Servo motor 1.6 kW 3000 U/min

Fanuc Santenberg A06B-0227-B300 GTC S 2

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Nodexyaulspfx Ahvjwc Fanuc OiTD with Manual Guide and USB port year of manufacture 2012 8-inch chuck Spindle bore 65mm Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Nwjdsrn U H Hspfx Ahvsc Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Nwodpfxot Hwq Rj Ahvjc Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Nedpfjtzgaqjx Ahvjwc Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: good (used), Year of construction: 1996, Kuka KR200-1A Robot Year of manufacture: 1996 Reach: 2400 mm Weight: 1125 kg Payload capacity: 200 kg Hose package Controller: VKRC1 Nwedpjc Nyxhsfx Ahvsc Controller weight: 136 kg Software version: V4.1.7 (Standard Kuka) Teach pendant: Kuka KCP1 Cable set: 7 m / 15 m

Condition: good (used), These VDI 50 driven tools listed are for a SAUTER tool changer and are in good condition and fully functional. They have been used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight design, made by NACKE + WTO, VDI 50 for tool turret made by SAUTER: Item no.: XVI 24275 1 drilling/milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus VAT. VAT Item no.: XVI 24277 1 drilling milling tool, straight version, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, no. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus statutory VAT Item no.: XVI 2687 1 drilling milling tool, straight version, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT VAT Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT Nodpfobql S Hjx Ahvewc Item no.: XVI 2687 1 drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT VAT Item no.: XVI 2687 1 drilling milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2017, operating hours: 7,150 h, functionality: fully functional, GENERAL SPECIFICATION 1.1. AXES SYSTEM - Travel : o X axis: 1300 mm o Y axis : 670 mm o Z axis : 625 mm - Spindle to table surface : 150~775 mm - Motor power : o X axis : 3.0 kW o Y axis : 3.0 kW o Z axis : 3.0 Kw 1.2. CAPACITY - Table size : 1500 x 670 mm - Table surface : T-slot 5–125 x 18H8 mm Nwedpfxox Ecybo Ahvsc - Max. workpiece weight : 1300 kg - Max. workpiece height : 700 mm 1.3. SPINDLE HEAD - Motor power (Cont./30min.) : 15/18.5 kW - Max. spindle speed : 12.000 rpm (optional) - Max. torque (short term) : 117.8 N·m - Taper type : ISO # 40, 7/24 Taper 1.4. TOOL MAGAZINE - Tool storage capacity : 30 scule - Tool shank : MAS403 BT40 - Pull stud : PS806 (NIKKEN) - Maximum tool diameter : o Continuous : Ø80 mm o Adjacent pots empty: Ø125 mm - Max. tool lenght : 300 mm - Max. tool weight : 8 kg - Tool change time (Tool-to-tool) : 1,2 sec - Tool change time (Chip-to-chip) : 3,4 sec 1.5. RAPID TRAVERSE - Rapid traverse: o X, Y axis : 36 m/min o Z axis : 30 m/min - Max. Cutting feedrate :15.000 mm/min - Ballscrew (Diameter x Lead) : o X, Y axis : 40 x 12 mm o Z axis : 40 x 10 mm 1.6. ACCURACY - Positioning : ±0.005 mm - Repeatability : ± 0.002 mm 1.7. LUBRICATION UNIT - Tank capacity : 0,7l 1.8. COOLANT SYSTEM - Tank capacity : 325 l - Pump motor power : 0,4 kW - Max. flowrate: 40 l/min 1.9. DIMMENSION AND WEIGHT - Dimmensions (LxlxH) : 2597 x 3350 x 3120 mm - Weight : 8.500 kg 1.10. OTHER CHARACTERISTICS - Electrical power supply : 3Ph-AC220V/60Hz x 33,5kVA - Air power supply : 0,54 MPa x 250 Nl/min - CNC Control : Fanuc i-Series 1.11. Accessories: • TSC 20 bar • 12.000 rpm • Chip conveyor

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine Nsdpfx Ahovb Dcasvjwc - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: GLS03227, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 1,200 kg, Used, ready-to-use engine from a Sennebogen 870C. Dismantled only due to the export of the machine. Nwjdpfx Aow T Ribohvjc

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool sharpening machine Used cutting wheel sharpening machine, grinding machine, cutting wheel sharpening machine Lorenz Type MS 80, Year 1966, without coolant system, particularly suitable for sharpening gear planing wheels (cutting wheels), maximum planing wheel diameter approx. 200 mm, maximum stroke of grinding spindle slide approx. 50 mm, table clamping area approx. 600 x 245 mm, longitudinal table travel by hand 250 mm, vertical table adjustment by hand 275 mm, with coarse and fine feeds, maximum usable grinding wheel diameter 150 mm. Includes cutting wheel sharpening device MSV 75 for generating a cone-shaped surface grind on straight gear cutting wheels. Driven by a worm gear motor. Comes with operating manual. High-performance special machine for sharpening cutting wheels. Cutting wheel available at a favorable price. Njdpfx Ahoffybgjvswc Inspection under power is possible by prior appointment. Price on request / special price. All technical details subject to errors or typographical mistakes. Sale exclusively within EU countries.