Scrubber drier

Kärcher Kira B 50

Condition: ready for operation (used), Swing diameter over bed/cross slide: 650mm/430mm, distance between centers: 3000mm, bed width: 450mm, max. workpiece weight: 1800kg, spindle speed: 2000rpm, rapid traverse: 8m/min, feed rate: 2m/min, quill diameter: 105mm, quill stroke: 225mm, taper: MK5, tool stations: 8. Machine dimensions X/Y/Z: approx. 5300mm/2300mm/2200mm, weight: approx. 7000kg. Documentation available. An on-site inspection is possible. Rsdpjxr Nvcefx Amyocd

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp Rcjdoyhc T Ijpfx Amysd (14) units available.

Condition: used, Year of construction: 2024, PTO shaft Walterscheid W2480- / Rcsdpeud H Hhjfx Amyod

Condition: like new (used), functionality: fully functional, 1 new, high-performance knife grinding machine MVM KX 250 – 2100 mm (exhibition machine) * 1 year warranty • Siemens Touch Screen PLC 7" • Grinding wheel motor 11 kW, 15 hp, 400V-3-phase-50 Hz • Grinding wheel diameter 250 mm Rcjdpfx Amox Nhnhoysd • Magnetic rotary table 0 to 90 degrees • Width of magnet: 150 mm • Length of magnet: 2100 mm • Vernier dividing head for magnetic rotation +/- 90° • Quick-change clamping device for the grinding wheel (bayonet quick coupling) • Automatic feed controlled by Siemens PLC (0.001-0.1 mm) • Variable slide speed 1 – 30 m/min. • Automatic lubrication of the PTFE slide shoes • Coolant injection in the center of the grinding wheel, plus 2 nozzles on each side • External coolant tank with pump • Magnetic separator with discs for cleaning the coolant, with manual paper tape filter • Motorized quick-change flange enables fast tool changes • Variable grinding wheel speed • Bellows with magnetic attachment to the slide, covering the entire slide travel • Reversal of grinding wheel direction of rotation • LED lighting • Dimensions 4.12 x 1.50 x 1.75 m • 1 year warranty

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm Rodpowh Sigefx Amyjcd We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: new, Year of construction: 2020, functionality: fully functional, power: 320 kW (435.08 HP), Brand new Mercedes-Benz OM 470 engine. Suitable for multiple cranes. Contact for price and other engines available. Rcedpfexw R Dxox Amyed

Condition: like new (used), Year of construction: 2013, measuring range X-axis: 1,600 mm, measuring range Y-axis: 4,200 mm, measuring range Z-axis: 1,500 mm, workpiece weight (max.): 5,000 kg, Equipment: type plate available, CARL ZEISS CNC coordinate measuring machine ACCURA II MASS 16/42/15 Year of manufacture: 2013, Overhauled: 2025 Measuring range: X = 1600 mm, Y = 4200 mm, Z = 1500 mm Control system: C99 SR VII Control panel: BP26_SE Sensor: VAST XT GOLD and RDS-CAA with VAST XXT Probe changing magazine: Multi Sensor Rack MSR Automatic temperature compensation Accuracy: VAST XT GOLD / RDS-CAA XXT Rcodpfeydnzcox Amysd MPE-E 3.6+L/300 4.9+L/200 R0 2.4 5.5 MPE-P 3.6 4.9 MPE-THP 3.7/68sec 4.7/68sec RONt 3.5 5.5 HP Z4 WIN11 workstation with 27" monitor Calypso Basic, current version Any further option possible Accessories: Calibration sphere Exchangeable probe tips XT and XXT Exchangeable magazine slots Probe accessories Documentation Further accessories

Condition: good (used), Centerless grinding machine HERMINGHAUSEN SR40 III CNC Rcedpfx Asgq Ddfjmyod

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Redpfoyidvdox Amyscd Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Rcjdpsyw I Azsfx Amysd Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base