Screw compressor

Kaeser SK 21

Condition: good (used), Year of construction: 2007, operating hours: 9,600 h, functionality: fully functional, Kaeser SK21 screw compressor from 2007 in excellently maintained condition. Maintenance kit (oil separator cartridge, replacement filter, air filter, and oil) is included. Maintenance records and compressor logbook are available. Power: 11 kW Ppsdex H Uluopfx Aalsl Pressure: 8 bar Load hours: approx. 9,600 h #8442

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Ppjdpfx Aot D E Aiealol Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase Ppsdpfx Aajw Nhavelol

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Ppjdexnnd Rjpfx Aalol Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available Ppjdpetlzdqjfx Aalel -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Year of construction: 1992, condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min Ppjdpjl Tuvdofx Aalel -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Podpewkf Dvofx Aalepl Maximum panel thickness: 60 mm Operating Units: 7 nr

Year of construction: 2016, condition: ready for operation (used), Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. Pjdpsiph Uvjfx Aalspl

Condition: used, Year of construction: 1994, The emergency power generator was rarely used; it was connected to the heating system, which is why it does not have a water cooler. There are a total of 2 units available; the price is for 1 unit. Psdpfjxdc Ehjx Aalopl

Condition: used, machine/vehicle number: 007687, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Pjdpfx Aswuz Npoalspl Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr