Circulation pump

GRUNDFOS PUMP 32-30F

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Hjdpjqgfbgsfx Ahvoi

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 Hedpfx Asq U R T Nehvsi No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Hsdpfspugwisx Ahvji Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm Hedpfeuif Iusx Ahvsi The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals

Condition: new, Year of construction: 2023, power: 630 kW (856.56 HP), rotational speed (min.): 1,491 rpm, input frequency: 50 Hz, overall weight: 3,300 kg, Electric Motor Hodpfxexwfgbs Ahvji Manufacturer: ABB Model: M3BP 400LKB 4 IMB3/IM1001 Power: 630 kW Year of manufacture: 2023

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, available immediately - Capacity: 18,000 liters - Tmax: 450°C Hodpeu Hma Nefx Ahvsi - Internal dimensions (L x W x H): 4100 x 2100 x 2100 mm - External dimensions (L with rails x W x H with lifting door): 9970 x 3060 x 6110 mm - Control system: Eurotherm Nanodac - Temperature stability (at nominal temperature without load): ±5 °C - Automatic supply and exhaust air dampers - Electric lifting door - Electrically driven bogie hearth - Power rating: 247 ± 9% kW - 400 V, 50 Hz - Documentation, CE declaration We are happy to offer installation, commissioning, and training for your staff. Please contact us! We supply new and used industrial furnaces. Inspection in our warehouse available on request! Furnace, furnaces, annealing furnace, kiln, hardening furnace, heat treatment oven, oven, tempering furnace, baking oven, drying oven, industrial furnace

Condition: good (used), Driven and non-driven roller conveyor SSI Schäfer - Partially accumulating roller conveyors - Various lengths available and customizable to your individual warehouse project - Clear width: approx. 460 mm - Infeed and outfeed conveyors available Hjdpfx Aogpw Rnshvsi - Roller conveyor curves available Large numbers of driven and non-driven roller conveyors in very good condition available. Please refer to the attached pictures for further information. The drawings represent the current state of construction, but this can of course be changed. We are happy to help you with transportation! Payment is made exclusively by: - bank transfer - prepayment Prices are net prices (plus VAT) You will of course receive an invoice with VAT shown. Please also note our other advertisements. Didn't find what you were looking for? Do not hesitate to contact us.

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Hodpfxetmqi Do Ahvsi The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from KHS Krauss Maffei KM 1000-5000A injection molding machine -Pump 1: Voith type IPH 6/5-125/50 300 bar Hodeg Avqcspfx Ahvsi -Pump 2: Voith type IPR/H 6/5-125/40 210/300 bar -Drive: Loher 75 kW 1500 rpm -Individual components: filters/valves, see photos -Dimensions: 2285/800/H900 mm -Weight: 1132 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Filling system consisting of the following components: 1. Cross Trough: Trough width: 2.8 m Trough height (lower side): only 0.8 m Trough depth: 1.2 m incl. protective grid on top incl. 3 kW gear motor left and right versions available Optional: chassis, forklift adaptation, .... 2. Inclined Screw Conveyor: Length: 2 m (other lengths available upon request) Variable inclination incl. 3 kW gear motor 3. Feed Screw: Length: 2 m (other lengths available) Open on the end face All screw conveyors have a diameter of 200 mm and are continuously welded onto a steel tube! (Larger screw diameters also available upon request!) Without wiring and control system We are also happy to offer you custom-made designs! Hodpfx Aovrcfushvei Prices excl. VAT.