Conveyor belt 230 x 40 cm

ERC machinery L 130/100 x 40

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Ksdpfx Aowfq T Seffefa Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Kedpfxsu R Szaj Affsfa Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Year of construction: 2023, condition: new, From overproduction 9 pieces available Dim;approx 3000 x 300 x 105mm Aluminum construction: Conveyor belt width without corrugated edge PVC conveyor belt smooth conveyor belt green, 2-ply especially crosswise stable endless welded with step connection * antistatic due to threads in the fabric of the running side drive: motor approx. 0,18Kw, speed 0,3m/sec. * controllable with frequency converter Kodpfx Asff Hgaeffofa connection 220/400V, 50Hz protection class IP54 drive, motor control optional

Condition: good (used), Year of construction: 1999, Buhler BSPB TopWhite Rice Whitener Kjdpfxjul D Ruo Affjfa 1x Bühler BSPB - 630 R1 2 (Year of construction 1999) 37kW 1000rpm

Condition: new, machine/vehicle number: 190040019, Inclined conveyor belt (4,000 x 390 mm) Ksdpfxjtvfb Ne Affofa Inclined conveyor belt with direct drive and PU-PVC belt

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts Kfjdpfjdymm Hox Affja • noise prevention delivery • belt delivery

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Kodpfxehg Rcxs Affsfa Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: new, Year of construction: 2025, functionality: fully functional, conveyor belt length: 5,000 mm, conveyor belt width: 600 mm, conveyor belt speed: 1,350 mm/s, total length: 5,400 mm, total width: 1,200 mm, total height: 820 mm, overall weight: 760 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, The ASCO® CB 5000 conveyor is a robust and powerful conveyor for a wide range of transport applications. Designed for long-lasting durability and easy maintenance. Kfodpjwhm Dljfx Affoa Machine Highlights: - Hour meter - Easy belt and angle adjustment - Length extension Technical specifications for the CB 5000: - Speed: 10 - 135 cm/s - Capacity: 20 - 110 m3/h - Belt width: 0.6 m - Hopper length: 0.8 - 1.6 m - Hopper capacity: 0.2 - 0.5 m3 - Drive power: 400 V / 2.2 kW - Weight: 760 kg - Width: 1.2 m - Length: 5 m - Height: 0.82 m

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks Kfsdoh S Uhfepfx Affsa JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Year of construction: 2001, condition: excellent (used), JAROMA DCGA II LIGNUM curved edge bander Kedjgyz Rkepfx Affefa Producer JAROMA DCGA II machine model / type Year of production 2001 Machine category Edgebander Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Startup type to be agreed Description Comments Equipment: - plate - guillotine - glue spreader - clamp - feed - adjustable table at 0-45 ° - workpiece thickness 1-4cm - edge thickness 0.03-0.3cm - 2 types of feed speed 4m / min, 6m / min - 2kW motor Overall dimensions: - length 127cm - width 165cm - height 148cm - weight 300kg - used edgebander - very good condition - unpainted - Polish production - year 2001