High Lift stacker

Linde L12 I // UVV // Baugleiche Geräte verfügbar

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Bjdpfekqlf Sjx Amrjdh Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 2021, condition: new, Hosokawa Alpine Mikropul ACM and ZPS spare parts for your mills ACM 2 - ACM 150 or ZPS 100 to ZPS 630. Other manufacture or types on request. Bedpfx Amegn Edljredh We are able to deliver spare parts like: Classifier wheels, Liner, complete Bearing Assembly ( new or overhaul ), hammer with carbide face, shroud ring

Year of construction: 2014, condition: used, Used powder coating line. Shutdown in 2024. - container mixer Mixaco, typ CM1000-MT, with 4 x ss tank 800Ltr new.: 2014 - extruder Coperion, ZSK 43 MV, new.: 2014 - SBS Cooling Conveyer 800mm wide x 5000mm long - mill Hosokawa Alpine, typ ACM40 EC CL, new: 2014 - dosing device Gericke, typ GL D 7, new: 2014 - feeding device Hosokawa, new: 2014 - pressure filter Hosokawa Alpine, new: 2014 Bdodpfx Amjvxrm Usreh - stainles steel cyclone diam.: 500 mm - 2x rotary screen AZO, typ E 240 - pocket filter, with 45 kW el. motor - cooling unit Climaveneta typ NX/K 0914P - cooling unit Climaveneta typ NX/K 0552P

Year of construction: 2017, condition: good (used), Used Xtrutech extruder XTS 24 available. The extruder is fully operational and was used in powder coating applications, supplied with many spare parts. We can offer the extruder with Brabender dosing and a cooling belt. Bdjdpfx Asvcynujmrsh

Condition: excellent (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor Bjdpfx Aohgm Dqsmrodh -Rotary valve: completely overhauled -Manufacturer: Rota Val, rotary valve type HD 300 with drive -Drive motor: SEW Eurodrive 0.37 kW -Speed: 1400 / 33 rpm -Inlet opening: 300 x 300 mm -Outlet: 300 x 300 mm -Dimensions: 720/700/H460 mm -Weight: 183 kg

Condition: refurbished (used), Year of construction: 2016, operating hours: 10,057 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 871 kg, FRIEDMANN FORKLIFTS – RECONDITIONED BY EXPERTS. FOR PROFESSIONALS IN ACTION. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical systems – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Strict technical inspection * 400+ vehicles available Bdedpfxszdi H Ee Amreh * Worldwide transport & customs clearance * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on-site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 KLPF Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2016 Operating hours: 10,057 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 871 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 KLPF Battery type: PzS Voltage: 24 V Battery weight: 293 kg

Condition: refurbished (used), Year of construction: 2018, operating hours: 4,570 h, load capacity: 2,000 kg, lifting height: 2,500 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,420 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 899 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive system, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✅ Made in Germany – with responsibility and precision ✅ Strict technical inspection ✅ 400+ vehicles available ✅ Worldwide shipping & customs clearance ✅ Service & spare parts at fair prices ✅ Personal support – even after purchase Test and receive expert advice on site – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: High-lift Pallet Truck ERD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2018 Operating hours: 4,570 Lift height: 2,500 mm Mast type: Duplex Full free lift: No Initial lift: Yes Bdsdpfx Amoy Rq Srjrsh Overall height: 1,420 mm Fork length: 1,200 mm Unladen weight: 899 kg Load centre: 600 mm Tyres: Polyurethane Model type: ERD 220 Battery type: PzS Voltage: 24 V Battery weight: 899 kg

Condition: good (used), Year of construction: 2018, operating hours: 919 h, load capacity: 1,200 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,150 mm, empty load weight: 900 kg, mileage: 919 km, Electric stacker Brand: Linde Year: 2018 ONLY 919 hours Capacity: 1,200 kg Lift height: 2,424 mm Clearance height: 1,150 mm Equipped with FREELIFT Maintenance-free gel battery With INTERNAL charger Bsdpfx Amoy D Unqjrsdh

Condition: used, Year of construction: 2014, operating hours: 3,121 h, lifting height: 2,600 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 1,700 mm, total length: 1,850 mm, total width: 800 mm, color: yellow, Empty weight: 834 kg Lifting capacity: 1.200 kg - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 90439621 - Operating hours: 3121 - Type: Pedestrian stacker - Lifting capacity: 1200kg - Lifting height: 2600mm Bsdjxtb Iaspfx Amrodh - Overhead clearance: 1700mm - Free lift: 0mm - Fork length: 1150mm - Fork width: 560mm - Mast: Duplex - Drive: Electric - Battery information: - └ Battery voltage: 24V - Transport dimensions: 1850mm x 800mm x 1700mm (l x w x h) - Transport weight [kg]: 834kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2021, operating hours: 1,463 h, load capacity: 1,600 kg, lifting height: 2,344 mm, fuel type: electric, mast type: duplex, construction height: 1,665 mm, empty load weight: 1,400 kg, mileage: 1,463 km, Electric duplex stacker Brand: Still Year of manufacture: 2021 ONLY 1,462 operating hours Capacity: 1,600 kg Lifting height: 2,344 mm Mast height: 1,665 mm Equipped with FREELIFT Bdjdpfx Aszv Uz Semrjh Battery: 2021 Automatic filling system Equipped with an external charger Watch the video on YouTube