PANELS RETURN SYSTEM for EDGE BANDER

LIGMATECH (Homag Group) ZHR 02/L/095/S

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Dsdpfot Hmppjx Akvock Panel return for edgebander: Left

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Dcedsiidm Nopfx Akvjk Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 2026, condition: new, Fully automatic horizontal stretchfilmwraping machine with air bubble film unit SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. Dcsdpfxefuwrce Akvek operator side: - in throughput direction right General machine features: - Main motor power: 2,2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1600 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic stretchfilm hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit. (INCLUDED FOR THIS OFFER) Technical features: Product to Wrap Sizes - Max. length: Unlimited - Min. length (wxhxl): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 10 m/sec. - Max. Load Capacity: 150kg/ m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron Air bubble film unit: - Max. film width: 1350mm - Max. film reel diameter: 700mm - Reel core diameter: 20~76mm - Suitable film materials: PW film, PE air bubble film, PVC film - Cutting & welding system operating temperature: 50°C~150°C

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets Djdpfx Ajyaiiyekvjck • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: used, machine/vehicle number: 007227, Position 1: Single Edgebanders HOMAG + LIGMATECH-KAL 310 + ZHR 05 Position 2: Panel Return Systems HOMAG + LIGMATECH-KAL 310 + ZHR 05 Dcedjwuuc Aepfx Akvsk

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE. Dcsdpfx Akshknbrjvjk

Condition: used, Load capacity: 3200 kg/shelf Crossbars: 3600*140*50 mm 2700*125*50 mm Dsdpfsg Tmvhjx Akveck 800 kg/pallet load capacity Frames: 8500*1100*100 mm 7900*1100*120 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: Frame, corner, and impact protection, push-through guards, chipboard, grating, back panel grating, deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code and location, as well as the desired quantity of items. Additional service offerings: Planning, shelving installation/dismantling, purchase/sale Changes and errors in technical data, specifications, and prices, as well as sales subject to prior sale!

Condition: excellent (used), Year of construction: 2015, I sell the 2-head UV-drying tunnel Superfici Essiccatoio UV Model: Poliedra S.Cure 1650x2 + TT1 3500. Year 2015. Available immediately. Dodpfx Akeffk Etevock Repairs needed: Display, Energy power units for each two UV-units

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF Dodpfx Akjwuck Isvock

Condition: used, machine/vehicle number: 006042, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 40 mm Operating Units: 9 nr Dcjdpfx Aowacqlskvjk