HEBROCK AKV 3005 DK-F

HEBROCK AKV 3005 DK-F

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Dsdpjxyiilsfx Ah Iskn Storage location: Nattheim

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw Dkodpfxjx S Hmzs Ah Isn - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: good (used), Year of construction: 2004, Used edge banding machine Model Hebrock AKV 3005 DKF Year of manufacture 2004 Direct glue application to the workpiece Including jointing unit Support divider for edge material High-frequency cut-off saw Chip collection box (cut-off saw) Pneumatic roller trimming Control panel, PLC control Transport chain with permanently screwed special chain plates Double roller pressure (ball-bearing mounted) Outrigger (extendable to the front) Automatic central lubrication (cut-off saw, corner router) Quick-heating glue tank (maintenance-free, Teflon-coated) Maintenance-friendly and user-friendly design Corner router Profile drawing blade unit Dksdpfx Asyyw Tzsh Ion Surface drawing blade Chip collection box (drawing blade) Max. edge thickness 8 mm Min/max. workpiece thickness 10 / 40* mm Min. workpiece length approx. 200* mm Min. workpiece width approx. 70* mm Feed rate approx. 10 m/min Ready for operation in approx. 6 minutes Max. power consumption 12 kW Electrical connection 400 V / 3 phases / 50 Hz Dimensions (length x width) 5000 x 1445 mm Dimensions (height) 1620 mm Weight 1400 kg

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Dodsnxkm Espfx Ah Iskn Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Dkjdsw Nx A Ijpfx Ah Ijn Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, Year of construction: 2024, table length 2000 mm table width 1000 mm stroke height 400 - 1010 mm Dkedpfx Aov Htkdsh Ijn weight max. in kg 300 kg weight of the machine ca. 220 kg

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Max. workpiece height approx. 40 mm Min. workpiece length approx. 250 mm Min. workpiece width approx. 70 mm Feed rate approx. 11 m/min Ready for operation in approx. 4-5 min. Power consumption approx. 11 kW With heated infeed fence With quick-heating glue pot Pneumatic roller end trimming up to 3 mm With cross-cut saw for edge thicknesses up to 5 mm Milling station optionally equipped with combination indexable insert cutters Dksdpfx Aowka Tloh Ijn for radius, straight, and chamfer milling Outrigger, foldable and extendable to the front With undercarriage With integrated extraction system Dimensions (L x W x H): 3600 x 1400 x 1200 mm Weight approx. 670 kg Availability: short-term Location: Flörsheim

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Dodpfx Ajtnf Iujh Iekn

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Dkodpfsytrf Rox Ah Ien Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm Dedpfx Ahsxymfwe Iekn - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Location: Baden-Württemberg