Temperature control unit

HB-THERM Series 4 HB-140 U1

Year of construction: 2005, condition: used, Temperature range 140 °C heating capacity 8 kW Cooling capacity 30 kW range L-W-H 0,70x0,20x0,50 m weight of the machine ca. 48 kg HB-Therm HB-140 U1 Series 4 Temperature Control Unit – Water up to 140°C Cjdpfozpbiiex Amasrf --> Definition and structure

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Drive force of the moving platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Daylight opening (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Crsdpfxoxu Uvas Amasf Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mold weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed Standard / Option: 1/min 285/349 Screw speed Standard or Stage 1: 95 PS Screw speed Option or Stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticization: 1 complete thermoplastic plasticization unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 3826ä

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Extras – complete machine data sheet attached as PDF document Cedpfx Amoyf Uy Ujajrf Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Year of construction: 2010, condition: used, HB THERM 140 Z 2 (2010) 16KW Measurement range 0–400 °C Resolution 0.1 °C Regulation accuracy ±0.1 K Tolerance ±0.8 K Flow measurement Measuring range 0.4–40 l/min Resolution 0.1 l/min Regulation accuracy ±0.1 l/min Cedpfx Amev H Ad Hjaerf Tolerance ±(5% of measured value + 0.1 L/min) Pressure measurement Value Unit Measuring range 0–20 bar Resolution 0.1 bar Tolerance ±5% of final value Technical data O8360-CS 2023-08 25 3.2 Emission value unit Permanent sound pressure level 55 °C 3.3 Operating conditions Temperature range 5–40 °C Relative humidity* 35–85 % RH Minimum free space (→ picture) A 10 mm B 50 mm C 150 mm D 50 mm E 70 mm

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Codpfx Ameyak Ecsaorf Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: excellent (used), Year of construction: 2017, Krauss Maffei KM 350-3000 CX injection molding machine Year of manufacture: 2017 Fully hydraulic clamping system. MC6 control system based on industrial PC technology with real-time Ethernet, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running processes (ProcessDesigner). Plasticizing unit Complete plasticizing unit for thermoplastics, with abrasive protection, 80 mm screw diameter, equipped with a backflow valve and an open nozzle. TECHNICAL DATA OF THE MACHINE – STANDARD VERSION Clamping unit Clamping force: 3500 kN Codpfx Amoy Tp Rloasrf Opening force: 221 kN Dimensions of the mounting plates (h x v): 1060 x 1095 mm Distance between columns (h x v): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold height: 380 mm Maximum opening width: 1300 mm Ejector stroke: 250 mm Ejector force front/rear: 95/49 kN Injection unit Screw diameter: 80 mm L/D ratio: 20.0 Injection pressure: 1855 bar Injection volume: 1608 cm³ Injection weight: 1464 g Injection speed: 95 mm/s Injection rate: 478 cm³/s Standard screw speed: 220 rpm Plasticizing rate: 109.5 g/s Electrical and hydraulic equipment Rated power of the pump motor: 75 kW Installed power of the heaters: 36 kW Number of heating zones in the cylinder: 7 Dry cycle time / stroke according to Euromap 6: 2.3 s / 497 mm Oil tank capacity: 720 dm³ Dimensions and weight Net weight including control cabinet: 16.3 t Machine dimensions (l x w x h): 7.21 x 2.17 x 2.25 m