Edge banders Homag Edgeteq S 200 2018 Premilling

Homag

Condition: ready for operation (used), Year of construction: 2021, machine/vehicle number: 0-201-71-5926, For sale as part of an insolvency administration: Kljdpfozfyxnox Ah Eou 5-axis CNC woodworking center Homag Centateq P-500 Profi BMG511/60/15/F/A, Year of manufacture 2021, with Homag control system, Widescreen TFT monitor Dell and accessories. Please contact us to arrange a viewing appointment.

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 1,400 h, power: 11.5 kW (15.64 HP), workpiece height (max.): 50 mm, edge thickness (max.): 8 mm, total length: 5,860 mm, Single-sided edge banding machine, right-handed version For hot-melt adhesive bonding. Quick-change adhesive unit for hot-melt glue. Can process PU adhesive granulate in compliance with adhesive processing regulations. Glue reservoir positioned leak-proof below the glue roller. Precisely metered glue application to the workpiece via glue roller; no adjustment required for varying workpiece thickness. Selectable glue roller rotation: co-rotating or counter-rotating direction. Kledpfx Ahoyud S Ej Esu Glue temperature monitored via electronic thermostat. Automatic glue temperature reduction during work breaks. Infrared hot-melt adhesive activation. Automatic edge magazine for rolls and fixed lengths, including roll holder, Ø 800 mm. Equipped with reinforced pre-cutting shears for thick PVC/ABS, max. 3 x 45 mm. Centrally adjustable top pressure. Control panel at machine infeed. Electronic control system: power control PC 20+ BRANDT control system with color graphics user interface for easy and convenient operation and programming. Technical details: - Tiltable operator panel at machine infeed - Durable short-stroke membrane keyboard - Color graphic flat screen - Industrial PC with Compact Flash disk as mass storage - Aggregated function keys with LED status indicators - Color pictograms to assist user navigation - Online language switching between various foreign languages - Display of essential machine target and actual states - Status messages in plain text - Easy selection and correction of position points - Simple axis adjustment (with suitable unit configuration) - Online help in plain text via accessible help menu - Production data acquisition for production time, edge length, and workpiece count—daily and total values - Inspection and maintenance interval display - Remote service capability via integrated modem and installed service software - Save processing programs - Production according to processing programs - Data backup of processing programs

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit Kjdpfx Aszdzmkeh Ejlu MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: excellent (used), Year of construction: 2007, Used CNC machining center Manufacturer: Homag Type: BOF 311/40/F/K Year of manufacture: 2007 Special features: 5-axis spindle with 15 kW "Drive 5+" (incl. vibration sensor) Workpiece thickness 300 mm incl. clamping device Kljdpfozdydzox Ah Eju WoodWop 8.0 incl. Windows 7 computer 5-axis CNC cross-support machine; Cantilever table with 8 adjustable consoles, each with 2 suction cups, side and longitudinal stop bolts, LED position display for vacuum suction cups 6 sets of extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units individually 4000 mm, pendulum max. 1550 (1375) mm Workpiece diameter 25 mm: individually 3475 mm, pendulum max. 1915 mm -Workpiece width: stop at the front: 1450 mm for all units / 1525 mm with workpiece diameter 25 mm Stop at the rear: up to 1600 mm / 1730 mm – Workpiece thickness: – Max. 300 mm including clamping device – Up to max. 60 mm with standard clamping device SAFETY AND PROTECTION DEVICES: EC compliant; SAFETY GUARD ON THE RIGHT WITH DOOR Left and rear: wall installation! Support equipment: 15 kW Drive5+ spindle and 30-position tool changer (chain) up to 24,000 rpm, vibration sensor Pick-up location for saw blade 350mm diameter Drilling head with 25 spindles (V19/H6/S0/90°) AGGREGATE INTERFACE DRIVE5+ Chip conveyor belt TOOL TRANSFER LOCATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 140 M3/H Control system: POWERCONTROL PC85 with PLC CONTROL SYSTEM; WoodWop Version 8.0 WOODWOP-CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL SYSTEM TEXTS: GERMAN Delivery includes only the tools and HSK tool holders shown in the pictures!

Condition: good (used), Traypacker / wrap arround packer Trays and wrap-around boxes minimum packaging size L x W x H = 190 x 140 x 80 mm maximum packaging size L x W x H = 460 x 350 x 250 mm Klodpfsfxypisx Ah Esu 4 lane machine Hotmelt machine was rebuild in 2018 siemens s7 plc controlled easy format change as-is or adjusted to customer needs

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edge banding machine, manufactured in 2021. The delivery also includes a KOGI dust extraction unit in a two-bag configuration with 2.2 kW power and 1,650 Pa suction capacity. The machine is additionally equipped with a glue pot for special applications. A valuation report (PDF) is attached. Processing units Joint trimming / pre-milling unit Corner rounding unit Radius scraper Glue scraper Buffing / polishing unit PUR-capable (PUR-ready system) Technical data Required air pressure: 6.5 bar Total machine length: 4.8 m Current operating hours: 460 h Machine data Type: EDGETEQ S-240 PROFI KDF 230 Serial number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum current at full load: 17.3 A Fuse rating: 20 A Short-circuit current: 5 kA Control voltage: 24 V Klsdpfjy Exwfjx Ah Eou Protection class: NEMA 1 Largest motor current: 4.6 A Highest heating current consumption: 2.3 A Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: used, Year of construction: 2021, input frequency: 50 Hz, input current: 21 A, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm Kedpfjy Extmox Ah Ejlu PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse rating: 25 A Control voltage: 24 V The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. Klodpfjy D A Swjx Ah Esu POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Ksdpozdklcofx Ah Eelu Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Kledpfxozdki Us Ah Eeu Powertouch screen Woodwop for machine Energy Saving Mode

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Kjdoy Ih R Tjpfx Ah Eslu with electric motor-driven height and tilt adjustment for the main saw blade, dimension entry via keypad digital display of tilt angle and cutting height CE version Cutting length 3000 mm with central and end position locking Cutting width 1000 mm with digital display and fine adjustment Cutting height up to 175 mm with a saw blade diameter of 500 mm (the scorer must be removed for this) Motor 5.5 kW with 4 speeds 3/45/6000 rpm manually adjustable with automatic brake and digital speed display 2-axis scorer with electric motor-driven height and lateral adjustment Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) Ksdpfjzdignex Ah Ejlu • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Scraper unit Klodpfx Aezdidaoh Eou • Buffing unit

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Colour: Grey Weight: 1.250 kg Price: On request Kljdpfxsyu Thcj Ah Esu - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: reconditioned (used), functionality: fully functional, Flat- or glue joint scraping unit Used unit, not reconditioned, without warranty Klodpfxstywuke Ah Eju - For removing of glue residuals or leavings from the panel surface in the area of the glue joint. Specification: - consisting of one top and one bottom unit, individually adjustable. - top unit synchronized with top pressure in vertical direction - version with 3 small tracer rollers, individually adjustable, for smooth passage at front and rear edge of panel. IMPORTANT ANNOTATION: version with pneumatic cylinders for lateral cut-in/out controlled by selection of the individual unit in the main control is currently not available. But it is possible to retrofit this feature. Please ask for our quote. Installation and set-up of the unit at your machine is also possible.