Euro-Pool mesh box flat 120 x 80 cm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 1,500 mm, controller model: Heidenhain 530, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 1,270 mm Z-axis travel: 1,500 mm Spindle speed: up to 4,000 rpm Tool holder: SK50 MACHINE DETAILS Control: Heidenhain 530 Internal cooling: 22 bar EQUIPMENT Csdpfx Aasymcu Ae Ejgp Diagonal milling head with 2.5 x 2.5 indexing Longitudinal chip conveyor

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m Cgedpsvpaa Refx Aa Esp

Condition: ready for operation (used), Year of construction: 2009, operating hours: 27,745 h, functionality: fully functional, machine/vehicle number: NT320110134, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The offer includes a comprehensive tool package (see attachment; an Excel table can be provided on request)! An inspection checklist for 2025 is also included. TECHNICAL DETAILS Maximum workpiece swing diameter: 600 mm Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum machining diameter at tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Axes X-axis tool spindle: 685 mm Y-axis tool spindle: ±125 mm Z-axis tool spindle: 1,075 mm B-axis swivel range: ±120° X-axis turret 2: 130 mm Z-axis turret 2: 970 mm Main spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Codeyml Eqjpfx Aa Ejgp Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Counter spindle Maximum speed: 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Inner bearing diameter: 120 mm Tool spindle (Turret 1) Maximum speed: 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating Hours Power-on hours: 131,963 h Operating hours: 68,391 h Spindle hours: 27,745 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 29,709 h, functionality: fully functional, machine/vehicle number: NT320GE0052, turning length: 1,045 mm, turning diameter: 600 mm, travel distance X-axis: 685 mm, travel distance Y-axis: 125 mm, travel distance Z-axis: 1,075 mm, The machine's tool spindle was replaced in 2022! The offer includes a comprehensive tooling package (see attachment; an Excel tool list can be provided upon request)! TECHNICAL DETAILS Cgedpfoymlvvsx Aa Eep Maximum workpiece swing diameter: 600 mm Swing diameter over cross slide: 600 mm Maximum distance between centers: 1,255 mm Maximum turning diameter with tool spindle: 600 mm Maximum turning length: 1,045 mm Bar capacity: 65 mm Travel paths X-axis (tool spindle): 685 mm Y-axis (tool spindle): ±125 mm Z-axis (tool spindle): 1,075 mm B-axis (swivel range): ±120° X-axis (turret 2): 130 mm Z-axis (turret 2): 970 mm Main spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Counter spindle Speed: max. 5,000 rpm Gear stages: 2 Spindle nose: JIS A2-6 Spindle bore: 73 mm Indexing: min. 0.0001° Bearing inner diameter: 120 mm Milling spindle (turret 1) Speed: max. 12,000 rpm Maximum tool length: 200 mm Maximum tool weight: 4 kg Tool change time: 1.25 s MACHINE DETAILS Dimensions (L x W x H): 3,765 x 2,966 x 2,765 mm Weight: 15,800 kg Operating hours Power-on hours: 138,593 h Operating hours: 66,865 h Spindle hours: 29,709 h

Condition: new, Year of construction: 2022, operating hours: 1 h, machine/vehicle number: 268955558, GREMAC e1 trommel screen Tandem chassis / axles 2x kg ( permissible total weight) kg empty weight without aggregate Overrun brake Vehicle lighting according to StVzO TÜV acceptance Drum length: mm Diameter: mm Cjdpfjl Hbcfex Aa Eogp 4,0 kW electric drive speed adjustable with frequency converter driving screw adjustable cleaning brush hopper with conveyor belt rubber belt with chevron profile 0,75 kW electric drive speed adjustable with frequency converter Fine grain collecting belt Movable suspension Rubber belt in smooth design 1,5 kW electric drive Speed adjustable with frequency converter Fine grain belt Movable suspension Rubber belt with chevron profile 2,2 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Over-grain stockpile conveyor Movable suspension Rubber belt with chevron profile 1,5 kW electric drive Speed adjustable with frequency converter 25 angles of inclination Manual winch for angle adjustment Control system PLC Siemens Logo Control panel with buttons and potentiometers 400V load circuit 24V control circuit Main switch Ceekon 16A socket EMERGENCY OFF relay Without generator Cladding Hot galvanized frame parts painted drum cladding powder coated in RAL7005 and 5018 Further information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good, Delivery conditions: EXW,

Condition: like new (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, paper width (min.): 130 mm, paper width (max.): 780 mm, paper height (min.): 6 mm, paper height (max.): 1 mm, production capacity: 8,000 unit/h, Machine in nearly new condition with only 50 operating hours! TECHNICAL DETAILS Maximum paper size: 950 x 780 mm Cgedpfx Aeyl U A Asa Esp Minimum paper size: 150 x 130 mm Maximum window size: 380 x 300 mm Minimum window size: 50 x 50 mm Paper thickness: 1 - 6 mm Speed: 8,000 pcs/h MACHINE DETAILS Input voltage: 380 V Operating hours: 50h Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,750 x 1,700 mm Total weight: 3,200 kg FEATURES Processing of standard and corner windows Precise positioning with automatic centering system High degree of automation User-friendly control with touchscreen Robust construction

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, turning length: 2,000 mm, spindle speed (max.): 1,000 rpm, travel distance Z-axis: 2,000 mm, overall weight: 40,000 kg, turning diameter over bed slide: 1,270 mm, controller model: Fanuc Serie 18i-TB, TECHNICAL DETAILS Turning length: 2,000 mm Swing diameter over bed: 1,550 mm Swing diameter over cross slide: 1,270 mm Spindle speed: 1,000 rpm Spindle diameter at front bearing: 240 mm Spindle bore: 185 mm Spindle power: 37/30 kW Bar capacity: 165 mm Travel in longitudinal direction (Z-axis): 2,000 mm Cross travel: 685 mm Cgodpoylwl Tefx Aa Ejp Rapid traverse speed X-axis: 10 m/min Rapid traverse speed Z-axis: 12 m/min MACHINE DETAILS CNC control: Fanuc Series 18i-TB Dimensions & Weight Dimensions (L x W x H): 9,800 x 3,695 x 5,292 mm Machine weight: approx. 40 t EQUIPMENT 12-position turret

Condition: used, Year of construction: 2023, operating hours: 248 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tyres (front): 600/70 R30, Tyres (rear): 710/70 R42, Operating hours: 248, First registration: 17.12.2024 _____ Standard equipment/technical data ENGINE Max. power 180/245 kW/HP (ISO 14396) Max. torque 1100 Nm Maximum power with power boost 194/265 kW/HP Max. torque with power boost 1178 Nm 6-cylinder, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without EGR, Stage V Electronic engine management with Vistronic fan control Engine speed memory Powercore engine air filter with pre-cleaner EasyCare cooling package Additional fuel pre-filter with water separator 500-litre fuel tank Cgsdpevv Dp Nefx Aa Ejp

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2338, travel distance X-axis: 6,700 mm, travel distance Y-axis: 2,090 mm, travel distance Z-axis: 70 mm, table width: 2,160 mm, table height: 915 mm, table length: 7,340 mm, TECHNICAL DETAILS X-axis travel: 6,700 mm Y-axis travel: 2,090 mm Z-axis travel: 70 mm Main drive: 1 x HSD Main drive power: 6.6 kW / 8.9 HP Max. main spindle speed: 24,000 rpm Cgjdpfxjylk Hde Aa Eop Secondary drives: 2 x ELTE Secondary drive power: 3.7 kW / 5 HP Max. secondary spindle speed: 24,000 rpm Table width: 2,160 mm Table length: 7,340 mm Table height: 915 mm Number of milling heads: 3 EQUIPMENT Vacuum pump: BUSCH MINK Manuals Integrated software

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, resolution (max.): 2,400 dpi, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (max.): 487 mm, No reserve price – guaranteed sale to the highest bidder! Original purchase price of the printer was €486,000 (net)! TECHNICAL DETAILS Cgedpfsymwzdsx Aa Eep Print resolution: 2,400 × 2,400 dpi Print speed: 100 images per minute Recommended monthly print volume: 100,000 – 450,000 pages Maximum monthly duty cycle: 1,500,000 pages Supported paper sizes (min.): 182 × 182 mm Supported paper sizes (max.): 330.2 × 487.7 mm Paper weight range: 60 g/m² up to 350 g/m² Paper weight range (validated): up to 400 g/m² Duplex printing media weight: 350 g/m² MACHINE DETAILS Standard paper feed capacity: 1,000 sheets Total capacity expandable up to: 10,000 sheets Main unit dimensions C10000 (H x W x D): 145.5 cm x 258.6 cm x 115.3 cm FEATURES Offset-like quality Supports specialty and textured media In-line sensors for color management Automatic calibration

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension Cjdpsga T Exefx Aa Ejgp

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7F001-7, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, No reserve price – guaranteed sale to the highest bidder! According to the manufacturer, the year of manufacture is likely 2015. TECHNICAL DETAILS Measuring range X-axis: 300 mm Measuring range Y-axis: 200 mm Measuring range Z-axis: 150 mm Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Maximum traverse speed X, Y, Z-axis: 160 mm/s Measuring accuracy of optical sensor X, Y-axis: Ex, Ey = (1.6 + L/250) µm Measuring accuracy of optical sensor XY-axis: Exy = (2.0 + L/250) µm Measuring accuracy of optical sensor Z-axis: Ez = (3.9 + L/200) µm Measuring accuracy of touch-trigger probe X, Y-axis: Ex, Ey = (2.0 + L/250) µm Measuring accuracy of touch-trigger probe XY-axis: Exy = (2.5 + L/250) µm Measuring accuracy of touch-trigger probe Z-axis: Ez = (2.9 + L/200) µm Measuring volume, optical sensor X: 300 mm Measuring volume, optical sensor Y: 200 mm Measuring volume, optical sensor Z: 150 mm Measuring volume, tactile sensor X: 230 mm Measuring volume, tactile sensor Y: 200 mm Measuring volume, tactile sensor Z: 150 mm Cjdpfx Asyl U S Dsa Ejgp MACHINE DETAILS Metrology software: PC-DMIS Vision CCD camera zoom: 6.5x CNC motorized Dimensions & Weight Dimensions (L x W x H): approx. 705 mm x 986 mm x 890 mm Machine weight: approx. 170 kg SCOPE OF DELIVERY PC including PC-DMIS Vision measuring software Documentation / manuals Workpiece clamps / stops for securing the items to be measured Various probes included Probe change rack for storing 4 probes

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 2183, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 60,000 rpm, controller model: GE Fanuc Series 16-M, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cgsdsyl U Nvjpfx Aa Esp Travel X-axis: 500 mm Travel Y-axis: 300 mm Travel Z-axis: 450 mm Spindle speed max.: 60,000 rpm Spindle speed min.: 9,000 rpm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 900 mm/min Rapid traverse range: 0.5 – 14,000 mm/min (infinitely variable) Table dimensions: 600 x 380 mm Max. table load: 300 kg Tool holder: Collet EX 19, grinding arbors E19 MACHINE DETAILS CNC controller: GE Fanuc Series 16-M Input voltage: 400 V Control voltage: 24 V Power consumption: 7,500 W Input frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,250 x 4,000 x 3,250 mm Total weight: 4,500 kg EQUIPMENT Documentation/manual Extraction system Coolant system Sealing turbine

Year of construction: 2012, condition: good (used), machine/vehicle number: ENOG, DEMAG KBK crane headliner crane runway dimensions approx. 8x4m Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK1+2 rails Cjdsmqf Nfopfx Aa Eegp The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DC-COM 250KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 15,513 h, machine/vehicle number: 31662, controller manufacturer: Cadman, bending force (max.): 137 t, working length: 3,100 mm, TECHNICAL DETAILS Pressing force: 1,350 kN Working length: 3,100 mm MACHINE DETAILS CNC control: Cadman Axes: Y1, Y2, X, X1, R, Z1, Z2 Cjdpeylwg Defx Aa Ejgp Operating hours Total on-load hours: 15,513 h Motor running hours: 28,347 h EQUIPMENT CNC crowning Angle measuring system (not connected) Wila hydraulic upper and lower clamping