3 pc. Edge sanding heads tiltable Automatic feeding Return band conveyor for elements Spare sanding bands included. Available immediately.

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Possible to buy also the Radius edge banding machine AKV88D. Codpfx Aijwun H Ujlerh

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) Crodpfxez Ikq De Ailsh - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 was used until recently for milling weld preparation edges Tool holder: SK 50 Loading possible with an overhead crane Credpeyp Dxujfx Aileh

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Crjdpfx Ajy Ni Ivoilsh

Condition: good (used), Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine Codpfed Nzgvjx Ailorh -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Condition: good (used), Year of construction: 2014, Knuth Sinus 330 x 1500 Knuth Sinus 330 x 1500 lathe, manufactured in 2014, in very good original condition. The machine comes from a special production run by a renowned German machine tool company. CE compliant!! Technical data: Year of manufacture: 2014 Knuth Sinus 330 x 1500 Working area: Workpiece length: 1,500 mm Turning diameter over bed: 660 mm Turning diameter over cross slide: 440 mm Turning diameter without bridge: 900 mm Bridge length: 320 mm Bed width: 400 mm Travel distances: Travel X-axis: 368 mm Travel Z1-axis: 230 mm Swivel range of top slide: 45° Main spindle: Spindle speed: 25 rpm - 1,600 rpm Spindle bore: 105 mm Spindle mounting: D1-8 Spindle taper: ø 113 mm / 1:20 Rapid traverse: Rapid traverse X-axis: 2,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Tailstock: Tailstock spindle diameter: 90 mm Tailstock taper: 5 MK Tailstock quill stroke: 235 mm Tailstock cross slide: ± 12.5 mm Drive power: Motor power, main drive: 7.5 kW Dimensions and weights: Dimensions (L x W x H): 3.21 m x 1.23 m x 1.6 m Weight: 2,800 kg About the machine: The Sinus D is the largest series in the universal lathe segment. Conventional lathes like this are characterized by their robust design and high versatility. The design follows a classic design, but is based on a heavy, one-piece cast machine bed. As with heavy-duty lathes, the power transmission between motor and spindle is also achieved here via a manual lamellar clutch. With integrated functions such as the removable bed bridge, rapid traverse, and a taper turning device, this series offers optional solutions for machining long workpieces or large flanges. One-piece heavy cast bed with high stability Massive headstock with large spindle bearings Rapid traverse in 2 axes for fast positioning Crsdpfx Aijz Irwfsloh Taper turning attachment for additional applications Well-designed safety features You can find more lathes from well-known manufacturers on our website.

Condition: used, Double end profiler, edge processing machine, scoring motor, hogger motor, milling motor, spindle motor -Power: 0.4 kW 12000 rpm at 200 Hz -Voltage: 133 volts -Take-up shaft: Ø 20 mm -Tool: Ø 70 x 20 mm -with indexable milling cutter -Number: 1 piece available -Dimensions: 285/60/H170 mm -Weight: 5kg Csdpfxob A Tcts Ailorh

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Crjdpfxez Ixlvs Ailjh Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm Cjdpfxsb A Tbfo Ailorh -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm Cjdob A Tbdspfx Ailerh -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor Crjdpfob A Tbgox Ailoh -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 480/250/H150 mm -Weight: 36.5 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.5 kW 2900 rpm at 50 Hz -Power: 6.3 kW 5900 rpm at 100 Hz -Voltage: 380 V Crsdpfob A Tbtex Aileh -Acquisition shaft: Ø 38 mm -Tool: Ø 200 x 30-60 mm -Dimensions: 640/150/H250 mm -Weight: 52 kg

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.4 kW 2890 rpm at 50 Hz Crodpfx Aieb A Tbuslsh -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg

Condition: used, Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Manufacturer: Perske, milling motor type KN 71.14/2 with bracket -Power: 3 kW 2880 rpm -Voltage: 380V / 50Hz -Receiving shaft: Ø 30 x 70 mm -Tool: max. Ø 440 mm -Dimensions: 700/570/H480 mm Crodpfepyk Nbox Ailoh -Weight: 100 kg

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Credpfjzmt U Eox Ailjh

Condition: good (used), Working travels 300 x 150 x 355 mm Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH Cjdpfsu Eqixjx Ailorh

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Csdpeb A Nlxsfx Ailsrh -Price: per piece -Weight: 5 kg/piece