GALEN Coil Tong

GALEN Coil Tong

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Capacity: 32 M.T. Jaw Aperture(min-max): 160mm/2400mm Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Axial Rotation Time: ~30 sec Gujdpfx Aspa Rmkongeh Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Condition: used, Saw BEHRINGER HBE 321 A Dynamic Gsdpfx Ansx Tvkxegjuh

Condition: used, functionality: fully functional, Year of construction: 1997, 2 units Figee overhead crane, 35 tons, with swiveling hook, span approx. 18.60 m, and one unit approx. 21 meters, lifting height 10 meters. Gsdpfxow S D Izs Angsuh

Condition: used, Year of construction: 2000, Manufacturer: STAM Model: Stam 2000-3 Year: 2002 Condition: Used Stock number: 0395 Uncoiler – max. weight (ton): 30 ton Uncoiler – max. width (mm): 2,000 mm Uncoiler – min. width: 400 mm Uncoiler – outer coil diameter: 1,800 mm Uncoiler – hydraulic expansion: 508 mm min. 610 mm max. Straightener – strip width: 2,000 mm Straightener – max. strip thickness: 3 mm Straightener – min. strip thickness: 0.6 mm Straightener – number of rolls: 17 Straightener – roll diameter: 46 mm Guedpfxsywd Ako Angjh Electronic feeder – min. pitch: 250 mm, max. pitch: 4,000 mm.

Condition: excellent (used), functionality: fully functional, strip width: max. 1.600 mm strip thickness: 0,4 - 3 mm No. of strips: max. 11 coil weight: max. 25 t Gjdpfx Anjy Nypkjgjuh coil OD: max. 2.000 mm mandrel Ø: 508/610 mm year: 1990/2002/2006/2016/2019

Condition: good (used), Year of construction: 2018, Burning and Drilling System Plate Processing Center Manufacturer: Vernet-Behringer Gusdpjvzrczefx Angeh Type: MAG EVO 420 Year of construction: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic turret Tool holder: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC feed carriage, positioned to the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute into a material collection container for unloading small parts. Filter unit incl. piping Powerful for use with carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 121026ä Availability: immediate!

Condition: good (used), Year of construction: 2018, MACHINE STRUCTURE 2500X12000mm HEXA GV500 NUMERICAL CONTROL HEIGHT CONTROL PLASMA BEVEL HEAD 6-TOOL REVOLVER ISO30 DRILLING MACHINE INCLUDED: HYPERTHERM 400A GENERATOR NEW Gusdpeq Abwpefx Angsh WARRANTY 6 MONTHS

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 750 mm cutting width 170 x 310 mm cutting speed 25 - 90 m/min 130 mm 130 mm 205 mm Impact energy 205 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Gedpfx Anspam E Rsgjuh Solid band saw - Double miter cuts on the right up to 60°, on the left up to 45° - AutoCut - Vice with quick clamping device - Belt tension control - Electric automatic cooling system - Material stop max 600mm

Condition: good (used), Year of construction: 1997, operating hours: 30,475 h, functionality: fully functional, machine/vehicle number: 8277, total height: 3,355 mm, total length: 6,200 mm, total width: 3,920 mm, input voltage: 400 V, type of input current: three-phase, UNISIGN CNC bed milling machine UNIVERS 5, year of manufacture 1997 Control system: Siemens 810 MGA 3 X-axis travel: 4000 mm Y-axis travel: 750 mm Z-axis travel: 400 mm Feed rate: 5 - 28,000 mm/min Rapid traverse rate X-axis: 28,000 mm/min Rapid traverse rate Y-axis: 28,000 mm/min Rapid traverse rate Z-axis: 28,000 mm/min 51 tool changer positions SK 40 DIN 69871 A / ISO 7388-1 T-slots 1 x 18H9 / 4 x 18H12 T-slot spacing: 130 mm Maximum table load: 1,000 kg 400V / 3 phases / 50Hz / 60A Power consumption: 40 kW Air pressure: 6 bar - 20 ltr/min Number of leveling elements: 8 pieces Gjdpfsylbf Rsx Angeuh Operating hours: 30,475 hours Dimensions: 6200 x 3920 x 3355 mm Weight: 12,000 kg

Condition: good (used), Year of construction: 2012, cutting diameter 260 mm saw band length 3.180 x 27 x 0,9 mm mm capacity 60 degrees: square 260 x 260 mm capacity 60 degrees: flat 320 x 260 mm cutting length min. 6 mm cutting speed 12 -120 m/min Control KASTO BasicControl total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. LBH 2,37 x 1,35 x 1,77 m Sawing hours: 2,860 h. Includes 3-meter infeed roller conveyor Includes coolant system Includes spray gun for machine cleaning Fully hydraulic, high-performance automatic straight-cut band saw featuring a vertically descending and horizontally traversing saw blade; designed for series cutting of materials ranging from easy-to-machine to difficult-to-machine, including solid stock, tubes, and profiles. • Full machine enclosure • Vertically descending saw blade; selectable 0° or 1° head tilt • Hydraulic saw feed, infinitely variable Guedpfxjz Dxr Ij Angjh from 0 – 300 mm/min • Hydraulic saw blade tensioning • Double-vice system: workpiece clamped on both sides of the saw blade • Linear guides on saw head, material feed, and vice assemblies • Saw blade retraction mechanism for contact-free withdrawal of the blade from the cut channel • SpeedControl (minimum speed monitoring) • Material feed: single stroke up to 850 mm, multiple feed up to 9,999 mm, chain-cut capability down to 250 mm cut length • Control system: KASTO BasicControl with 5.4" color touchscreen