Metal part spray washer

Magido / Glogar L90

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system, type L90 Hnodpfx Ashgh I Sonder Automatically operating hot water parts washing machine with automatic basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system (from below, from the side, and from above) with stainless steel nozzles. - Basket diameter: 790 mm - Usable height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (RT - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable via Omron timer (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Preparation for later installation of an oil separator The parts washing machine is in new condition and has never been used. OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. Hnsdpfxefbt Sie Andjr including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. Hnedpfx Aeuy H Nqendsr With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Hsdpfx Aneuxuv Ajdenr

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Hedpfxjg Ix Hme Andsnr

Condition: used, Year of construction: 2014, turning diameter 320 mm turning length 510 mm control i Serie Fanuc swing diameter over bed slide 250 mm spindle turning speed - stepless 6000 U/min Hsdpfxszl E Rio Andonr spindle bore 65 mm power capacity 15 kW total power requirement 20 kW weight of the machine ca. 3.5 t dimensions of the machine ca. 2,59 x 1,6 x 1,7 m Machine has chip conveyor and Tail stock. It has C- axe and live tooling. Control: Fanuc i series

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Hnjdpfshl H Ubsx Andjr

Condition: new, Technical data: Working length: 1020 mm Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Hnodpect Rzbefx Ander Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW Dishwasher NEW NEW Stainless steel design with LCD display High-performance and versatile dishwasher 2, 3, and 5-minute wash cycles 1 plate rack, 1 universal rack, and cutlery insert Capacity: approx. 30 racks/hour / 540 plates Dishwasher with drain pump Detergent and rinse aid dispenser Only available from us, DGUV V3 certified Connection: 400V, 16A-CEE plug Dimensions: 600 x 600 x 820 - 850 mm, WxDxH NEW machine Hnsdpfsvdkuhsx Andor with warranty + spare parts service More great dishwashers in stock!

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed Hnjdpfx Anotr U Hlsdor → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg