Telehoist load lugger truck

Iveco Stralis 260SY48 Abrollkipper + KRAN EU6

Condition: new, Year of construction: 2024, Vertical Turning center SCR 50 2S Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 4.500 mm Machining Diameter Optional 4.700 mm – with the CE Enclosure - 5.300 mm ( without ) Machining Heights 2.100 mm Work Piece Weight 30.000 kg Nominal Turning Travels X & U - Axis Ram Carriage From -100 mm Dlodjhh Dnxepfx Ab Tja To 2.600 mm Z and W - Axis Ram 1.250 mm Faceplate Diameter 4.500 mm/Normal face plate with T-slots Jaw chucks height 200 mm Work Table Speed: 0-50rpm Power Continuous S1 96 kW Torque Continuous S1 130,000 Nm Turning main drive mechanism Gear box reducer ZF and belt transmission Z & W - Axis Ram Turning Ram - Left and Right side Ram Size 250 by 250 mm Tool holder type KM 63 Tool Storage (ATC) No. of Tool storage 2 Tool Storage, left and right sides Stations qty 12 stations per each tool storage Stations type Turning toolholder ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum tool weight 50 kg Maximum tool size 250 x 150 mm X 700 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Z-Axis Ram Power Continuous S1 6.5 kW Thrust Continuous S1 45,000 N Axes Rates X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min X, U And Z, W-Axes Rapid Rates 6,000 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -external coolant (turning) -internal Filtration unit: -type -accuracy 6 bar at 100 LPM 40 bar at 60 LPM Chips conveyor Conveyor type Hinged (Hardox material) Width The conveyors should have a width of 600 mm CNC Control -type -producer Sinumerik 840 Dsl Siemens

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth Dlsdpfovwgm Hjx Ab Tja One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 Djdpfju I E Emox Ab Tola daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Year of construction: 2013, condition: new, Various thread rolling tools Manufacturer: Fette see list all tools new ! Dlodpfx Ajbv Tg Hsb Toa M12-14x1,5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 US T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 M8x1 T18-17-21.5 1539787 1 11/16-14UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,160 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: FANUC, controller model: FANUC 0i-MD, total height: 3,170 mm, total length: 5,500 mm, total width: 2,892 mm, table width: 760 mm, table length: 2,160 mm, table load: 1,800 kg, overall weight: 15,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 800 mm, spindle motor power: 18 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, tool length: 300 mm, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED vertical machining center “DOOSAN mod. DNM 750L-” with FANUC 0i-MD CNC Dljdsw D Aynopfx Ab Tea

Year of construction: 2009, condition: good (used), Load capacity: 30 t Fine lift Dedoqiz N Rjpfx Ab Tjla Lifting height 9 meters

Condition: excellent (used), mileage: 493 km, power: 368 kW (500.34 HP), fuel type: diesel, color: white, axle configuration: 8x4, fuel: diesel, brakes: engine braking, gearing type: automatic, emission class: euro6, Year of construction: 2024, operating hours: 1 h, Equipment: ABS, air conditioning, cruise control, low noise, navigation system, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Power brake booster - Electric windows - Electrically adjustable exterior mirrors - Speed limiter - LED lights - Alloy wheels - Air horn - Fog lights - Particulate filter - Side skirts - Sun visor - Stability control - Power take-off (PTO) = Further Information = Driveline AdBlue system: Yes Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle 1: Alloy wheels; steered Front axle 2: Alloy wheels; steered Rear axle 1: Twin tires; alloy wheels Rear axle 2: Twin tires; alloy wheels Dledpfx Abouxviqe Tsa Weights Unladen weight: 21,160 kg Functional Boom: Telescopic (8 sections) Boom length: 22 m Lifting capacity: 18,000 kg Lifting height: 2,200 cm Crane: HIAB X-HIPRO 548 E-8, mounted behind the cab Superstructure brand: HIAB X-HIPRO 548 E-8 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request NEW VOLVO FMX 500 8X4 WITH HIAB OPT25S56 HOOKLIFT + HIAB X-HIPRO 548 E-8 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X4 AP AXLES LEAF SPRING SUSPENSION WHEELBASE 510 CM NEW MODEL FMX CAB WITH AIR CONDITIONING AUTOMATIC TRANSMISSION WITH ENGINE BRAKE ALCOA WHEELS HIAB 25 TON HOOKLIFT TYPE: OPT25S56 ADJUSTABLE UNDERRUN PROTECTION HIAB X-HIPRO 548 E-8 CRANE 8X HYDRAULIC EXTENSION RADIO REMOTE CONTROL 5TH + 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 18,000 KG MAX WORKING HEIGHT 2,200 CM MAX LIFTING CAPACITY AT 1,960 CM: 1,720 KG 4X OUTRIGGERS NEWLY BUILT UP TO 2023!!! 2 UNITS IN STOCK FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: used, Technical details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm table surface area: 5500/12150 x 3000 mm max. workpiece weight: 70.000/105.000 kg ram head dimension: 480 x 510 mm milling spindle motor: 63 kW max. torque on the spindle: 3300 Nm tool taper: DIN 39871 AD ISO 50 milling head speed: 6,3 - 4000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 29,0 x 7,7 x 8,1 m The machine is in mint condition and was generally overhauled in 2020! with CNC SIEMENS 840 D autom. tool magazine for 153 tool stations autom. milling head magazine for 6 heads Dodowc A Shjpfx Ab Tjla milling heads - straight - straight extended length - milling head -angular head standard - 4000 rpm, 144 x 2,5°, ISO 50 milling head -angular small extended length -40 kW, 4000 rpm, 1800 Nm, 144 x 2,5°, ISO 50 milling head -universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2,5° , B-axis +/- 44 x 2,5°, ISO 50 coolant attachment, chip conveyor *

Condition: used, Year of construction: 2014, - - - - - travels - - - - - - - - - - - travel -x axis 10.000 mm travel -y axis 1.500 mm travel -z axis 4.000 mm - - - spindle - - - - - - - - - output 62.5 kW turning speed range 262 - 4.000 U/min Torque 2.280 Nm - - - table - - - - - - - - - Size of table plate 2x (2.500 x 3.000) mm longitudinal travel 2.000 mm max. load 30.000 kg solution 0,0005 ° solution 1,8 sek. table turning speeds 1,5 U/min - - - further technical details - - - - - - control Siemens 840 Dsl numbers of positions in the tool changer 80 tool taper ISO 50 max. feed 25.000 mm/min - - - T-slots - - - - - - - - - size of T-slots (DIN 650) 28 mm Dlodpewrztvofx Ab Tsa T-slot - distance 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools Dljdewa Dx Ropfx Ab Toa - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation