Bobst SPO1600 with Flexo1600 Printer-3C

Year of construction

1979

Condition

Used (fully functional)

Location

Breitscheid Germany

No images have been published yet.

Show map

Machine data

Machine type:: Bobst SPO1600 with Flexo1600 Printer-3C

Machine number:: 0214 002 03 (demnach Serie 2) - FLEXO 1600 u. 0663 008 09 (Stanze,demnach Serie 6)

Year of construction:: 1979

Condition:: ready for operation (used)

Functionality:: fully functional

Price & Location

Location:: Am Bahnhof 1-3, 35767 Breitscheid, Deutschland

Call

Details about the offer

Listing ID:: A21477782

Update:: 11.03.2026

Description

ATTENTION: IMAGES IN PDF ATTACHMENT

The machine was in two-shift operation without problems until the end of 2025. It is still located at the plant and can be put into operation immediately. It was regularly inspected by external specialist companies, and recommended maintenance was carried out annually.

Most recently, the chains of the SPO were replaced, as well as new anilox rollers and rubber rollers installed; 2 anilox rollers were overhauled (not installed). The machine has been repeatedly upgraded with PIPs (e.g., Centerline II), and both the flexo unit and the die-cutter unit have been converted to frequency-controlled drives. Both feeders are supplied by a single vacuum pump; an overhauled claw vacuum pump is also available. Maintenance and general repairs were carried out by the facility’s own maintenance team (see also spare parts stock).

The machine should be able to be powered up and test run without any further preparations.

A very extensive stock of unused original spare parts can be purchased as well, along with refurbished spare parts and accessories – ensuring long-term operability and functionality!
Dcjdpfx Akoytrp Ajceg

Flexo unit = Year of manufacture 1977, Die-cutter unit = Year of manufacture 1979

Available following decommissioning from a medium-sized packaging plant – manufacturer: WP – packaging with multi-color printing and gluing capabilities

Availability of further equipment (e.g., FKM, water treatment for flexo inks, as-new Kaeser compressed air system/4 compressors, etc.)

Inspection with functional testing on site possible at short notice (near Herborn/A45)

The listing was translated automatically. Translation errors are possible.

Documents

21477782-01.pdf
21477782-02.pdf

Seller

Registered since: 2025

2 listings online

Call

Send inquiry

Telephone & Fax

+49 2777 ... show

These listings may also fit your interest.

Auction

CNC turning and milling center Gildemeister CTX 510

Nordrhein-Westfalen

18,525 km

CNC turning and milling center
GildemeisterCTX 510

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,050 mm, turning diameter: 465 mm, travel distance X-axis: 300 mm, chuck outer diameter: 325 mm, controller model: Fanuk Series 21I-TB, TECHNICAL DETAILS Max. turning length: 1,050 mm Turning diameter over cross slide: 350 mm Max. turning diameter: 465 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm Max. spindle speed: 3,500 rpm Max. torque: 630 Nm Spindle bearing diameter: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Quill stroke: 150 mm Rapid traverse X/Z axis: 30 m/min Number of tool turret positions: 12 Tool holder: VDI 40 MACHINE DETAILS Control: Fanuk Series 21I-TB Drive power: 33 kW Dcsdpfxjy Hg S Hj Akcjg

See details

Listing

Channel Bailing Press PAAL PACOMAT V 50ton 500kg bale

Tata

18,035 km

Channel Bailing Press
PAAL PACOMAT V50ton 500kg bale

€13,900

Fixed price plus VAT

Call

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Dcedpoic Rl Djfx Akcjg Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

See details

Auction

Vertical machining center POSMill C 800 Kompakt

Baden-Württemberg

18,641 km

Vertical machining center
POSMillC 800 Kompakt

€24,000

To the auction

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer. Dcedpfxsy E Hqte Akceg

See details

Auction

Hydraulic press for rubber and EVA foams MAPELLI T 1000

Greece

17,682 km

Hydraulic press for rubber and EVA foams
MAPELLIT 1000

€9,000

To the auction

Condition: ready for operation (used), Year of construction: 1983, operating hours: 50,000 h, functionality: fully functional, operating pressure: 200 bar, overall weight: 33,000 kg, pressing force: 1,000 t, stroke length: 650 mm, travel speed (max.): 3,600 mm/min, TECHNICAL DETAILS Pressing force: 1,000 t Clamping force of the core plates: 30 t Travel speed: approx. 60 mm/s Operating pressure: 200 bar Stroke of the movable plate: 650 mm Stroke of the mold holder plate (towards operator): 980 mm Heating Plates and Heating System Heating plate size: 1,000 mm x 1,000 mm Number of heating plates: 7 Number of openings: 6 Opening dimension per opening: approx. 108 mm Specific pressure on plates: 100 kg/cm² Hydraulics and Power Units Hydraulic pump power: 9 kW Oil dynamic pump power: 11 kW Installed electrical power: 21.5 kW Hydraulic oil capacity: approx. 160 l Operating Fluids Amount of hydraulic fluid emulsified with water and 5% CIL-SOLIOIL-BK oil: approx. 1,300 l Nitrogen bottles (each 60 l at 200 atm) for accumulator pre-charging: approx. 10 MACHINE DETAILS Weights Weight of the press: 33 t Weight of hydraulic power unit: 0.4 t Weight of pump and accumulator: 1.9 t Weight of electrical unit: 0.2 t Total delivery weight: 35.5 t Dcjdpfx Ajy Hhqdjkcsg FEATURES Heating system with saturated steam Electrohydraulic power control device Electrovalve air venting system

See details

Listing

Gusselby

17,521 km

Air Compressor
Atlas CopcoGA-37

Call

Auction

CNC turning and milling center MORI SEIKI NT 4200/1000S

Schleswig-Holstein

18,208 km

CNC turning and milling center
MORI SEIKINT 4200/1000S

€30,000

To the auction

Condition: ready for operation (used), Year of construction: 2006, operating hours: 16,093 h, functionality: fully functional, turning length: 1,000 mm, spindle speed (max.): 5,000 rpm, controller model: MITSUBISHI M-720BM (MAPPS 2), counter spindle speed (max.): 5,000 rpm, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Turning length: 1,000 mm Main Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Counter Spindle Max. spindle speed: 5,000 rpm Drive power: 22/15 kW Spindle bore: 73 mm Milling spindle speed: 0 - 12,000 rpm Tool holder: Capto C6 Tool stations: 100 positions Hollow clamping device: 67 mm Dcedpfxsy Eydyo Akceg MACHINE DETAILS Control unit: MITSUBISHI M-720BM (MAPPS 2) Operating Hours Operating hours: 26,875 h Spindle hours: 16,093 h EQUIPMENT Y-axis Fully indexable B-axis Chip conveyor, discharge right Standard coolant system Interface for high-pressure coolant system, 70 bar Tool spindle with through-spindle cooling Coolant spray gun Blow air through sub spindle Manual tool presetting on main spindle 3-color signal tower Double foot switch Simultaneous 5-axis machining Automatic power off Tool offset for 5-axis machining Programmable data input Dynamic interchange diameter/radius Stroke check prior to movement

See details

Auction

Multi-component injection moulding machines ENGEL VICTORY 1350H500V/220 Combi

Wien

18,157 km

Multi-component injection moulding machines
ENGELVICTORY 1350H500V/220 Combi

€12,000

To the auction

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 t Screw diameter: 55 mm + 40 mm Djdoy Exdxjpfx Akcjcg Maximum injection volume: 618 cm³ + 251 cm³ MACHINE DETAILS Mounting platen: 960 x 830 mm Minimum mold installation height: 320 mm Maximum mold installation height: 730 mm EQUIPMENT EC100/A03 Note: When purchasing multiple items from the same location (see offers below), you will benefit from reduced costs for disassembly and loading.

See details

Listing

Kosorowice

17,950 km

Bale press
HSMVK 42 Automat

€11,000

Fixed price plus VAT

Call

Auction

Multi-material injection molding machine KraussMaffei KM200-1000-390 CZ

Wien

18,157 km

Multi-material injection molding machine
KraussMaffeiKM200-1000-390 CZ

€6,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 200 t Tie bar spacing: 560 x 560 mm Dcjdpey Exdljfx Akcog Screw diameter (first component): 60 mm Screw diameter (second component): 35 mm Shot weight (first component): 566 g Shot weight (second component): 178 g EQUIPMENT Two-component system Kraussmaffei Multinject system Note: When purchasing multiple items from the same location (see listings below), the lower costs for dismantling and loading will be waived.

See details

Auction

Multi-material injection molding machine ENGEL ES 330H80V/125 HL .2F

Wien

18,157 km

Multi-material injection molding machine
ENGELES 330H80V/125 HL .2F

€6,500

To the auction

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, clamping force: 1,225 kN, controller model: CC100, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 125 t Horizontal cylinder: 35 Vertical cylinder: 18 MACHINE DETAILS Control: CC100 EQUIPMENT 1x hydraulic core pull BAP 1x proportional hydraulic interface for index plate BAP 16x heating zones (HK) 2x magnetic clamping plates for BAP and FAP Dedpfxey Exc Is Akcscg Note: When purchasing multiple items from the same location (see offers below), you will benefit from the lowest costs for dismantling and loading.

See details

Listing

Baler for waste paper and film DIXI 60 automat

Tarnów Opolski

17,950 km

Baler for waste paper and film
DIXI60 automat

€22,000

Fixed price plus VAT

Call

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Dsdpsv Amw Nsfx Akcjcg Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg

See details

Auction

Multi-material injection molding machine ENGEL ES 650W500V/200HL. 2F

Wien

18,157 km

Multi-material injection molding machine
ENGELES 650W500V/200HL. 2F

€7,900

To the auction

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, screw diameter: 45 mm, clamping force: 2,000 kN, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nClamping unit: 2,000 kN\n\nScrew diameter unit 1: 45 mm\nScrew diameter unit 2: 45 mm\n\nMax. shot volume unit 1: 226 cm³\nMax. shot volume unit 2: 183 cm³\n\nMACHINE DETAILS\n\nMinimum mould installation size: 250 mm\nMaximum mould installation size: 750 mm\n\nEQUIPMENT\n2-component machine\nTie-bar-less design\n\nNote: When purchasing multiple items from the same location (see offers below), you will benefit from the most favourable disassembly and loading costs for each item. Dcsdpsy Exatsfx Akcjg

See details

Auction

Injection molding machine ENGEL Victory 330/125 Tech

Wien

18,157 km

Injection molding machine
ENGELVictory 330/125 Tech

€9,300

To the auction

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! Dcjdpfjy Exagjx Akceg TECHNICAL DETAILS Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

See details

Listing

Kraków

17,851 km

Bale press
COMDEC - PAALLV2020PFT

€3,900

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm Dcodpfxjt Ucqfo Akcog The press was in operation until the production line was shut down.

See details

Auction

Injection molding machine ENGEL ES 1800/300HL-V

Wien

18,157 km

Injection molding machine
ENGELES 1800/300HL-V

€14,000

To the auction

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! Dodpfsy Ew U Asx Akcocg TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived.

See details

Advertise here