Return of panels for edgebander

Ligmatech ZHR 01

Condition: used, machine/vehicle number: 007986, Max. panel width: 1000 mm Hnjdpfox A Tggjx Ap Hjt Max. panel length: 2000 mm Length of conveyor: 3500 mm Panel return for edgebander: Right

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Hedpfxeiidm Ns Ap Hsnt Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2010, condition: used, Panel return system for use with a single edgebander The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Hodpfx Asrq Dmrop Hjnt Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm

Condition: new, table length 1300 mm table width 800 mm stroke height 1010 mm weight max. in kg 1000 kg 190 mm connected load frequency 380 V total power requirement 0,75 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1,3 x 0,8 x 0,2 m Hsdpfxofrztxe Ap Hjnt The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc.

Condition: new, Type SK-1000-P6 Working width 1000 mm Min.working length 500 mm Working thickness 2-150mm Polishing roller speed - Frequency control Feeding speed 3-12,5 m/min Total motor power 13.87 kW Disc motor 1.5 kW*1 Hjdpfjdmi Niex Ap Hont Cross motor 1.5 kW *1 Screw roller motor 2.2 kW *2 Feeding power 2.2 kW Up and down motor 0.37kW*4 Swing motor 0.37kW *2 Working table up and down 0.55 kW Transport dimensions 3650x1850x2100mm Weight 4200 kg

Condition: excellent (used), functionality: fully functional, Centauro CO700 Band Saw Hnjdpfx Aevyp I Sjp Hjt Saw wheel diameters 700mm Max. cutting height 460mm Max. cutting width 680mm Max. band width 40×0.6mm Motor power 3kw Wheel rpm 736r.p.m CE certificate Year of production 1997

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Hnodpjukhd Asfx Ap Hot Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: new, Year of construction: 2024, New machine Year of manufacture 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Blade length max.: 4735 mm · Saw blade width min. / max.: 15 mm / 30 mm · Optional with special covering saw blade width min. / max.: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Extraction nozzle: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German mechanical engineering · Machine stand in an attractive, modern, torsion-free double-chamber welded steel construction · Upper and lower doors secured by limit switches · Upper and lower precision band saw blade guide APA 2, size. 2 · Finely planed gray cast iron table · Swiveling table top up to 45° · Dynamically balanced band saw wheels with vulcanized rubber bandages · Stop ruler can be used to the left of the saw blade, stop profile can be folded over · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth width 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard using a handwheel with locking pinion Hjdpfxsw Nablo Ap Hont · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE-compliant Incl. transport pallet Incl. pre-freight to 65239 Hochheim Availability: short term Storage location: Flörsheim

Condition: new, Bernardo HBS 460 N bandsaw - 400 V Technical specifications Cutting width 465 mm Cutting height 280 mm Saw band dimensions 3607 x 25 x 0.6 - 3 TPI Saw band widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimensions 480 x 630 mm Table height 970 mm Saw table tilt -5° to 45° Dust extraction port Ø 2 x 100 mm Motor output power S1 100% 2.2 kW (3.0 HP) Motor input power S6 40% 3.0 kW (4.0 HP) Voltage 400 V Machine dimensions (W x D x H) Hsdpjd N S Urefx Ap Hont 1050 x 800 x 1950 mm Weight approx. 162 kg Scope of delivery • Saw band • Rip fence with magnifying glass • Miter fence • Drive wheels made of aluminum • Ball-bearing saw band guide • Motor incl. brake • Push stick • Operating tools

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Hodswacqlspfx Ap Hjnt Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr