Washing machine

ISTOBAL HW’R forgófejes haszongépjármű m

Condition: excellent (used), Bitzer compressor set -Type: 6HE-25Y-40P (x3) -Flow: 110.5 m3/h (x3) -Cooling capacity for R404A: 137 kW at -5°C/40°C, 109 kW at -10°C/40°C, 49 kW at -25°C/40°C Lredpfx Aevc Eknsdkew -Unit dimensions: 2720 x 830 x 2120 mm -Control panel included -Control panel dimensions: 1600 x 420 x 2000 mm -Quantity in stock: 1 -Stock number: Z92 -Condition: Used, very good

Year of construction: 2018, condition: excellent (used), AGGREGATE for a refrigerator with evaporators and condensers - currently installed in a hall with an area of ​ 5,000 m2, with a cooling temperature regime of 4 to 8 °C, intended for the storage of fruits and vegetables. Please contact us for full technical specification. Thank you! Lrsdpfjttq E Esx Adksw

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Ljdpfx Aou Thbxjdkjrw Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Cooling compressors set Bitzer -Type: 4VHC-10K-40P (x4) -Volume: 28.9 m3/h (x4) - Refrigerant: CO2 -Refrigerant tank and control panel in set -Cooling capacity for CO2: 328 kW at -25°C/40°C, 267 kW at -30°C/40°C -Dimensions: 3400 x 1600 x 2200 mm -Control panel dimensions: 2520 x 500 x 2270 mm Lsdpfevb T R Hex Adkjrw -Items in magazine: 1 -Reference number: Z95 -Condition: Used in good condtion

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 240 V, ambient temperature (min.): 16 °C, electrical fuse: 16 A, input current: 2 A, input frequency: 50 Hz, ambient temperature (max.): 25 °C, stack height: 880 mm, total length: 2,500 mm, total width: 850 mm, overall weight: 155 kg, inner dimension width: 733 mm, inner dimension length: 2,343 mm, tank capacity: 753 l, energy consumption: 5 kWh, power: 50 kW (67.98 HP), Equipment: freezer, lighting, Fun Ice SRL is AHT representative in Romania since more than 25 years All equipments are refurbished, but our company is selling the not-refurbished units as well During refurbishment, all the proposed used freezers undergo a full factory restoration, namely: - damages and dents of the case are eliminated; - 3-sides labeled on white RAL9003 / Gray RAL7043 (Optional any RAL or design available on request) - Hygienically cleaned - glass lid seals changed - fully accessorized inside - wall grid set, shelves and dividers - complete testing of the freezers is carried out with preservation of the change statistics and maintenance of the set temperature; - if necessary, repairs are made exclusively by ORIGINAL NEW spare parts from the manufacturer (AHT Cooling Systems GmbH); (According to the company's policy, donor parts from other freezers are never used for reconditioning) - all freezers are packed in the original factory manufacturer’s transport packaging (AHT Cooling Systems GmbH); (At the request of the customer, it is possible to use reinforced packaging for deliveries over long distances and on bad roads) All reconditioned AHT EQ series freezers are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Lredpfxsrhwrbj Adksw - Can be used as a stand-alone unit - Can be used in a line up - Accessories on stock (fixing brackets, top and side covers for multiplexing in a island, glass lid seals, sliding glass lids) - Spare parts available (compressors, inverter, control panel, sensors, fans)

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Lredpou Thypjfx Adksw Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Condition: ready for operation (used), functionality: fully functional, warranty duration: 6 months, Price availble for below configuration : Top Freezer AHT Kinley or Epta 250 combined with not-refurbished horizontal cabinet AHT Miami, but tested and complete grid system inside (shelves and dividers), glass lid seals changed Fun Ice SRL is AHT representative in Romania since more than 25 years AHT reseller of new and used equipments Quick delivery, worldwide AHT Kinley 210/250 cm (can be used as a freezer or refrigerator, medium and low temperature) !!! Fully tested and complete system (base + 2 rows of shelves) Refrigerant ECO R290 Lrodpjrhwuwefx Adksw Ready to plug-in, easy installation LED internal light (canopy LED and doors LED lighting) Random units on stock - AHT Kinley / Epta or Carrier top freezers at 210 cm and 250 cm lenght Can be combined with AHT Miami or Athen XL LED cabinets (on stock in Oradea, Romania) All reconditioned AHT EQ series equipments are warranted for 6 (six) months for parts, with the exception of consumable and wear materials (refrigerant, gaskets, neon lamps, etc.) Any accessories and spare parts on stock

Condition: ready for operation (used), Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Induction cookers EKU C-I-750-EST-4-3.5 with dimensions 80 x 75 x 80 cm PAULUX dimensions 40 x 50 x 35 cm Fryers with dimensions 80 x 80 x 80 PAULUX 80 x 80 x 80 cm 2 pieces PAULUX 60 x 80 x 35 cm Shelves with dimensions Lrjdpfsq A Supsx Adkew 190 x 50 x 40 cm 3 pieces 140 x 40 x 80 cm Toaster oven dimensions: 40 x 65 x 30 cm 2 pieces Water conditioner Thermos A set of shelves with shelves Hoods with dimensions 320 x 90 x 55 cm 100 x 45 x 60 cm 80 x 55 x 90 cm 160 x 45 x 100 cm 96 x 45 x 100 cm 90 x 80 x 150 cm 60 x 43 x 70 cm And other smaller devices visible in the photos

Condition: good (used), Year of construction: 2013, functionality: fully functional, Machine is still in production. It can be inspected in Greece. It is ready to be used. Lodpfx Adsv A I E Iskjrw

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. Lrodpfxeuxmt Ts Adksw The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.