Reach truck

Hyster R 1.6H 7.5m 1600kg Reachtruck

Condition: refurbished (used), functionality: fully functional, total width: 2,500 mm, total length: 7,000 mm, total height: 2,600 mm, The following applies to used equipment that undergoes a general overhaul: - New polyamide guide sleeves and sliders - Electrical systems and control elements are completely renewed and brought up to the 2026 technical standard - Complete replacement of hydraulic hose lines in the press and aggregate - Cylinders are reconditioned with new seal kits - Valid UVV/E-Check for 1 year - Steel structure is renewed if necessary Lsdpfezazirox Af Sjrt Any special equipment is available upon request. The images shown are sample images of machines that have already been sold. Every inquiry or offer is tailored to the customer and their requirements.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. Lodov Sa I Tepfx Af Sert It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: used, functionality: fully functional, machine/vehicle number: F222E01655W, Year of construction: 2022, operating hours: 4,500 h, load capacity: 46,000 kg, lifting height: 15,190 mm, fuel type: diesel, mast type: telescopic, construction height: 4,700 mm, power: 240 kW (326.31 HP), empty load weight: 71,900 kg, drive type: Diesel, Full Container Reachstacker Chassis number: F222E01655W Mast type: Telescopic Transmission: SOH TE-30 Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Pneumatic Front tires size: 18.00-25 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 18.00-25 Lrodpfjx H U R Rox Af Sot Rear tires condition: 40 - 60% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container handlers, reachstackers, forklifts, and terminal tractors in stock at our Oldenburg warehouse. Visit our homepage - hinrichs-Forklifts. Leasing, hire purchase, and financing under fair conditions are always possible for us. We also gladly purchase your used equipment outright, even if you do not buy a vehicle from us. Please call me, Marco Levermann, for detailed advice on this MAKE - MODEL. By the way: Our forklift specialist workshop is specialized in the repair and maintenance of large machines from 8 tonnes upwards. We also gladly offer to sell your vehicle on consignment. Central lubrication, Movable cabin, full cab, air conditioning, joystick, camera, extra seat.

Condition: new, Bernardo swivel bending machine with segmented upper, lower, and bending beam TB 1020 Flex Working length 1020 mm Lsdpfjd Hxm Iox Af Sort Max. sheet thickness (400 N/mm2) 2.0 mm Max. opening width with segments 48 mm Max. opening width without segments 150 mm Max. clearance height closed 125 mm Bending angle 0 – 135° Back gauge 600 mm Working height 900 mm Width 1400 mm Depth* 1070 mm Height 1260 mm Weight approx. 430 kg * with back gauge Features Piano inserts in the upper, lower, and bending beam provide a large number of bending possibilities. Casing and special profiles with opposing bends can be easily produced with these models. Universally applicable bending machines for sheet metal workshops and repair shops. Simple swiveling movement of the bending beam via a handle. Easy adjustment of the upper beam for efficient work. High upper beam for producing high-flanged profiles. Large-sized flat guide for precise work. An auxiliary cylinder supports the bending process during hemming. Scope of delivery Segmented upper, lower, and bending beam Back gauge Corner segment left / right each 75 mm | 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 200 | 270 mm

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Lredemw Ui Ropfx Af Sot Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V Lrsdpfxortrvys Af Sot -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: new, Year of construction: 2026, functionality: fully functional, Grinding Wheel Dressing Machine: Easy to Operate, Robust, and Precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of easy operation and exceptional stability. The solid granite bed ensures the highest precision and durability, while the user-friendly operation maximizes efficiency in your workshop. Lsdpsubbrtefx Af Sert While you continue production on your tool grinding machine, our dressing machine saves you time and, therefore, money. Ideal for those who value reliable performance and top value for money!

Condition: good (used), For sale: - Injection molding machine, EPS pre-expander, automatic line for EPS (expanded polystyrene) box production – thermo boxes, fish boxes – used, in very good condition. The machine is currently still connected to the installation, which facilitates disassembly and labeling of individual connections for the buyer. - Complete machine, ready for connection to steam installation, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mold for the production of EPS thermo boxes and fish boxes, 3 sizes, with or without holes, with lids – total of 6 configurations. Complete boxes with lids are produced in a single cycle – no need to change molds. - Set includes intellectual property rights to the box and fish box designs – full documentation provided. IMPORTANT! The machine can also be used to produce EPS construction shapes for walls, ceilings, etc. – see examples in one of the photos. We also have other production line components available. Check our other listings. We also have additional equipment for sale such as: - Injection molding machine, EPS pre-expander, automatic line for EPS foundation boards + mold for boards - EPS batch pre-expander - Steam installation: boiler house – machinery - 3 m³ steam tank - Installation for transporting expanded EPS - EPS silos - EPS crusher Ledpfx Aoua Dqief Sjrt - Many spare parts Additional photos and information available upon request by email. Option to sell individual components of the set separately.

Condition: like new (used), Year of construction: 2004, WEINIG UNIMAT SUPER 4 planer – German production - very good condition – year of production 2004 – DTR Lodsin Nrgopfx Af Sjrt TECHNICAL PARAMETERS: planing width 150 mm planing height 50 mm spindle diameter 40 mm equipped with tools upper adjustable head 1) lower head 11 kW 6000 rpm 2) upper head 18.5 kW 7000 rpm 3) lower head 5.5 kW 6000 rpm feed motor 2.2 kW feed adjustable on the inverter 0-18 m/min feed on cardan shafts pneumatic clamp three upper steel-plated pulling rollers one rubber top roller grooved top pre-top length 1950 mm total power 37 kW central lubrication Transport dimensions: length/width/height 320x220x220 cm weight ~ 2700 kg

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Ljdpfxsxfrv Eo Af Sjrt Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Seller CNC Top Ten bv Coevorden, Netherlands