Mesh welder

Ideal GAE 516/07-07-20

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 Ljdpfx Afsqy Ek Ajasrk 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Year of manufacture: 2016 Rated primary voltage U1N: 400 V Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Secondary phases: 1 ~ Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Lodpeyaqzqefx Afaork Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,700 mm, welding power (max.): 600 kVA, wire diameter (max.): 6 mm, type of input current: three-phase, MG950 Mesh Width (Cross Wire Length) for lower feed, single-row: 200 – 900 mm for upper feed, single-row: 200 – 1700 mm for upper feed, double-row (usable width): max. 1530 mm Mesh Length: max. 3200 mm min. 350* mm Distance between the outermost longitudinal wires: max. 1600 mm Longitudinal wire pitch: min. 20 mm Cross wire pitch: min. 10 mm steplessly programmable Clear opening longitudinal wire: min. 15 mm Clear opening cross wire: min. 8 mm Lrjdeym An Ajpfx Afaok Longitudinal wire diameter: 2.0 – 6.0 mm Cross wire diameter: for lower feed: 1.5 – 4.0 mm for upper feed: 2.0 – 6.0 mm Longitudinal wire overhang: max. 300 mm, min. 10 mm Cross wire overhang: max. 300 mm, min. 5 mm Number of individual welding groups ESG: 12 Number of portal welding groups PSG18: 12 Max. number of longitudinal wires: 12

Condition: new, Year of construction: 2025, working width: 2,500 mm, wire diameter (max.): 12 mm, mesh size: 100 mm, 6-12mm Ljdpfx Aexyqg Eofajrk Mesh length 6M Mesh width 2.5M 24 welding point Welding speed 40-70 times/min

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Lrsdexlvn Ejpfx Afask

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Lredpfxewu Dcxo Afaok Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: good (used), Year of construction: 2010, functionality: fully functional, coil weight: 16,000 kg, inner diameter: 640 mm, sheet thickness (max.): 5 mm, working width: 1,500 mm, total length: 24,500 mm, product width (max.): 1,500 mm, Longitudinal Slitting Line YC 180 Technical Specifications: Ljdpfx Afowylavoaerk Line length: 24.5 m Line width: 7.8 m Material thickness: 1.5 to 5.0 mm Max. coil diameter: 1.8 m Coil inner diameter: 640 – 800 mm Max. coil width: 1,500 mm Max. coil weight: 16 MT Installed power: 253 kW Line speed: • At 1.5 mm thickness: 110 m/min • At 4.0 mm thickness: 95 m/min Tooling & Accessories: • Slitting knives – total 186 pcs: Set 1 – 10 mm, Ø307: 26 pcs Set 2 – 14 mm, Ø315: 66 pcs Set 3 – 14 mm, Ø315: 50 pcs New – Ø320: 44 pcs • Rubber rings – total 93 pcs: Set 1 – 25 mm: 31 pcs 15 mm: 12 pcs Set 2 – 25 mm: 31 pcs 15 mm: 18 pcs Set 3 – 25 mm: 31 pcs 15 mm: 18 pcs • Spacers: Slitter knife spacers: 480 pcs Separator spacers: Metal: 252 pcs Non-metal: 369 pcs • Spare slitter shafts: 1 complete set General Information: Manufacturer: Winfos, Taiwan Year of manufacture: 2010 In operation since: 2017 The machine is fully operational and can be inspected in production. Available for dismantling at the beginning of 2026.

Condition: used, Automatic rebar mesh welding machine MCC001 The machine is designed for welding steel reinforcement mesh from previously shortened reinforcements for rods that comply with the EN 10080 standard. Technical data: Diameter of reinforcing bars: 4mm, 5mm, 6mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200mm – 3000mm Minimum step between longitudinal bars: 100mm Pitch of crossbars: 10mm – 999mm Length of crossbars: 100mm – 1250mm Screen moving speed: 0.1m/s – 1m/s Compression force: 60kg – 190kg Productivity: 1 cycle/minute Electricity: Supply voltage: 400V Voltage frequency: 50Hz Connection type: TN-C Power: 100kVA Higher engine power: 0.8 kW Power of one welding transformer: 35 kVa Pneumatic indicators: Working medium: Compressed air Working pressure: 6 bar Ljdpjymcpyefx Afaerk Air consumption: 250 l/min Cooling: Cooling type: water cooling Circulation type: forced circulation Maximum incoming heat carrier temperature: 35 °C Heat carrier consumption: 60 l/min Diameter of reinforcing bars: 4 mm, 5 mm, 6 mm Number of longitudinal bars: 2 – 12 Length of longitudinal bars: 200 mm – 3.000 mm Minimum step between longitudinal bars: 100 mm Pitch of crossbars: 10 mm – 999 mm Length of crossbars: 100 mm – 1250 mm Screen moving speed: 0.1 m/s – 1 m/s Compression force: 60 kg – 190 kg Productivity: 1 cycle/minute Supply voltage: 400 V Voltage frequency: 50 Hz Connection type: TN-C Power: 100 kVA Higher engine power: 0.8 kW Working medium: Compressed air Working pressure: 6 bar Air consumption: 250 l/min Cooling type: water cooling Circulation type: forced circulation Heat carrier consumption: 60 l/min

Condition: ready for operation (used), Year of construction: 2019, This CLOOS QIROX QRC 350-E was manufactured in 2019. It features a maximum payload of 15 kg and a working range up to 4500 mm. Equipped with a QC 2 Master control system, it includes a handheld programming device with an 8.4" touchscreen. The robot supports expansion up to 12 axes and comes with integrated welding software and a digital interface. Consider the opportunity to buy this CLOOS QIROX QRC 350-E welding robot. Contact us for more information about this machine. Extra Information Robotics and Control Unit Max. payload: 15 kg Working range: 0–4500 mm Lrsdpfx Afsx D Hdhsaok Digital inputs/outputs: 16 Serial interface: Yes CAN bus: Yes USB interfaces: 2 Flash memory: 8 GB Buffer module: 24 V Expandable to up to 12 axes Welding Technology Power source: Included Welding interface: Integrated Welding and function test: Included Torch cleaning: CMR-8-C torch cleaning device, upright Robotic welding torch: Included Sensors Tactile sensor: Yes Arc sensor: Included Technical Data of Workpiece Positioner Load capacity: 10 kN Nominal torque: max. 1600 Nm Tilting moment: max. 8800 Nm Mass moment of inertia: 900 kgm² Rotation range: +,- 360° Swivel range: 370° Welding Fume Extraction Extraction capacity: 3000 - 4320 m³/h Motor power: 5.5 kW Connection voltage: 3 x 400V/50 Hz Noise level: 65 dB(A) Weight: 640 kg Dimensions (W x D x H): 1413 x 1413 x 2110 mm

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, wire diameter range: 1,5 - 7,0 mm cutting length: max. 3.000 mm wire feeding speed: 5 - 120 mtr./min * machine is equipped with chamfering unit by grinding* Lodoyxgtuepfx Afajrk