Forklift

Hyster H250E

Condition: used, functionality: fully functional, machine/vehicle number: B7E 2191-T, load capacity: 9,000 kg, lifting height: 6,130 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,300 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 15,900 kg, color: green, Equipment: sideshift, Spare brake shoes available 3rd valve Hjdpfoxhgydex Ab Iek

Condition: good (used), Year of construction: 2016, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Make: MAZAK Type: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Hedpfoyrcxlsx Ab Iek Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e Hsdpfsx D R Rrsx Ab Iok • Chip conveyor • Clamping wedges for tools

Condition: used, Roll Forming Line for Drywall and Zinc-Coated Door Frame Profiles General Description: Complete roll forming line designed for the production of zinc-coated steel profiles used in drywall structures and door frame systems. The machine processes galvanized steel strips with thicknesses typically ranging from 0.6 mm to 1.0 mm, featuring quick roller adjustment depending on the required profile type. Profiles Produced - Drywall Profiles: • Galvanized Tracks: width 57 mm and 77 mm, height 35 mm, sheet thickness 0.6 mm • Galvanized Studs: 39×55 mm and 39×75 mm, sheet thickness 0.6 mm • U-Shaped Profiles for False Ceilings: 27×60×27 mm, sheet thickness 0.6 mm • Offset Profiles for False Ceilings: 20×29×28 mm, sheet thickness 0.6 mm - Zinc-Coated Door Frame Profiles (10/10 mm): • Complete range from ART. 201 to ART. 217, including L, U, Z and special shapes • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable configurations available Technical Features Hedpfx Abjxnmyqo Iek • Material thickness: 0.6 – 1.2 mm • Strip width: variable, depending on profile • Number of forming stations: 19 • Rollers: hardened and ground steel rollers • Drive system: independent motorization for each roller group • Feeding speed: adjustable • Cutting unit: automatic flying shear or saw • Optional units: punching, slotting, or quick-change tooling systems

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 43 h, load capacity: 3,200 kg, lifting height: 10,000 mm, fuel type: diesel, mast type: telescopic, power: 79 kW (107.41 HP), empty load weight: 7,330 kg, drive type: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 Condition: New machine Technical condition: New Tyre type front: Pneumatic Tyre size front: 400/70-24 Tyre condition front: 80 - 100% Tyre type rear: Pneumatic Tyre size rear: 400/70-24 Hedpfsw Eqddex Ab Iok Tyre condition rear: 80 - 100% Description: Hydraulic adapter for Manitou 2550 3rd hydraulic circuit, 4th hydraulic circuit, rear work lights, front work lights, heater, full cab, air conditioning, CE certificate, exterior mirrors, joystick, beacon, windscreen wiper, LED. Specifications: - Approval as a tractor with possible trailer operation - 20.0 t with 7-pin trailer socket - Fixed Dieci tool carrier mounting plate with double hydraulic quick coupler operated from the cab for attachments, including hydraulic coupling (Forks require an adapter plate for use with quick-change system). Hydraulic single-lever control unit with proportional simultaneous control (flow-sharing). Close-centre system including pressure relief kit for: - Lifting capacity 3,200 kg - Lifting height 8.65 m - Engine KUBOTA 79.5 kW (107 hp) - Displacement 3,769 cm³ - Emissions standard Tier 4f - Steering modes: all-wheel steering, crab steering, front-wheel steering - Rear hydraulics - 40 km/h - Air-suspended seat - Mounting plate with hydraulically operated quick coupler - Steering control warning light.

Condition: good (used), Truck crane Renault 270 DCI 19 tonnes Year : 2002 470.000 km Echange standard engine done at 250 000 km Crane capacity : 5,5 tonnes Technical check : OK Pas de télécommande de la grue Hsdjrhzy Hspfx Ab Ijk

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 44 h, load capacity: 4,500 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Hjdpfxjw Eqc Hs Ab Iok Condition: New machine Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 ICARUS 45.17 DYNAMIC ST.V IT 1 ST ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval 20 KM/H (only for Germany) - Automatic 45% locking differential on the second axle Hydraulic single-lever control unit with proportional and simultaneous control (flow-sharing). Open center system Wheel set#400/70-24#Power CL Michelin with mudguards Fixed Dieci equipment carrier plate Boom swing damping (Not compatible with basket pre-equipment) Standard heating Air suspension seat Indicator light correct steering Set car radio preparation Cab comfort kit (sunshade ,rear storage net, dual USB port) Standard rear view mirror right and left FNR lever under the steering wheel - Rear view camera, integrated in the machine's display. LED headlights on boom head Two rear swivel LED work lights on cab LED work lights (1 on the right side, 1 on the left side, 1 at the rear) Road headlights (front) with LED daytime running lights. Rear-view mirror 7-pin trailer socket. Pair of floating forks 120 x 50 mm, L = 1200. 5.0 t load capacity

Condition: excellent (used), Henri Hauser M5 DR jig boring machine spindle diameter 90 mm x-travel 700 mm y-travel 500 mm Drilling capacity in steel 40 mm spindle mounting MK 4 drilling spindle stroke 170 mm number of spindle revolutions 2 infinitely variable 10-2000 rpm Boring diameter max. 230 mm Table dimension - longitudinal 900 mm Table dimension - crosswise 770 mm Vertical travel of cross beam 630 mm Drilling spindle 6 pieces from/to 0.02-0..20 rpm Clearance between uprights 900 mm Passage between spindle and table 815 Spindle motor 4.0 HP Total power requirement 380 V Machine weight approx. 3.9 t Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines Financing through our bank is also possible. Hjdog Ibuxepfx Ab Isk komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 116 h, load capacity: 4,000 kg, lifting height: 17,000 mm, fuel type: diesel, mast type: telescopic, power: 85 kW (115.57 HP), empty load weight: 13,040 kg, drive type: Diesel, Rigid telescopic forklift Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Air Front tires Size: 400/70-24 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Size: 400/70-24 Rear tires Condition: 80 - 100% 3rd valve, 4th valve, heating, full cabin, CE certificate, Hedpfxev Ezt Ds Ab Isk Specifications: -Carrying capacity 4000kg -Lifting height 16,4m -MAX gradeability 40% -Curb weight 13040kg -Engine KUBOTA 85,1kw ( 114hp ) -Capacity 3769cm3 -Emission standard Tier4f -Steering Front wheel steering, all wheel steering and crab steering.

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Hodpfovyqbmex Ab Iok