EUROPA 4-roller feed with variator

EUROPA

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. Hfsdpfx Ajy S Rqwom Aeh The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: good (used), D&K Europa System B2 Laminator Hjdjy Hgkiopfx Am Aofh The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hsdpfx Amjm Nntys Asfh Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 100motor: 11daylight: 500stroke lenght (max.): 400Tappet adjustment: 790 x 600table height: Fußboden zu Tischplatte Oberkannte - 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200Type: Hydraulic C-Frame PressCapacity: 100 tons at 230 barControl / Key Switch Modes:Setup Mode – Manual operation without light sensor Automatic Mode – Full speed with integrated light sensor Hydraulic System:Main Cylinder: Ø 230 mm Auxiliary Cylinders: 2 pcs, Ø 50 x 30 mm Auxiliary Guides: 2 pcs, Ø 50 mm Motor: 11 kW / 15 HP Pump: 16 cc, 23 L/min – Helical gear pump Speed:Approach: 110 mm/sec Return: 200 mm/sec Pressure phase: 9 mm/sec Machine Dimensions:Daylight Opening: 500 mm Hedpfxewrkcts Am Ajfh Stroke Length: 400 mm Ram Plate: 790 x 600 mm (with T-slots) Table Plate: 790 x 600 mm (with T-slots) Table Height: 850 mm (from floor to top of table) Hydraulic Equipment:REXROTH hydraulic control block & components Pressure adjustable via PLC (20 – 100 tons) Speed adjustable via PLC Air oil cooler Pre-fill valve Pressure hold valve Control System:Siemens S7-1200 PLC Main control cabinet Safety PLC (SICK) Light curtains (SICK – 700 mm) Linear encoder for stroke adjustment 10” PLC touchscreen – BEIJER (German & English) Movable two-hand control unit Ethernet connection for remote support Visual and acoustic fault alarms Dual work area lighting In full compliance with EN 693 machine safety regulations Side safety doors (outward opening) Hydraulic proportional valves Dual-channel safety control User manual & parts list (German) Oil Volume: 220 L (Tank capacity: 250 L)Total Weight: approx. 5,500 kgOverall Dimensions: 1300 x 2000 x 2750 mmColor: RAL 7035 Light Grey & RAL 7016 Anthracite Grey Besichtigung unter Strom bei uns in Böheimkirchen 3071 (Neustiftgasse 34) möglich.

Condition: as good as new (ex-display), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0153, Specification Europa VS660 Centre height 330mm Hfsdpsnxi H Uofx Am Aoh Distance between centres 1500mm Swing over bed 660mm Swing over cross slide 430mm Spindle bore (max. bar dia) 104mm Spindle nose mounting D1-11 Camlock Taper in spindle bore No. 7 Morse Swing in gap 860mm Width of bedways 480mm Total travel of cross slide 390mm Total travel of top slide 190mm Total travel of tailstock barrel 300mm Spindle speeds (infinitely variable) 18 – 1400rpm Drive vee belt and clutches Spindle motor 20HP Imperial pitches (73) 2-84TPI Diametral pitches (27) 8-72DP Metric pitches (51) 0.2 – 14mm Module pitches (20) 0.2 –3.5 MOD Approx. weight 3800 kg Machine in Imperial execution Europa VS660 Gap Bed Centre Lathe in stock in the UK Machine equipped with Fagor 2 axis DRO system with CSS ( Metric and imperial read out options) 3 jaw chuck Quick change toolpost and toolholders Rapid power traverse to saddle lighting Coolant system Chuck guard Rear splash guard

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) Hfodjwzzzfepfx Am Ash General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: excellent (used), Year of construction: 1997, Europa Centurion CU5 Ram Type Milling Machine (Like Huron) Excellent condition - we welcome any inspections! Year 1997 Specification - Table size 1635 x 460mm No of T Slots 5 Width of T slots 18mm Distance between slots 80mm Longitudinal travel 1300mm Vertical travel (knee) 440mm Cross Travel (ram) 650mm Min Spindle nose to table surface 40mm Spindle Taper 50INT No of spindle speeds 27 Spindle speed range 30-2050rpm Longitudinal powerfeed 10 - 1000mm/min Cross powerfeeds 10- 1000mm/min Vertical powerfeeds 5 - 500mm/min Longitudinal rapid feed 2800mm/min Cross rapid feed 2800mm/min Vertical rapid feed 1400mm/min Spindle motor 7.5kW Max Table load 1800kgs Hodpfjvm Abrex Am Aefh Dimensions - L 2010mm x W 2621mm x H1950mm

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Hedpjmmuq Isfx Am Aofh Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hsdpfx Ajmr Hpcjm Aefh Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, functionality: fully functional, EUROPA eturn VS390. The workhorse of any workshop or toolroom, a 390mm swing over the bed and choices of 760, 1000 or 1250mm between centres. Newall DRO and Bison Chucks are standard across the Europa Lathe Range. Machine Specification EUROPA eturn VS390 Swing over bed 390mm Hfodenzhtwjpfx Am Aeh Centre height 190mm Swing over cross slide 240mm Swing in gap 610mm Spindle Nose D1-6 (Camlock) Spindle Bore 54mm The EUROPA eturn VS390 Series is a gap bed centre lathe with a 390mm swing over the bed, 610mm in the gap and is available in three distance between centres. 750mm (30”), 1000mm (40”) and 1250mm (50”). Colchester Triumph sized machine. EEMT: Europa Energy Management Technology: The machine switches to a ‘sleep mode’ once a preset time limit has passed of inactivity. One press of a safety button and the machine is ready for operation. Reducing energy overheads. BISON: Bison 250mm dia 3 jaw scroll & 4 independent Jaw chucks with hard jaws are supplied as standard equipment. Manufactured in Europe, BISON chucks are manufactured to DIN55029, ISO702/11 standards for accuracy. NEWALL: A NEWALL NMS300 Digital Readout is professionally fitted and located on the saddle for operator ease of operation in mind. It makes so much sense, to install the DRO close to where the operator has his turning tool. The DRO travels with the machine. ELECTRONIC Variable Spindle Speed: Each model features a Schneider inverter controlling the spindle for exact turning requirements allowing you to select the correct turning speed for the job in hand. No hidden costs! Machine ready for turning: A Quick Change Toolpost complete with a set of toolholders ensures the EUROPA eturn VS lathe is supplied ‘ready for operation.’ DIN8605: An industry recognised quality standard, the entire range of EUROPA eturn VS lathes are built to the demanding toolroom standards of DIN8605