5 die - 5 blow transfer header

KIESERLING K55

Condition: good (used), Year of construction: 1981, functionality: fully functional, SINGLE-DIE TUBULAR RIVET HEADER NATIONAL M5 Rebuilt on 2024. New electrical system. Operational, working. Available for any test. Number of die: 1 Number of pieces per min.: 300 Length Rivet: 20 mm. Depth of Pierce (max.): 5 mm. Cutoff diameter: 5 mm. Floor space (width): 1.300 mm. Floor space (length): 2.690 mm. Power of main motor: 7.5 KW Net weight: 3.100 kg. Gross weight: 3.700 kg. Ncjdpfxjtxni Ns Alneu

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Year of construction 1970 Nodpsur N Dajfx Alnocu The machine is ready for immediate use!

Condition: used, Year of construction: 1981, National 2-3 Hot Former induction heater, feeder, straightener Ncjdpfswl Iw Uex Alnsu

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to the Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke: 10000 kgm; Ncodpfx Asw Sdwvjlnsu - Ram weight: 3150 kg; - Operating mode: pneumatic; - Ram stroke: 900 mm; - Number of blows per minute: 90; - Working pressure: 5 - 7 bar; - Anvil weight: 63 to ... - Total weight: 100 to ... Video of the machine in operation is available!

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Diameter of bars from 4mm -33 mm All machines underpowered Nedov H Ap Aepfx Alnscu

Condition: ready for operation (used), Year of construction: 1983, BOLTMAKER SACMA SP.17 – 4 dies Fully functional with thread rolling machine up to M6. Incoterm: EXW The machine operates without any issues. Technical specifications below: Number of dies: 4 Heading tonnage: 480 kN Max. cutoff diameter at 500N/mm²: 8 mm Max. cutoff length: 65 mm Kickout stroke die max.: 45 mm Kickout stroke punch max.: 14 mm Max. thread 8.8/12.9: M6 Speed (pcs. per minute): 350 Main motor power: 26 kW Njdpjwvt Hvjfx Alnecu Die diameter: 45 mm Die length: 70 mm Fixed punch diameter: 38 mm Fixed punch length: 85 mm Net weight: 10,000 kg Gross weight: 11,900 kg The machine is available for any inspection.

Condition: refurbished (used), Year of construction: 2025, Progressive Header Machine SACMA SP.250 4 Dies - Currently being overhauled. Available upon request from HBR srl. The machine will be completely overhauled. Square wedges. Available with the soundproof cabin, Brankamp, ​​and the conveyor belt. New electrical system with inverter and PLC acc. to Ce Standards. Technical information: Number of dies: 4 Heading tonnage: 650 KN Maximum cutoff diam 500N/mm²: 10,5 mm. Max. cutoff length: 85 mm. Kickout stroke die max.: 65 mm. Njdexrdmijpfx Alnocu Kickout stroke punch max.: 20 mm. Speed pcs. per minute: 275 Power of main motor: 30 KW Diam. die: 54 mm. Length die: 90 mm. Diam. punche fixed: 45 mm. Length. punche fixed: 100 mm. Net weight: 11.000 kg. Gross weight: 12.600 kg. We look forward to seeing you at HBR srl in Calolziocorte (LC).

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: M08I/8958, Offer Number: M08I/8958 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off , PKO , Forma packs Make: NATIONAL FORMAX Type: FX35CF Constr. year: 1995 Nsdpfxswm Rufj Alnscu diameter range: 11,8 mm number of dies: 5 number of stations: 6 cutting length: 3 - 45 mm shaft length under head: 50 mm output - pieces/min: 85 - 255 press power: 50 to Location: Germany

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M08E/9065, Offer Number: M08E/9065 Machinetype: 5 die - 5 blow transfer header Info: bushing cut-off Make: SAKAMURA Type: BPF540 Constr. year: 1990/09 diameter range: 23 mm Ncodpex Igg Tsfx Alneu number of dies: 5 number of stations (incl. cut off): 6 cutting length: 175 mm shaft length under head: 130 mm output - pieces/min: 86 - 130 press power: 220 to Location: Europe

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Nodpfx Aljxu Hlgenocu Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Connection: 70 kW Weight: 16 t Dimensions: 7,000 x 7,400 mm