Second-hand machinery for sale (200,000)

Condition: used, Year of construction: 1994, operating hours: 36,170 h, machine/vehicle number: 50557900, power: 260 kW (353.50 HP), operating pressure: 9 bar, DEMAG air compressor including PARKER HIROSS air dryer! TECHNICAL DETAILS Air pressure: 9 bar Air flow rate: 28 m³/min Motor rated power: 260 kW MACHINE DETAILS Electrical voltage: 400 V Electrical frequency: 50 Hz Max. operating temperature: 65 °C Gbjdpfx Aoy Iapnjn Rol Refrigerant: 407C 7.5 kg Operating hours: 36,170 h EQUIPMENT Air dryer PARKER HIROSS POLESTAR SMART Type: PST460 Serial number: 398037030001 Year of manufacture: 2011 Motor power: 6.26 kW Weight: 525 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 5000014, Year of construction: 2008, operating hours: 1,813 h, fuel type: diesel, power: 74.5 kW (101.29 HP), empty load weight: 4,700 kg, TECHNICAL DETAILS Power: 74.5 kW Max. tractive force: 35 kN MACHINE DETAILS Drive: 4x4 Gbedjy Iakxepfx An Rel Engine: Perkins (diesel) Unladen weight: 4,700 kg Operating hours: 1,813 h EQUIPMENT Closed cabin HUSS exhaust filter system Transport/industrial coupling Simple, robust design (low susceptibility to failure)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Godpjy Htgqofx An Rebl Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: ready for operation (used), Year of construction: 2004, operating hours: 61,082 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, controller model: HEIDENHAIN TNC 426, Equipment: chip conveyor, Important information: Auction extended by 14 days. Controller has been subsequently identified as HEIDENHAIN iTNC 530. Previous specification: TNC 426. A new spindle was installed in January 2025! The machine has been regularly maintained! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feeds Rapid traverse: 35,000 mm/min Spindle speed S1 (continuous operation) vertical: 10,000 rpm Spindle speed S1 (continuous operation) universal swivel head 2-axis: 18,000 rpm MACHINE DETAILS CNC control: HEIDENHAIN iTNC 530 Electrical data Supply voltage: 400 V (–15%, +10%) Frequency: 50 Hz Current consumption: 101.1 A Installed total power: 59.8 kW Operating hours Power-on hours: 98,755 h Program run time: 61,082 h EQUIPMENT High-rigidity gantry design Precision linear guides and ball screws Generous workspace with 2.8 m X-axis travel High feed rates for efficient machining Gbjdpfx Aey Dgyfon Rel Ideal for tool, die, and machine building Documentation and acceptance certificate according to ISO standards Tool changer Cooling system Chip conveyor Swiveling milling head with 4th/5th axis

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Max. panel width: 1,200 mm Gsdpfsy R S Afjx An Rebl Max. panel length: 3,000 mm Lifting capacity: 50 kg MACHINE DETAILS Storage length: 30,000 mm Storage width: 5,000 mm EQUIPMENT No specific information provided in the input.

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Max. panel width: 1,200 mm Min. panel width: 250 mm Max. panel length: 5,600 mm Gbsdpfsy R Szzox An Rsl Min. panel length: 500 mm Max. feed speed: 30 m/min MACHINE DETAILS Total installed power: 20 kW EQUIPMENT by means of: motorized roller table

Year of construction: 2007, condition: used, controller model: POWER CONTROL PC21, workpiece length (max.): 5,000 mm, workpiece width (max.): 1,200 mm, The machine comes from a business closure. Inspections under power are possible! TECHNICAL DETAILS Max. panel width: 1,200 mm Max. panel length: 5,000 mm Min. panel length: 500 mm Max. feed speed: 50 m/min Lifting capacity: 100 kg Gsdpfx Ansy R Sydj Rebl MACHINE DETAILS Control: POWER CONTROL PC21 Control system: WINDOWS Dimensions (L x W): 30,000 x 12,000 mm The machine is sold and delivered in its actual and legal condition ('as seen and agreed') on the basis of photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the equipment prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8451

Condition: used, Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, number of slots in tool magazine: 10, controller model: POWER CONTROL PC85, spindle speed (max.): 24,000 rpm, The machine originates from a business closure. Inspections under power are possible! TECHNICAL DETAILS Travel range X-axis: 6,000 mm Travel range Y-axis: 3,000 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 30 m/min Milling spindles: 2 Main electrospindle power: 11 kW Spindle speed: 24,000 rpm Total number of tool changer positions: 10 MACHINE DETAILS Type of operation: Milling Control system: POWER CONTROL PC85 Machine programming software: WOODWOP 5.0 Number of controlled axes: 4 Vacuum cups: 32 Individual vacuum pump capacity: 120 + 80 m³/h Number of pumps: 2 Total installed power: 27 kW EQUIPMENT Vacuum loading Motorized transfer system Automatic panel loading system Automatic panel stacking system Liquid cooling system CE marking Protective structure for operating units with safety sensors Protective netting on the machine Chip conveyor for waste removal The machine is being sold and delivered in its actual and legal condition ("as seen and approved") based on the photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. Gbodpsy R Swisfx An Rsl External reference: 8457

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Max. panel width: 1,200 mm Max. panel length: 5,600 mm Min. panel length: 500 mm Min. panel width: 250 mm Lifting capacity: 100 kg Work capacity: 5/7 cycles/min Max. feed speed: 50 m/min Movement system: suction cups Automatic panel rotation system: yes Number of pumps: 1 Single capacity: 90 m³/h Control system: WINDOWS Machine programming software: POWER CONTROL PC21 MACHINE DETAILS Total installed power: 24 kW Stock dimension length: 12,500 mm Gbedpfxoy R Slyo An Rol Stock dimension width: 6,200 mm EQUIPMENT Vacuum pump Automatic panel rotation system

Condition: used, Year of construction: 2002, travel distance X-axis: 10,500 mm, travel distance Y-axis: 2,700 mm, number of slots in tool magazine: 24, controller model: POWER CONTROL PC83, milling spindle speed (max.): 18,000 rpm, The machine comes from a business closure. Inspection under power is possible! TECHNICAL DETAILS Travel path X-axis: 10,500 mm Travel path Y-axis: 2,700 mm Working area X-axis: 5,600 mm Working area Y-axis: 1,200 mm Speed X-axis: 80 m/min Speed Y-axis: 80 m/min Speed Z-axis: 30 m/min Main electrospindle power: 12 kW Number of milling spindles: 2 Spindle motor output: 12 kW Spindle speed: 18,000 rpm Number of controlled axes: 4 Number of tools in the changer: 24 Number of tool magazine positions: 12 (2 magazines) Maximum panel thickness: 40 mm Minimum panel thickness: 10 mm MACHINE DETAILS Type of machining: Edge processing, Milling Control system: POWER CONTROL PC83 Programming software: WOODWOP 5.0 Total installed power: 51 kW Number of work zones: 1 Number of rails: 5 Number of vacuum cups: 10 Number of vacuum pumps: 2 Capacity per pump: 120 m³/h EQUIPMENT Worktable: Pod and rail Positioning via NC Automatic panel loading system: vacuum loading system Automatic panel stacking system Vacuum pump Liquid cooling system Gluing unit with hot melt pre-melter Edgeband magazine Tool magazine at rear of machine Protective structure for operating units with safety sensors Gbodpfxey R Si Se An Rjl Protective net attached to the machine Safety system: front safety mats Waste chip conveyor The machine is sold and delivered in its current technical and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operating the machine at the destination. External reference: 8458

Condition: used, Year of construction: 2012, total length: 15,000 mm, total width: 12,000 mm, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,250 mm, The machine originates from a business liquidation. Powered inspections are possible! Gbedpfx Ajy R Siron Rsl TECHNICAL DETAILS Max. panel width: 1,250 mm Max. panel length: 5,600 mm Min. panel length: 500 mm Min. panel width: 300 mm Max. feed speed: 60 m/min MACHINE DETAILS Control system: SIMATIC PANEL Dimensions (L x W): 15,000 x 12,000 mm Compatible for edge banding machine with length: 15,000 mm The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection and assumes responsibility for installation, safeguarding, and operation of the machine at the destination. External reference: 8465

Condition: used, Year of construction: 2007, workpiece height (max.): 60 mm, edge thickness (max.): 35 mm, feed rate X-axis: 40 m/min, controller model: POWER CONTROL PC22", Machine comes from a business closure. Inspections under power are possible! TECHNICAL DETAILS Max. feed speed: 40 m/min Max. panel thickness: 60 mm Number of working units: 11 Min. panel height: 16 mm Max. panel height: 50 mm Min. panel width: 85 mm Min. edge thickness: 0.3 mm Max. edge thickness: 35 mm Pressure system: rubber belt Workpiece support guides Positioning via NC Infeed alignment system for panels The machine has the following configuration: PRE-MILLING / MILLING UNITS Number of pre-milling / milling units: 2 Unit 1: Pre-milling unit Motor power: 4.5 kW Speed: 5,860 rpm Automatic time-controlled engagement Unit 2: End trimming unit Motor power: 1.8 kW Automatic tool change GLUING AND EDGE FEED Number of edge rollers: 68 Number of pressure rollers: 14 (1 x 7 + 1 x 7) Lamps for preheating panel edge Premelter for PUR glue Gluing system Glue pot for PUR glue Positioning via NC EDGE PROCESSING UNITS Number of edge processing units: 8 Unit 1: End trimming unit Number of motors: 2 Motor power: 0.22 kW Speed: 10,350 rpm Positioning via NC Gsdpfx Ansy R R T Ns Rsbl Unit 2: Top and bottom flush trimming unit Number of motors: 2 Motor power: 0.55 kW Speed: 11,400 rpm Unit 3: Corner rounding unit Number of motors: 2 Motor power: 0.4 kW Speed: 10,980 rpm Automatic tool change Positioning via NC Automatic time-controlled engagement Unit 4: Scraper unit Positioning via NC Unit 5: Glue joint scraper unit Unit 6: Buffing unit Number of motors: 4 Motor power: 0.25 kW Speed: 1,390 rpm Automatic time-controlled engagement Unit 7: Buffing unit Number of motors: 1 Motor power: 0.30 kW Speed: 3,000 rpm Unit 8: Buffing unit Number of motors: 2 Motor power: 0.18 kW Speed: 1,370 rpm MACHINE DETAILS Control system: WINDOWS XP Machine programming software: POWER CONTROL PC22 The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photographic documentation and descriptive technical/commercial information. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and operation of the machine at the place of destination. External reference: 8453

Year of construction: 2007, condition: used, controller model: POWER CONTROL PC21, workpiece weight (max.): 100 kg, plate length: 1,200 mm, plate width: 5,600 mm, travel speed (max.): 50,000 mm/min, The machine comes from a business closure. Inspections under power are possible! TECHNICAL SPECIFICATIONS Max. panel width: 1,200 mm Max. panel length: 5,600 mm Min. panel length: 500 mm Min. panel width: 250 mm Gbodpfsy R R Tpjx An Rol Max. travel speed: 50 m/min Working capacity: 5 / 7 cycles/min Max. lifting capacity: 100 kg Individual output: 90 m³/h MACHINE DETAILS Control system: WINDOWS Machine programming software: POWER CONTROL PC21 Motion system: Suction cups Total connected load: 28 kW Storage length: 12,000 mm Storage width: 7,000 mm EQUIPMENT Automatic panel rotation system Vacuum pump The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial information of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and utilization of the machine at the destination. External reference: 8456

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Gbedpsy Rx A Sjfx An Rol Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Godjy Rxy Djpfx An Rsbl Throat depth: 220 mm Back gauge depth: 415 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 3098034, travel distance X-axis: 203 mm, travel distance Z-axis: 762 mm, spindle speed (max.): 1,800 rpm, bed width: 445 mm, center width: 900 mm, TECHNICAL DETAILS Swing diameter over bed: 900 mm Centre height: 450 mm Centre distance: 900 mm Bed width: 445 mm X-axis travel: 203 mm Z-axis travel: 762 mm Spindle bore: 60 mm Gbedpfey Rxxmex An Rjl Max. spindle speed: 1,800 rpm MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,600 x 1,950 mm Weight: 2,000 kg Transport packages: 2 pcs EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 610555, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: Fanuc, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 460 mm Travel Z-axis: 510 mm Spindle speed: 60 - 6,000 rpm Tool holder: BT40 Table length: 950 mm Table width: 560 mm Godjy Rxu Uopfx An Rjbl MACHINE DETAILS Control: CNC Control system brand: Fanuc Power: 7.5 kW Number of axes: 3 pcs. Dimensions & Weight Dimensions (L x W x H): 2100 x 2600 x 2600 mm Weight: 3,800 kg Shipping units: 1 pc.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Gedpfx Aoy Rxrysn Robl Probe

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, spindle speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, working width: 2,000 mm, spindle diameter: 105 mm, TECHNICAL DETAILS Swing diameter over bed: 1,050 mm Working width: 2,000 mm Working depth: 1,050 mm Max. workpiece weight: 5,000 kg Spindle diameter: 105 mm Spindle bore: 105 mm Godpfey Rxrtjx An Robl Spindle speed: 2.24–450 rpm Thickness: 105 mm Distance between centers: 2,000 mm Max. workpiece weight: 5,000 kg MACHINE DETAILS Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 mm x 1,900 mm x 1,700 mm Weight: 8,000 kg Control: Conventional EQUIPMENT Four-jaw chuck Steady rest

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 16090455, travel distance X-axis: 850 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 210 mm, table width: 500 mm, table length: 1,570 mm, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 435 mm Z-axis travel: 210 mm Table length: 1,570 mm Table width: 500 mm Main spindle power: 3.8 kW Number of axes: 3 pcs. MACHINE DETAILS Control: CNC Gbjdjy Rxq Aopfx An Rol Control manufacturer: Heidenhain Power: 16.0 kW Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,800 x 2,300 mm Transport weight: 3,500 kg Transport packages: 3 pcs. EQUIPMENT Tools included External cooling Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 750 mm Gbodpfey Rxqvox An Rjl Z-axis travel: 750 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: CNC Power: 22.0 kW Number of axes: 3 Weight: 10,500 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,067 h, functionality: fully functional, machine/vehicle number: 122616, travel distance X-axis: 500 mm, travel distance Y-axis: 95 mm, travel distance Z-axis: 1,650 mm, controller model: OKUMA OSP P200L, center width: 1,500 mm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 95 mm Travel Z-axis: 1,650 mm Turning diameter over bed: 550 mm Power: 22.0 kW Distance between centers: 1,500 mm Spindle bore: 80 mm Counter spindle speed: 4,500 rpm Tool magazine: 44 positions Tool holder: HSK-F63 MACHINE DETAILS Control: OKUMA OSP P200L Dimensions & Weight Dimensions (L x W x H): 5,100 x 2,800 x 2,900 mm Transport weight: 13,700 kg Shipping packages: 7 units Operating hours: 19,067 h EQUIPMENT Automatic workpiece feeder with controlled arm by Pneumotec Automatic bar feeder by LNS Quick Load Servo III Counter spindle VAC-MB11 Milling head with automatic tool changer Gbedpfxoy Rxprs An Rol Turning turret: 12-position tool changer Chip conveyor Turret head Driven tools Bar loader Three-jaw chuck Tool magazine C-axis Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, Equipment: safety light barrier, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Control system: Siemens Sinumerik 840D Laser on hours: 14,434 h Power on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts / scrap Drives: Maintenance-free three-phase servo motors Additional highly dynamic Xp axis Godpfxoy Rk Uys An Rjbl Quick-change cutting head system Laser cutting head with 5" lens and 7.5" lens Programmable cutting gas pressure adjustment APC capacitive height regulation and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting High-speed processing with SprintLAS ContourLAS for production of smaller holes PMS plasma sensing Automatic sheet outer edge detection Programmable power cycles Compressed air cutting PCS Process Control System Microweld Spray device for safe thick sheet processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open PC-based control, simple operation, online help, integrated E-Shop, diagnostic function, maintenance logbook, technology data, teleservice Safety equipment: Multi-beam light curtains, completely enclosed and ventilated beam guidance, monitoring system, multi-chamber extraction and compact deduster, protective cabin

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 15 mm Sheet thickness copper: 4 mm Sheet thickness brass: 3 mm Laser power: 3,000 W Laser model: TruDisk3001 (4C) MACHINE DETAILS Control type: CNC Last documented maintenance: 10-12 Sept 2025 Operating hours (as of 09/2025): 53,082 h (currently approx. 54,000 h) Dimensions & Weight Space requirement: 9,300 x 4,700 x 2,200 mm Machine weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction system Operating manual Chiller + extraction system Godsy Rkz Hjpfx An Rsbl Compressor not included Note: Transporting the machine requires 1 standard truck and 1 truck with a width of 3m.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, controller model: Siemens 840D, laser type: fiber laser, laser power: 2,000 W, sheet thickness (max.): 8 mm, overall weight: 20,000 kg, No reserve – guaranteed sale to the highest bidder! DURMA laser cutting system – fully equipped! TECHNICAL DETAILS Maximum sheet thickness: 8 mm Maximum steel sheet thickness: 8 mm Maximum stainless steel sheet thickness: 4 mm Maximum aluminum sheet thickness: 6 mm Maximum tube diameter: 170 mm Maximum tube length: 6,500 mm Maximum round tube diameter: 170 mm Maximum square profile: 120 x 120 mm Maximum rectangular tube: 150 x 100 mm Minimum tube diameter (automatic): 20 mm Minimum tube diameter (manual): 12 mm Minimum processable tube length: 185 mm Minimum processable wall thickness: 0.8 mm Maximum processable wall thickness (mild steel, 2 kW laser): 8 mm Maximum processable wall thickness (stainless steel, 2 kW laser): 4 mm Maximum processable wall thickness (AlMg3, 2 kW laser): 6 mm Repeatability: 0.05 mm Maximum profile length: 6,500 mm Minimum profile length for automatic loading: 3,000 mm Standard discharge length: 4,000 mm Maximum profile weight: 37.5 kg/m Maximum loading capacity: 3,000 kg Possible loadable profiles: round, square, rectangular, elliptical MACHINE DETAILS Laser type: Fiber laser Laser source manufacturer: IPG Laser power: 2,000 W Power: 2 kW (2.72 HP) Gbedpfey N Rqrex An Rsl Control system model: Siemens 840D Automation level: Automatic Actuation type: Electric Dimensions & Weight Dimensions (L x W x H): approx. 16,000 x 7,400 x 2,364 mm Weight: approx. 20,000 kg EQUIPMENT CE marking Documentation/manual Cooling unit Emergency stop switch Fume extraction Safety light curtain Central lubrication system Precitec Autofocus Procutter cutting head F 150 (Focus) Control cabinet air conditioning Manual loading Manual unloading Laser positioning diode Central lubrication unit Small parts disposal box Illuminated cutting chamber IPG laser source 2 kW Vanterm compact filter unit Automatic loading system (6,500 mm) Unloading unit (6,000 mm) Discharge conveyor, inc. small parts conveyor (rear discharge) Automatic cut seam detection Automatic real-time measurement system for centering chuck Calcium carbonate dosing unit