Used 40 T Spottingpress Ph4C for sale (80,843)

Condition: good (used), Year of construction: 1997, Well-maintained, used column drill from Alzmetall. Model: Alzstar 40 Nwedpfxsz H T Euj Ag Ien Capacity: 40mm.

Year of construction: 2012, condition: good (used), Derichs Stainless Steel screw conveyor Screw conveyors are used to meter or convey product horizontally up to approximately 7 m or vertically up to 3 m. Depending on the application, either enclosed tubular screw conveyors or trough screw conveyors are used. The advantage of trough screw conveyors is that the trough lids can be opened for cleaning. The bulk material is given into the conveyor through the inlet. There it is conveyed by the screw spirals to the outlet. In the case of dosing and weighing processes, the drive is generally controlled by a frequency converter in order to achieve a coarse and finest flow, which allows a weight-accurate dosing. In order to prevent product trickling at the outlet an optional pneumatically operated outlet flap can be installed. Manufacturer: Derichs Model: FMS-T-400 Year: 2012 Screw Diameter: 400 mm Screw Length: 4.660 mm Power: 5,5 kW / 50Hz Capacity: 80 m3/h Nwsdpfx Ajyc Tt Ueg Ijn Motor Speed: 43U/min Machine Dimensions LxWxH: 5.800x700x530

Condition: used, Year of construction: 1980, mit 50 Platten Plates maximum: 60 Njdpfxsz Sdm Nj Ag Iewn Plate formats: 400x400 Platefilter features: Manual spindl dimension ca. 160x60x100 cm Distance between first plate and spindle approx ca. 120cm

Condition: new, Drilling capacity in St 60 40 mm threading in St 60 M 24 mm threading in GG 20 M 30 bore stroke 120 mm Short spindle MK 3 throat 293 mm column diameter 115 mm Machine table - usable table surface 514 x 360 mm T-Slots Amount - Width - Distance 2 x 14 x 224 mm Distance spindle - machine table min./max. 117 / 701 mm feed 0,10 + 0,20 mm/U spindle turning speed range 160 - 2250 UpM total power requirement 1,45 / 1,9 kW height of the machine 1840 mm weight of the machine ca. 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless Nwodpfx Agogp Dyxe Ien - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection Pos. 25 Coolant device B, consisting of: separate container (33l), Pump with motor protection switch, complete fitting

Condition: excellent (used), Year of construction: 2023, Capacity: Distance between spindle center and guides mm 220 Swinging diameter over bed mm 440 Swinging diameter over cross slide mm 230 Max. turning diameter over bed mm 400 Max. turning length between centers mm 1,000 / 1,500 Bed width mm 330 Headstock: Distance spindle center - bed Nwjdpfoz Ai N Dsx Ag Ijn mm 220 Spindle nose according to standard DIN 55027 Type C6 Spindle bore according to DIN 55027 mm 66 Max. spindle speed rpm 3,500 3-jaw chuck diameter mm 250 3-jaw chuck bore mm 76 Spindle motor power S1 100% / S6 40% / S6 25% kW 10 / 14 / 17 Spindle torque S1 100% / S6 40% / S6 25% Nm 159 / 224 / 272 Tailstock: Travel of quill mm 120 Quill diameter mm 65 Internal taper MT 4 Control: HEIDENHAIN TNC 620 MANUAL PLUS Accuracy: Positioning accuracy mm +/- 0.010 on 1,000 Repeatability mm 0.010 on 1,000 General information: Dimensions (without control panel): L x W x H mm 2,500 x 1,600 x 1,800 Weight kg 2,500 Max. installed power kVa 16

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Nedpfsz D Dnbsx Ag Iswn Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: like new (used), Year of construction: 2019, functionality: fully functional, load capacity: 4,000 kg, Equipment: documentation/manual, Sideros Syncrolift Column Lifting and Rotating Device, 4000 kg load capacity, like new condition. Minimum height: 450 mm Nwsdjyrz Hnjpfx Ag Ijn Maximum height: 1950 mm Travel: 1500 mm Diameter of clamping disc: 800 mm Overall height: 2505 mm Total weight: 1300 kg Torque: 5500 N/m Speed: 0.75 RPM.

Condition: used, CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range -40 to +180°C Temperature deviation ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Nwodpozh Htwofx Ag Ien Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 5,460 h, load capacity: 4,000 kg, lifting height: 3,700 mm, fuel type: gas, mast type: simplex, construction height: 2,640 mm, fork carriage width: 1,400 mm, fork length: 1,100 mm, empty load weight: 6,331 kg, total length: 3,100 mm, drive type: Treibgas, construction width: 1,450 mm, Internal combustion forklift Load center: 500 Fork width: 140 mm Fork thickness: 50 mm Mast type: Standard Transmission: Hydrostatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 250-15 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 250-15 Rear tire condition: 40 - 60% Battery year of manufacture: 2022 Nodpfsz H E E Tox Ag Iewn Double auxiliary hydraulics, Integrated fork positioner with side thrust, Full cabin with heater, Gas tank, Blue Spot, 4x front work lights, 2x rear work lights

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW Nsdpsyq Sv Dsfx Ag Iswn quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel - Horizontal milling spindle - Coolant equipment

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Nwodpfjy Hl Iyox Ag Ien Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours Nwedpfxozf Nn Ee Ag Isn - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: used, CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, hermetically sealed, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, left-hand door stop, one-hand operation, lockable. Insert shelf: stainless steel, support area 970 x 980 + 500 mm load per shelf max. 35 kg total load with max. shelf load 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Plain text error messages RS 232 interface free switching channels for on-site control of the test item Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation and without additional devices. Dimensions: Test volume: 2000 liters Test chamber dimensions: height 900, width 975, depth 2200 mm External dimensions: height 1950, width 1290, depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, non-pressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) Nsdpfx Aozg Twajg Iown We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Complete with: Automatic feed. Variable speed with delay. Lubrication system. Motorized rapid vertical feed for cross slide table. Vise. Drilling capacity in steel: 40 mm diameter. CM 4 spindle connection. Spindle stroke: 145 mm. Cross slide table: 800 x 255 mm. Variable speed with delay: 64-2350 rpm. Motor power: 2.2 kW. Nwodpfszkkm Hsx Ag Ion Power supply: Three-phase, 400 V. Weight: 780 kg.

Condition: good (used), Year of construction: 2010, Used 6-meter CNC drilling machine by CMA Type: TRD 40 CNR 6000 Table length: 6000 mm Table width: 600 mm Max. drilling diameter: 40 mm Flow drill option Nwsdpfx Agezz N T Tj Isn Cooling system Year of manufacture: 2010

Condition: used, Year of construction: 2008, Technical details: Nodpfx As Afhqiog Iewn bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm thread cutting up to max.: Stahl M24 thread cutting up to max.: Guss M30 drill capacity in cast iron: 45 mm spindle taper MT: MK3 spindle speed:: 160-2250 Stepless U/min feed: 0,10 +0,20 automatic mm/U Distance spindle/table max.: 117/701 mm table clamping surface:: 514 x 360 mm column diameter: 115 mm total power requirement: 1,9 kW weight of the machine ca.: 285 kg dimension machine approx.LxWxH: 0,7 x 1,8 x 1,8 m

Condition: used, Year of construction: 2012, 2012 MultiWeigh HDW 20-40-60 TWIN multihead weigher with 20 weigh hoppers – used 20-head multihead weigher in TWIN configuration, built for frozen meat. The MultiWeigh HDW 20-40-60 TWIN is a multihead weigher with twenty weigh hoppers, made by HD-Wiegetechnik in Wetzlar. Thanks to the TWIN configuration the machine can run as two weighers and discharge two portions at once, or use all twenty hoppers for one heavy portion. The range runs from 230 grams to 5 kilos per weighment, with a 5-gram scale interval. The machine was built for frozen meat (product range 0 to -15 °C): dimpled stainless steel contact parts the product does not stick to, a wash-down IP65 build and an IPC controller with colour touchscreen. Built in 2012, complete with dispersion cone, feed pans and accessories. It is in Emmeloord and can be viewed and tested with your product. Key features Nwjdpoz Hqzgjfx Ag Isn - Twenty weigh hoppers in TWIN configuration: two portions at once or one heavy portion - Weighing range 230 grams to 5 kilos, 5-gram scale interval - Built for frozen meat, product range 0 to -15 °C - Dimpled stainless steel contact parts, wash-down (IP65) - IPC controller with colour touchscreen and a programme per product - Complete with dispersion cone, feed pans and accessories Why a TWIN weigher For every weighment a multihead weigher picks the combination of hoppers that comes closest to the target weight. With twenty hoppers the controller has plenty of combinations to choose from, and in TWIN mode the machine splits them over two outlets. One weigher then feeds two packaging machines or two lanes. For large portions you run all twenty hoppers to a single outlet. That makes the machine suitable for small retail packs as well as foodservice portions of up to 5 kilos. Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Multihead weigher, TWIN configuration Condition: Used Number of weigh hoppers: 20 Weighing range: 230 - 5,000 grams Scale interval: 5 g (dw) / 10 g (d), accuracy class X1 Product: Frozen meat, 0 to -15 °C Controls: IPC611-W1200 with colour touchscreen Construction: Stainless steel, dimpled contact parts, IP65 Connection: 400 V, 50 Hz; compressed air 6 bar

Condition: used, Year of construction: 2019, operating hours: 9,580 h, functionality: fully functional, machine/vehicle number: Robot: 4600-109272 / Controller: 4600-109272, overall weight: 570 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm, manufactured in 2019, with 9580 operating hours. Equipped with ABB FlexPendant programming device, connection cable set, and Foundry Plus protection version with “Foundry Plus” marking. Nodpfx Agjzambmo Iewn

Condition: like new (used), Year of construction: 2026, operating hours: 3 h, available immediately: Kaeser ASK 40 T - 11 bar screw compressor with integrated cold dryer with Controller SIGMA CONTROL 3 Nwodeyw Nuropfx Ag Ion Year 2026 Operating hour: 3 h Pressure: 11 bar Nominal power: 22 kW Delivery rate: 3.50 m³ / min Sound level: 69 dB (A) Compressed air outlet: 1 1/4" Dimensions length x width x height: 800 x 1460 x 1530 mm Weight: 620 kg Visit our store. We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Year of construction: 2009, pressure 40.0 t chamfer lenght 1250 mm distance between columns 890 mm work stroke 100 mm dayligth 300 mm column arm 200 mm table width 140 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 90.0 mm/sec tank 63.0 l total power requirement 3.0 kW weight of the machine ca. 2000 kg range L-W-H 1555 x 1075 x 2149 mm from a vocational training workshop very good condition (!) Features: - conventional hydraulic press brake - swiveling control unit (front left) - electric backgauge (X-axis) * incl. digital display for gauge position * movement via electric push-buttons (creep and rapid traverse speeds) - manual adjustment of bending depth (Y1 + Y2 axes) * handwheel with analog position indicator - 2x manually adjustable gauge fingers (R + Z axes) - 1x upper tool - 1x reversible universal die block - pressure gauge / pressure indicator Nodpfxozyvbhe Ag Iown - 1x mobile control unit

Condition: used, Year of construction: 2018, operating hours: 7,490 h, functionality: fully functional, machine/vehicle number: Robot: 4600-107494 / Controller: 4600-107494, overall weight: 538 kg, load capacity: 40 kg, arm reach: 2,550 mm, ABB industrial robot with IRB 4600 manipulator (variant: IRB 4600-40/2.55 Type C) and IRC5 Single controller for industrial automation applications. Condition: used and tested. Typical applications include handling, assembly, machining, and general automation. Payload: 40 kg with a reach of 2550 mm. Year of manufacture: 2018. Operating hours: 7490. Software: RobotWare RW 6.07.01.00. Equipped with an ABB FlexPendant programming device, connection cable set, and a Foundry Plus protective version with a label bearing the inscription “Foundry Plus”. Nedjzamf Sepfx Ag Iown

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,800 kg, total length: 1,900 mm, total width: 1,350 mm, total height: 1,850 mm, power: 4 kW (5.44 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, CNC PRESS BRAKE 40 t × 1320 mm – NEW, 2026 2-axis (Y + X) hydraulic press brake with touchscreen CNC control Compact, accurate hydraulic CNC press brake with 400 kN (40 t) pressing force and a 1320 mm working table. Built for sheet-metal workshops that need repeatable bends, a fast set-up and a small footprint. The machine has passed the manufacturer's final inspection (report dated 9 October 2026, result OK). KEY FEATURES • MTP-3212 touchscreen CNC controller with 2 controlled axes: Y (ram / bending depth) and X (motorised back gauge) • Back gauge with 500 mm travel, 0.1 mm positioning accuracy, driven by a ball screw (Taiwan SHAC) • Repeat positioning accuracy of the ram: 0.1 mm • Rexroth hydraulic system, American hydraulic pump and Parker seals • Siemens main motor, Schneider electrical components • Quick-clamp system for the upper tools, standard punch • Foot pedal with emergency stop SAFETY (CE) • Light curtain protection at the front • Full-size rear door with power-off when opened • Large protective guards on both sides Nwjdeyr N E Espfx Ag Ion • Emergency stop on the control panel and on the foot switch • Electrical cabinet wired to CE standard TECHNICAL DATA • Nominal force: 400 kN (40 t) • Working table length: 1320 mm • Distance between uprights: 950 mm • Throat depth: 200 mm • Ram stroke: 90 mm • Open height: 300 mm • Controlled axes: 2 (Y, X) • Back gauge stroke: 500 mm, accuracy 0.1 mm, max. speed 100 mm/s • Ram speed: rapid 60 mm/s, working 15 mm/s, return 60 mm/s • Main motor: 4 kW • Voltage: 400 V, 3 phase, 50 Hz • Dimensions (L × W × H): approx. 1900 × 1350 × 1850 mm • Weight: 1800 kg (per nameplate) • Year of manufacture: 2026, new machine TERMS Price 8 900 EUR net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and operating manual included. Transport to any European destination – delivery quote on request.

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: Nwsdpfx Agjz Sb Rlo Isn * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Njdpfx Agoz Il Rrs Iown Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: excellent (used), Year of construction: 1976, strip width: 400 - 2.100 mm strip thickness: 0,5 - 3 mm coil weight: 40 t Nwsdeqw Aacepfx Ag Ion coil ID: 508/610 mm