Dust extractor fan 0,65 kW

LH RMN160/1W

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Kedpfx Ahjwn D Izo Nsdg Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Kdodpfxjbqt Ars Ah Nog

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Kodpfxsucnuke Ah Nsdg Total connection 39kW

Condition: ready for operation (used), functionality: fully functional, Chipper for wood, lumber shavings LINDNER type T 400/140-2 - after technical inspection - very good condition - for technological chips Kdjdpfx Aor Ak Rgjh Nsg TECHNICAL PARAMETERS: inlet width 400 mm inlet height 140 mm rotor diameter 450 mm rotor length 400 mm power of main motor 33 kW power of motors from feed 2 x 1,5 kW number of knives 2 pieces sieve size 60 mm x 90 mm feed shafts in very good condition power of feeder motor 1,5 kW length of feeder 4200 mm transport dimensions (length / width / height) 430 / 240 / 150 cm weight approx. 2000 kg

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, DROZDOWSKI PRP 58 FRAME SAW complete with accessories: - Chain cross conveyor - Chain longitudinal conveyor - Hydraulic system - Roller outfeed table - Saw blade sharpener - Set saw set tool Machine underwent a complete overhaul at the manufacturer's facility – perfect condition. Technical Specifications: Horizontal frame clearance: 580 mm Vertical clearance between rollers: 350 mm Saw frame stroke: 300 mm Kdedpfx Ahjxawddj Nsg Main shaft speed: 330 rpm Feed rate: 0.5 - 2.5 m/min Blade dimensions (L x W x thickness): 815 x 70 x 1.6 mm Maximum number of blades: 12 pcs Main motor: 15.0 kW / 400 V Feed motor: 0.75 kW / 400 V Hydraulic pump motor: 0.75 kW / 400 V Lubrication pump motor: 0.18 kW Minimum length of log to be sawn: 1.8 m Minimum board thickness (standard): 13 mm (9 mm with single blade setup) Log cutting height above ground: 880 mm Track height above ground: 600 mm Roller pressure: hydraulic Overall dimensions of saw: 1.20 x 1.70 x 2.10 m (H) Total length of line with track: 10.00 m Weight with standard equipment: 3500 kg

Condition: refurbished (used), Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned with new bearings ( spherical roller bearings), checked rotor and new drive motor New cutting blades and counter blades Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Year of manufacture: 1981 / overhauled in 2007 Machine colour: RAL 6011 Reseda green Chipping knife and counter knife, new Incl. 6 chipping knives, new Incl. steel substructure H = 700 mm Ksdpfx Aexcb I Ejh Nsdg without electrical installation Drum chipper | Wood chipper | Chipper | chipping machine | wood chipping machine | shredder | wood shredder

Condition: used, Year of construction: 1998, LBL Brenta Oxia Kodpsvw Rnbefx Ah Nodg -max. cutting height 150mm -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Year of construction: 1984, condition: excellent (used), An Edging Saw in very good condition Kdodpshuiwxsfx Ah Njg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Vecoplan drum chipper, robust. VTH 65 / 18 / 3. Infeed width 650 mm. Infeed height 180 mm. Rotor diameter 60 mm, solid steel. 3 feed rollers. 2 chopping blades. Screen size 55 x 55 mm. Counter-blade with interchangeable mount. 2 feed gearboxes, each with 3.0 kW power. Electrical control cabinet with control system. Drive motor 45 kW. Has not been in operation for 18 years. Kedpfx Ahsx Dlk To Nsdg

Condition: good (used), CV saws grinder Albert Göcker Kjdpjqutd Refx Ah Njdg