50,000 L vertical PE (polyethylene) plastic tank

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 Bsdpfeycp Nlox Abbjwh MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: used, Year of construction: 2014, functionality: fully functional, Beer bottling line Speed: 2,000 Bph Line composed of: BORELLI monoblock Year: 2014 Direction of travel: clockwise 12-pincer rinser Nozzle type: fixed Number of treatments: water and inert gas 16-valve filler Filling type: isobaric Pre-evacuation Degassing Single-head capper for crown cap Cap size: 26 mm TEKNINOX pasteurization tunnel Year: 2014 Pasteurization temperatures: pre-pasteurization and pasteurization managed by PLC ENOS labeler Year: 2014 Type of labels: linear with 2 stations Type of applications: Label and Back label on the same reel Collar Bodpev Hrcxofx Abbewh Close SIAT cartons Year: 2014 Belt type both above and below PARMAMET clusterer Year: 2007 Format: 33x3 Accident prevention guards BELTS NOT INCLUDED Code: NP 578

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Bsdpfx Asycp Ihobbswh Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, working width: 450 mm, Equipment: safety light barrier, TECHNICAL DETAILS Working width: 450 mm (limited processing up to 520 mm possible) EQUIPMENT - Safety light barrier - Saw - Universal milling unit with roller cutter - Dovetail cutter - Finger joint cutter - Drilling units: 1x horizontal + 2x vertical - Slotting device - Marker on stop side - Automatic beam turning station - Wood length is now processed in the feed up to 16m Bedpfx Aeyfhi Nsbbowh - Control computer with EKP program included

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 35/1997, Beer pasteurizer - Heat exchanger Manufacturer APV TYPE / Year 35 / 1997 Capacity 8000 Kg /h Working Pressure 16 bar Max working temp 95 *C Bwodpfxoquuxue Abbjh

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0179 (033), turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, clamping diameter: 32 mm, workpiece length (max.): 150 mm, The machine is supplied with tool holders and spare parts. TECHNICAL DETAILS Swing diameter over bed: 32 mm Spindle bore: 32 mm Turning length: 125 mm Control: YASKAWA SIEMENS 840 DI V2 Spindle speeds: 7000 rpm Workpiece length: max. 150 mm Clamping diameter: 32 mm Feed rate: 0 - 2000 mm/min MACHINE DETAILS Bwjdpfxex U Tche Abboh Machine weight: approx. 5.7 t Space requirements: approx. 10.5 x 2 x 1.9 m Connection voltage: 200 V, 3 phases Frequency: 50 / 60 Hz Connected load: 8.0 kVA

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 89N1160, cutting width (max.): 800 mm, insertion depth: 800 mm, overall weight: 900 kg, reverse speed: 70 mm/s, TECHNICAL DETAILS Cutting width: 800 mm Insertion depth: 800 mm Maximum operating height: 100 mm Pressing force: 180–2,700 daN Minimum cut without cover plate: 15 mm Minimum cut with cover plate: 50 mm Return speed: 70 mm/s MACHINE DETAILS Power consumption: 4.0 kVA Power supply: 400 V, 50 Hz, 2.6 A Control: 18.5" touchscreen Program memory: 1,998 jobs Total cuts: 24,551 Weight: 900 kg Bwodpfx Aeycr Ikebboh Table: Stainless steel with air support EQUIPMENT 1× mounted POLAR 78 1× new POLAR 78 SKH-2, 960×110×11.7 mm Process visualization Hydraulic swinging angled cut LED cutting line indicator Air table Robust machine body Ultra-fast knife change with POLAR OptiKnife New spare knife

Condition: used, Year of construction: 2018, operating hours: 3,450 h, Equipment: all wheel drive, New Arrival Liebherr L 538 Z 2plus1 Z-Lifting Frame Serviced by Liebherr at 499 operating hours on 06.09.2019 * All further services also carried out by Liebherr according to service schedule * Up to 3511 hours as of 17.03.2025 Original paintwork Chassis No.: VATZ1559PZB052421 Year of manufacture: 2018 Operating hours: approx. 3540 Lifting frame with Z-kinematics – earthmoving version 4-cylinder inline engine, 111 kW / 151 HP, water-cooled with turbocharger, Emission Stage 4 Machine width: 2500 mm Hydrostatic drive with 3-speed transmission Special equipment: * Ride control BSS – lifting frame damping * Central lubrication system, factory-installed by Liebherr * Automatic climate control (maintains preset temperature automatically) * Access aid in front of windshield for easier cleaning of the front window * Air filter with pre-separator “TopSpin” for pre-cleaning intake air * Premium touchscreen display * Comfort safety door, opening to 180 degrees * "Comfort" driver's seat with pneumatic suspension and seat heating * Adjustable steering column * Comfort radio with hands-free function * Steel lamp carrier for front headlights instead of plastic * 4 LED work lights on the rear of the cab roof * 4 LED work lights on the front of the cab roof * Tyres: 20.5 x 25 L3 front axle: 2 x 50% * Tyres: 20.5 x 25 L3 rear axle: 2 x 50% Automatic self-locking differentials, 45% locking value on both axles Optional equipment available at extra cost: - 4-in-1 bucket (grapple & levelling bucket) 2 m³ €3,950 - High-volume bucket 5 m³ €3,990 - Bucket with clamp from 2.0 m³ up to 3.5 m³ €3,660 - High-tip bucket from 2.5 to 5.5 m³ from €5,990 Bedpoyamgisfx Abbswh - Pallet fork 5 tons from €2,190 Weighing system * Pfreundt WK 60 for this machine €3,990 * 24 V printer for weighing system €1,260 All prices net plus VAT or for export Sale only to businesses or for export. Sold as-is as per current condition. No warranty or guarantee. The stated mileage and operating hours are based on odometer/hour meter readings; accuracy and completeness cannot be guaranteed! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided does not represent guaranteed characteristics. The descriptions and information serve only for general identification of the machine and do not represent warranty in the legal sense. The information is not guaranteed to be complete. All details/descriptions and images are non-binding and do not constitute guaranteed properties. Only the details in the order confirmation and invoice are binding. The seller offers no liability/warranty. The advertisement may contain typographical and data transmission errors. The seller has not inspected the machine. Equipment should be verified separately if necessary. We are happy to take your vehicle in part exchange. For further questions, please do not hesitate to contact us. For our international customers, we provide all customs and export documentation for trouble-free export.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: FW907009F, load capacity: 70 kg, arm reach: 2,050 mm, controller model: CR760-70VD1-1-S15, repeat accuracy: 0.07 mm, operating speed: 13,000 mm/s, TECHNICAL DETAILS Payload: 70 kg Maximum reach: 2,050 mm Repeatability: ±0.07 mm Protection class: IP67 Bjdoycq Hxopfx Abbjwh Speed: 13,000 mm/s Working ranges J1 (rotational axis): 330° J2 (tilting axis): 215° J3 (arm axis): 261° J4 (wrist rotation axis): 720° J5 (wrist tilting axis): 250° J6 (wrist rotation axis): 900° MACHINE DETAILS Power consumption: 20,000 VA Power supply: 3-phase, 180-253 VAC Controller (CE version): CR760-70VD1-1-S15 Hand controller (Teaching box): R56TB (new) Dimensions & Weight Dimensions (L x W x H): 1,955 x 648 x 1,852 mm Width: 648 mm Height: 1,852 mm Robot weight: 640 kg Controller weight: 200 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Bodpfxsya Dh Rs Abbjwh Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 60.000 Liters Diameter: ca. 2.500 mm Length: ca. 12.680 mm Weight: ca. 10.700 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe Bwsdpfxehui Efs Abboh • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 133, TECHNICAL DETAILS Spindle speed: 14,000 rpm Coolant supply through the spindle: 70 bar MACHINE DETAILS Year of manufacture: 2023 EQUIPMENT Bedpfxoyarhro Abbewh Direct tapping Tool magazine with 133 storage positions Pallet changer Two pallets with tapped hole grid Eight adjustable rinse nozzles at the spindle Flow monitor for coolant through the spindle Cooling system with chip conveyor BSW880 Interface for mist extraction Visual tool breakage monitoring BTS Toolholder HSK-A63 Coolant temperature control unit Direct measuring systems (glass scales) for X, Y, Z axes Three-axis workpiece probe (Marposs Mida T25G) Double-layer cooling system (BDW 880) Automatic central lubrication Programmable axis mirroring Tool offset storage with 400 memory slots 54 (6+48) freely selectable workpiece coordinate systems Three-color signal lamp

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Bjdpfoyap Shjx Abbswh Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS X-axis travel: max. 840 mm Z-axis travel: max. 425 mm Feed diameter: max. 200 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Bwsdpsyap Nasfx Abbeh Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Cooling: spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers