20 m3 press container with tipping device

Europress CMAX

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Dljdovkn Irepfx Ab Tea

Condition: refurbished (used), Year of construction: 2018, Mobile hammer mill Mobil Flex 1000 with drum magnet and discharge belt Drive: 250 Kw electric 4-hydraulic supports for lifting the machine for transportation Total weight: 33,000 kg Rotor weight: 3,000 kg Production: up to 11 to/h (depending on material size, grid size, parameter settings) Dljdpfeph Uy Tox Ab Tea With soundproof housing Dimensions: 11,750 x 2,500 x 4,380 mm Number of hammers: 24 pcs. Hammer weight: 22 kg System is being overhauled

Condition: new, capacity 2000 kg/h power 4,0 (5,2) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 875 mm width 735 mm height 1 410 mm insertion resp. discharge height 1 510 mm weight 55 kg Dledpob Nvinofx Ab Tja material varnished steel discharge height 450 mm suitable for pomaceous fruit, turnips, potatoes, corn, etc scope of delivery schredder disc

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Dlodeh Ryc Hepfx Ab Tea Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 580 mm, spindle bore: 84 mm, turning diameter: 870 mm, Geminis lathe model GE 870 of 4000mm between points, turning on bed 870mm, turning on cross slide 580mm, turning on neckline 1100mm, length of neckline 340mm, speeds of 13-1000rpm, diameter of the hole of the shank 84mm, has mounted plate 3 claws diameter 315mm, has plate 4 independent claws of diameter 500mm, has fixed steady rests, lathe in general in good condition. Djdpfx Aswqz D Eob Tsla

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Dlodpfx Abeu Thhro Tea Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Dlsdpfxorn Swke Ab Tja Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Year of construction: 2024, operating hours: 10 h, condition: like new (used), Extrusion Line with Densifier – Ideal for Recycling Applications This robust and versatile extrusion line is perfectly suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated densifier, even materials with low bulk density – such as regrind, EPS, film scraps, and other lightweight plastic waste – can be processed efficiently. The densifier compacts the loose material and feeds it directly into the extruder, ensuring a consistent material flow and stable extrusion process even with challenging input materials. Djdpfjtziudsx Ab Tela Key Features: • Suitable for all types of polyolefins • Ideal for lightweight, bulky materials like EPS or film regrind • Efficient feeding system via integrated densifier • Compact design and easy maintenance This line is an excellent choice for recyclers, plastic processors, and compounders who require flexibility and reliable performance when working with diverse input materials.

Year of construction: 2010, condition: excellent (used), MULTIVAC T-800 ID.NO. 2569 Dodpfxopcda Rj Ab Tjla Multivac T-800 Trough sealer vacuum / gas with 2x complete tools, Tool trolley, vacuum pump, Carsö trough dispenser etc. Year mod 2010 very nice condition! Tool 215 x 167 mm No. 2. 236 x 186 mm. Dimensions line 800 x 100 H 200 cm.

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Dedpfx Abjwfunye Tjla Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 6000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 6000 mmY axis traverse: 3800 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm (direct exit)Distance between columns: 3100 mm Milling head Universal head UM40 (Body B: manual / Body C: 3º auto-indexing) Direct spindleTool clamping system: HydraulicTaper nose: ISO50 (DIN-69871)  /  Pull stud: DIN-96872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Machine weight approximate: 50000 KgMaximum weight on table: 15000 kgMachine dimensions approximate: 14740 x 5330 x 5050 mm Accesories Guarding: 2 sliding doors with a new perimetral wire-mesh safety fenceHead changer: automatic with lateral hinge/support in columnChip conveyor: 2 longitudinal palletsElectronic handwheel: New HR-510Coolant: External Internal high pressure through spindle (internal only with direct exit head) Sales conditions Guarantee: 6 months mechanical spare partsSale conditions and price: On request View all technical features