Imagesetter

Kodak Trendsetter VLF

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Chjdpfx Ajxluukeb Tef

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 6541110, Format (cm): 137 Equipment / Additional information: Chedsxixdwspfx Ab Tof Side tables, air table, safety barriers, 1xreserve knife -PALLET LIFTER -VIBRO TABLE RAB5 (M. No.: 6581211 // Age: 1995) -UNLOADER TR 1ER 145-4 (M. No.: 6591126 // Age: 1995)

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 7141440, Size 137 cm, chromed air table, program, spare knife Machine no.: 7141440 Chedsw Inymspfx Ab Tef

Condition: ready for operation (used), Size: max 750 x 1.050 mm min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Chsdpod N D Nvjfx Ab Tjf Depth: 2.970 mm Weight: 850 kg (approx.)

Condition: new, Die cutting machine ML-1800 NXL Brand new machine. This is the heaviest die in this format. Format: 1800 × 1280 mm Weight: 12,500 kg 380 V power supply Engine: 11 kW Equipment: – pneumatic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – pneumatic sheet lifting system on the clamp – additional safety guards and pressure safety mats – operating tools and instructions with CE documentation. The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Poland. Possibility of testing in the showroom in Radom. Chedeu Ul Tzopfx Ab Tof

Condition: excellent (used), Year of construction: 1992, Arpeco Impressionist 420mm web width unwind with roll lift and pneumatic 3” mandrel splice table web guide Sherman corona treater 7 x print units 7 x double UV dryers 7 x chill rolls all UV lamps are BRAND NEW ! 1 x 9.5kW chiller IR dryer Hot Air end of press double size chill roll 2 x rewind mandrels pneumatic 3” Chodpfxsrrvzro Ab Tof many print cylinders and anilox rollers

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Chedewypp Iepfx Ab Tof Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: ready for operation (used), Fully Automatic Flatbed Die-Cutter, Non-Stop Feeder, Automatic Vacuum Plate, Double Sheet Cleaning Station, Turn Die Cutting Frame, (Batch Delivery) Non-Stop Delivery With Belt, Cutting Force 300 TON, Up to 4.500 Speed/H, Working With Corrugated Cardboard Of Thickness Max. 9mm, Min. 0,9mm, Format: Max. 1055x1575mm, Min. 400x600mm, Chodpfxjwly D Ho Ab Tjf Standard Accessories Bobst SPO 1575 EG 1980, fully rebuilted 2015, chain changed 2024.

Year of construction: 2023, condition: new, Best quality and High speed Diecutting machine and hot foil machine.CE Certificate Paper size: 760 X 520 mm - speed - 10.000 s/h 800 X 610 mm - speed - 9.000 s/h 1050 X 740 mm - 7.500 s/h Chodpfxjqzliis Ab Tsf

Condition: new, Year of construction: 2024, Guowei 52 - available immediately on stock in Europe Cutting width CM 52 Max.cutting height without assistance pressing plate CM 7.5 Max.cutting depth CM 52 Min cutting depth without assistance pressing plate CM 2 Extended length of working table CM 47.5 Height of working table CM 87-90 Machine width including side working table CM 79 Total length of working table CM 120 Cutting speed R/MIN 15 Cjdju Nxd Sepfx Ab Tohf Manx. Paper pressure N 7000 Power of main motor KW 2.2 Motor for paper feeding KW 0.2 Machine weight KG 370 Overall dimension CM 137*92*146