Cantilever rack

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Nkedpfx Asx U Af Sod Njt Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: new, number 70 Positionen weight 90 kg condition neu 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 Nedpfxswth N Ts Ad Nekt 1x Set of Stop and Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Bar diameter max.: 20 mm Turning length max.: 205 mm Main spindle speed max.: 10,000 rpm C-axis (main spindle): 0.001 degree Counter spindle speed max.: 10,000 rpm C-axis (counter spindle): 0.001 degree Tool capacity: 18 tools Axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Nkjdpfx Aex U Afxed Njt Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor belt Bar feeder FMB Turbo 3-26

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, controller model: Cincom Mitsubishi Meldas, counter spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Nksdpfex U Ad Uex Ad Net Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Main spindle C-axis: 0.001 degrees Max. sub spindle speed: 10,000 rpm Sub spindle C-axis: 0.001 degrees Tool capacity: 18 tools Number of axes: 7 MACHINE DETAILS Control: Cincom Mitsubishi Meldas Dimensions & Weight Machine dimensions (LxWxH): 2,540 x 1,450 x 1,850 mm Machine weight: 1,750 kg Bar feeder dimensions (LxWxH): 3,900 x 900 x 1,450 mm Bar feeder weight: 850 kg EQUIPMENT Parts conveyor FMB Turbo 3-26 bar feeder

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Nkedsww Nd Topfx Ad Nst Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0501DN6870, Year of construction: 2024, operating hours: 128 h, load capacity: 1,500 kg, lifting height: 3,000 mm, overall weight: 2,940 kg, wheelbase: 1,475 mm, Equipment: sideshift, TECHNICAL DETAILS Load capacity: 1,500 kg Lift height: 3,000 mm Wheelbase: 1,475 mm Distance to load centre: 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 1,120 x 2,130 mm Total weight: 2,940 kg Max. battery weight: 283 kg Nodpfx Aex Ux Rksd Nokt Operating hours: 128 h EQUIPMENT Side shifter Lighting Indicators Rear-view mirror Protective roof Trailer coupling Power steering Solid rubber tyres at the front, pneumatic tyres at the rear Charger

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,300 mm, workpiece height (max.): 140 mm, controller model: Xinje XD5, empty load weight: 4,500 kg, working length: 200 mm, TECHNICAL DETAILS 1st Station: 15 cup grinding brushes with quick-change mount 2nd Station: 15 cup grinding brushes with quick-change mount 3rd Station: 9 tangentially arranged grinding brushes 4th Station: Crosswise roller with grinding brushes over the entire working width Nsdex Tt Uuepfx Ad Nokt 5th Station: Crosswise roller with grinding brushes over the entire working width 6th Station: Air nozzle across the entire working width Working width: 1,300 mm Working length: 200 mm Workpiece height: 3 - 140 mm MACHINE DETAILS Control system: Xinje XD5 Total power requirement: 13.4 kW Dimensions & Weight Required floor space: approx. 5.1 x 2 x 2.3 m Machine weight: approx. 4,500 kg EQUIPMENT Modular control of the module units Frequency converter for speed control Automatic adjustment of working height range Oscillating blowing air in the final section Easy maintenance and replacement of abrasive paper and brushes Spare brushes Grinding inserts Rubber conveyor belt with herringbone pattern, solid steel plate underneath across full width

Condition: used, Year of construction: 2006, Bruks drum chipper Nsdpfsxr Trnex Ad Nekt Model 820CM Year of manufacture: 2006

Condition: ready for operation (used), functionality: fully functional, power: 55 kW (74.78 HP), gearing type: automatic, fuel type: diesel, empty load weight: 11,910 kg, Year of construction: 2020, operating hours: 2,761 h, machine/vehicle number: MAN00000K01048416, Equipment: AdBlue, CE marking, TECHNICAL DETAILS Tyre size: 375/85-24 Axle configuration: 4x4 Load capacity: 4,000 kg Lift height: 17.55 m Reach: 13.08 m MACHINE DETAILS Power: 55 kW Transmission type: Automatic Fuel type: Diesel Engine brand: TD 3.6 L4 Emission level: Stage V / Tier IV final Drive: Wheel Chassis design: Rigid Dimensions & Weight Transport dimensions (L x W x H): 6.27 m x 2.36 m x 2.45 m Unladen weight: 11,910 kg Operating hours: 2,761 h EQUIPMENT All-wheel drive CE marking AdBlue system Nsdpfjx Tq Ncex Ad Njkt Forks Quick couplers Stabiliser Additional hydraulics

Condition: ready for operation (used), functionality: fully functional, empty load weight: 34,600 kg, Year of construction: 2019, operating hours: 5,017 h, nominal power: 170 kW (231.14 HP), machine/vehicle number: WLHZ1490LZC047884, Equipment: AdBlue, CE marking, air conditioning, TECHNICAL DETAILS Track width: 600 mm MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 10,000 mm x 3,200 mm x 3,800 mm Unladen weight: 34,600 kg Engine brand: D934 A7-24 Engine rated power: 170 kW Maximum speed: 52 km/h Operating hours: 5,017 h EQUIPMENT Air conditioning AdBlue system CE marking Hammer/shear hydraulic circuit Safety rupture valve – boom/lifting gear Safety rupture valve – dipper/boom Additional hydraulics Hydraulic circuit for tilt/rotator Nedpfx Aox Tqv Nsd Nekt Battery isolator switch Rotating beacon Automatic lubrication system Steel tracks Standard excavator bucket Demolition/FOPS cab guard

Condition: new, Year of construction: 2025, VIBER-SYSTEM WP100 Hydraulic Press Pressing force: 100 tons Piston stroke: 279.4 mm Working range (height): 101.6 – 1016 mm Working width: 812.8 mm Working pressure: 6.9 – 8.6 bar (100 – 125 PSI) Air connection: 1/4″ Operation type: Manual-pneumatic Dimensions (L × W × H): approx. 1092 × 991 × 1905 mm Net weight: 520 kg Nodpfx Asxdb Insd Nekt Gross weight (with packaging): 555 kg Structural element thickness: Frame: 15 mm, Table: 20 mm, Prism: 30 mm

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, shovel volume: 5 m³, Year of construction: 2016, operating hours: 9,118 h, machine/vehicle number: VCEL150HH00005075, Equipment: AdBlue, air conditioning, The wheel loader's tires have been renewed! TECHNICAL DETAILS Bucket capacity: 5 m3 MACHINE DETAILS Dimensions & Weight Transport dimensions (L x W x H): 9.1 m x 3.2 m x 3.9 m Unladen weight: 26,100 kg Fuel type: Diesel Engine brand: D13J Emissions level: Stage IV / Tier IV final Chassis type: Articulated Operating hours: 9,118 h EQUIPMENT Nkodpfx Aox Tqm Ijd Njt Air conditioning AdBlue system CE marking

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1104104, measuring range X-axis: 1,205 mm, measuring range Y-axis: 2,005 mm, measuring range Z-axis: 1,005 mm, workpiece weight (max.): 2,000 kg, workpiece height (max.): 1,115 mm, The measuring table has been supplemented with milled aluminum plates. These plates are equipped with M6 holes in a 50 mm grid pattern, allowing for variable clamping options for workpieces. TECHNICAL DETAILS Nodpfx Adjx U Sv Hs Nskt Measuring range X-axis: 1,205 mm Measuring range Y-axis: 2,005 mm Measuring range Z-axis: 1,005 mm Drive speed in CNC mode Traversing speed: 8–250 mm/s Measuring speed: 1–3 mm/s Drive speed in J/S mode High speed: 0–80 mm/s Low speed: 0–3 mm/s Fine speed: 0.05 mm/s Acceleration Acceleration per axis: 0.1 G Max. acceleration: 0.17 G Resolution: 0.0001 mm Measuring table Material: Granite Working area: 1,408 mm x 2,980 mm Clamping threads: M8 x 1.25 Max. workpiece height: 1,115 mm Max. workpiece weight: 2,000 kg MACHINE DETAILS Dimensions & Weight Main unit dimensions (D x W x H): 3,230 x 2,150 x 3,585 mm Weight (incl. stand and control unit): 5,388 kg Compressed air supply Air pressure: 0.4 MPa Air consumption in normal operation: 100 L/min Air consumption from air source: 150 L/min Temperature conditions Ambient temperature: 16–26 °C Thermal fluctuation per hour: 2.0 K Thermal fluctuation per day: 5.0 K Thermal gradient vertical: 1.0 K/m Thermal gradient horizontal: 1.0 K/m Accuracy Accuracy to ISO 10360-2: E = 4.9 + 5L/1,000 Probing error Probing error ISO 10360-2 (TP2): R = 5.2 µm Probing error ISO 10360-2 (TP200): R = 5.0 µm EQUIPMENT Geopack Cosmos 2.3 software PH 10 probe head TP 200 Change rack Note: The machine was in operation until 2013, after which it was professionally dismantled by the manufacturer. The machine was then stored in an industrial hall. The last factory calibration was carried out in 2013. The calibration certificate is available as an attachment in the listing.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, carrying capacity per cantilever arm: 810 kg, load capacity: 3,900 kg, shelf height: 2,500 mm, total length: 38,750 mm, axle spacing: 1,250 mm, clearance between the columns: 1,250 mm, load capacity per stand: 3,900 kg, throat depth: 800 mm, We hereby offer you, subject to change, 39 linear metres of used heavy-duty cantilever racking, with a load capacity of 3900 kg per stand. Manufacturer SSI Schäfer GmbH Type KR Year of manufacture 2008 Stand load per stand side 3900 kg Support profile stand IPE 180 Stand height 2500 mm Cantilever arm length 800 mm Cantilever arm load 810 kg Nkodpfxovt Um Hj Ad Njt Cantilever arm profile with deflector INP 80 Composition: 34 stands 68 cantilevers 6 cross braces, axis dimension 1250 mm 72 longitudinal braces, axis dimension 1250 mm Cantilever arm shelving system 1: 16 stands, 15 bays, 34 cantilevers, 30 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 17.5 linear meters Cantilever arm shelving system 2: 18 stands, 17 bays, 38 cantilevers, 34 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 21.25 linear meters Condition: The cantilever rack is in very good condition as you can see in the photos and is loaded onto pallets dismantled. The above technical data was taken from the manufacturer's brochures or other sources for which we cannot guarantee their accuracy and completeness. The sale is without guarantee or warranty. We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Mertens & Frowein GmbH service team

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,396 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain 530, number of axes: 3, In 2022, the tool magazine door was replaced. In 2023, the SIMODRIVE 611/18A servo converter was replaced! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 450 mm Travel Z-axis: 450 mm Tool holder: SK 40 Number of axes: 3 MACHINE DETAILS Control: Heidenhain 530 Operating hours Spindle hours: 18,396 Machine hours: 56,040 Nkjdpfex Up E Esx Ad Net