Suction lifter

Hegla F-G II

Condition: good (used), 1 used surface grinding machine Manufacturer: Jung Model: HF 50 Technical specifications: - Z-axis travel: 400mm - X-axis travel: 500mm - Y-axis travel: 200mm - Table length: 720mm - Maximum spindle speed: 4000rpm - Table width: 200mm - Minimum spindle speed: 1000rpm - Transport dimensions: 2300mm x 1500mm x 1700mm (L x W x H) - Transport weight: 2000kg Gsdpfxsxgbb Ts Ahkoiw Equipped with: - Digital readout - Diaform device

Condition: good (used), Year of construction: 1992, Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg Godol Tuvdepfx Ahksiw -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min Gedpfx Aefx Hv Hjhkoiw table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Year of construction: 1996, Vollmer CHC 260 Year of manufacture: 1996 Gisdpfx Aeyuc Ifohkjw

Condition: excellent (used), functionality: fully functional, mileage: 638,700 km, first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, Year of construction: 2019, Equipment: ABS, Bluetooth, EBS, USB port, additional headlights, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, Single-owner vehicle, always serviced exclusively at an official DAF workshop, with full, certified invoices and documentation available. Features: High-roof cab, alloy wheels, metallic paint, stainless steel side bars, PTO/hydraulic system, independent air conditioning, leather interior, manual gearbox, fitted with spoiler, alloy wheels, hydraulic system, in-cab TV, independent climate system, spare wheel, retarder, leather interior, front tires /55, rear tires /70. REGULARLY SERVICED WITH CERTIFIED AND GUARANTEED MILEAGE. Leasing and/or financing options available up to 60 installments, with the best rates available on the market. 12-month warranty available on request. The vehicle description may contain discrepancies compared to actual features, which must be checked on site. This listing does not constitute a contractual obligation under any circumstances. For further information or clarification, please contact the numbers provided, including via WhatsApp Direct. Mr. Paolo Antonio Gorgoni Gedpsyg H Rujfx Ahkjiw Photo documentation is taken on-site at our locations, so the photos are genuine and show the current condition of the vehicle. Please also note that the system automatically displays equipment and accessories, which may lead to some discrepancies. To ensure maximum accuracy, we invite you to always verify features and specifications directly with us.

Condition: good (used), • Electronic 11-spindle edge grinder and polisher for flat edges and miters, right-to-left operation Gsdperhilxofx Ahkjiw • Edge angle 0 to 45 degrees • Type: TL 11 AV • Serial number 497-01 • Machine configuration o 2 x 150 mm diamond wheels for edges o (2) polishing wheels (150 mm) o (2) polishing wheels (150 mm) o (1) cerium-impregnated wheel o (1) 150 mm diamond wheel for rear hem o (1) 150 mm polishing wheel for rear hem o (1) 150 mm diamond wheel for front hem o (1) 150 mm polishing wheel for front hem Special price €6,500

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Type: ILS RBL 80/12 Year of manufacture: 2016 Giedpfx Ahsht Rl Ejkow Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: used, Year of construction: 2007, Suitable for the automatic processing of PCD-tipped milling cutters, shank tools, disc-shaped tools such as Saws, milling cutters etc. using the wire-electro-erosion method. Accessories: Total enclosure, Cooling unit for dielectric, automatic fire extinguishing system, Mist extractor N181 Gsdpfx Aowtmg Dshkoiw Probe, Machine lamp, automatic central lubrication, Workpiece carrier ISO50, Measuring mandrel, Cutter outside diameter: Max. 250 mm Cutting length: max. 260 mm Shank tool diameter: 10 - 250 mm Outside diameter disc-shaped tools: Max. 250 mm Tool weight max.: 20 kg X axis travel: 275 mm Y-axis travel: 300 mm W-axis travel: 200 mm A-axis mounting cone: ISWO 50 E-axis swivel range: 180 ° Required space for the machine: 2535 x 2200 x 2220 mm Weight approx.: 4500 kg Connected load: 4.5 kW (400 V / 50 Hz) colour: gray RAL 7045/7047

Condition: excellent (used), Year of construction: 2016, 5 axes CNC glass working center for max. glass sizes 4050 x 2300 mm machine fro grinding , milling , drilling , bevelling 0-90° , engraving and sawing max. thikness peripheral wheel : 80 mm Godpfx Aev U Abzehkoiw electro spindle : 15 Kw electro spindle spindle speed : 12000 rpm 2 x 14 positions rotating tool change store left + right + 8 postions tool change on heads board ( next to the electro spindle ) tool rack iso 40 weight : 7500 Kg

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min Giodpfx Aju Nigkohksw cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *