Moulding Press

IMS Deltamatic

Condition: good (used), Year of construction: 1994, functionality: fully functional, total length: 2,700 mm, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm Podpfx Aeucdgpshvopp PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. All statements without guarantee. Without transport costs. Ppjdpfx Aog Rn Efshvop

Year of construction: 2001, condition: used, - heating plate size (mm): approx. 1500 x 2700 - usable area max. (mm): 1250 x 2450 - loading side (mm): 1500 Ppjdpfx Ajkt N Huehvsp

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Table size 2600*1800mm maximum daylight 2200 mm clamping force 300T Ppsdperl Irkefx Ahvop table size 2600*1800mm max day light 2200mm clamping force 300T

Condition: used, Year of construction: 1999, Pressure 400 t stroke 800 mm distance between columns 2820 mm Side window 950 x 1100 mm distance table/ram (stroke up) 1600 mm table surface area 2800 x 1200 mm die cushion capacity in table 150 t die cushion stroke in table 200 mm die cushion area in table 2000 x 800 mm table height over floor 650 mm ram surface 2800 x 1200 mm speed down 420 mm/s speed up 300 mm/s working speed 17,5 - 29,5 mm/s Pedpfev Sva Sjx Ahvepp oil volume 2500 l power requirement 75,0 + 22,0 kW Weight 50,0 t dimensions (WxDxH) 4,1 x 2,8 x 7,2 m height over floor 6,15 m permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, hydraulic ram interlocking, two-hand and four-hand operation

Condition: used, Year of construction: 2018, Pressure 315 t stroke 750 mm distance between columns 1700 mm Distance table/ram, max. stroke up, adjustment up 1250 mm Table surface area 1600 x 1300 mm pressure of drawing cushion in table 125 t Die cushion stroke in table 350 mm Die cushion pressure in ram 1000 x 900 t Ram surface 1600 x 1300 mm Side window 1100 mm feed down 400 mm/s feed up 400 mm/s working feed 12 - 44 mm/s oil volume 2500 l power requirement 35,0 kW Weight 43,50 t dimensions of the machine ca. 3,6 x 3,1 x 6,0 mxmxm height over floor 4,9 mm yom 1987 -> 2018: new electric control Siemens S 7 new ligh guard at the front (Sick C 4000) Pedjvuuf Eepfx Ahvopp permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning, ram interlocking, controllable dependant on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: K100UT22-03, installation height: 1,000 mm, pressing force: 100 t, overall weight: 5,000 kg, clearance between the columns: 1,000 mm, stroke length: 500 mm, power: 18.5 kW (25.15 HP), Equipment: safety light barrier, Working pressure 1000 [kN] Piston stroke 500 [mm] Approach speed 25 [mm/s] , Return speed 35 [mm/s], Work speed 3-10 [mm/s] Work table - space between frames 1100 x 700 [mm] Approximate dimensions L, W, H 1,5 x 2,5 x 4,0 [m] NC control HMI Beijer, Controlling the positions of the top and bottom piston, pressure and speed. Program memory. Manual mode is used primarily for tool setup. The movements are controlled with buttons. FRAME: - Welded steel frame - CNC milled work tables and machine frame - Automatic lubrication of beam guides - T-slots made to measure according to customer specification CONTROL PANEL - HMI touch screen Beijer 10'', - Siemens S7 PLC - Pressure and speed control - Program memory - Remote access for service assistance - Joystick for sensitive adjustment Ppjdstpwu Espfx Ahvep HYDRAULIC SYSTEM - Bosch Rexroth hydraulic components - Hydraulic overload valve - Proportional valve for speed regulation - Proportional valve for pressure regulation - Air cooling

Year of construction: 2011, condition: ready for operation (used), Working surface: 2800x1600mm, swing angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Podpfxeh Nm S Hs Ahvspp

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 700 t, overall weight: 50,000 kg, stroke length: 1,500 mm, Equipment: documentation/manual, Press used for composites, until now it worked in Belgium. In July 2015 the press underwent a thorough modernization, the year of production of the device is 1990, however the modernization was very extensive. The press was used very little, it worked in a research institute. Due to the power cut, I could not check the mileage, but the device looks like new, there are no signs of wear of the working elements. The press is currently in Poland, 63-300 Pleszew, Poland. Ppodpfx Ahjwtbc Tjvop Pressure 700T. Dimensions of the upper foot 180x240. Foot stroke approx. 150cm. The press was used to develop the famous carbon space frame AUDI R8, it worked in a research and development institute near Brussels. Sometimes this device was also used for commercial production. The press looks practically like new. I have full modernization and technical documentation. The device was dismantled by me, in the sale price I add free assembly at the customer's, I will restore the device to the condition it was in before I dismantled the press. The buyer must provide a large forklift (approx. 44T), compressed air, and accommodation for 3 people for 14 days. I offer and pay for a team to assemble the device on site throughout Europe. It is very likely that the device will have to be configured for operation at the new buyer's, this task can be performed for an additional fee by a company from the Netherlands, which carried out a thorough modernization of the device in 2015, the estimated cost of such an operation depends on the buyer's requirements. The transport costs will be very attractive, because I have a friendly company that has very attractive delivery terms for me. The weight of the entire device is approximately 50T.

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm Ppjdpfx Aeb R Addohvep -Weight: 1220 kg