EMBA 1600x600

EMBA

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s Bjdpezru Nzsfx Aknolp • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, EDF Flexy Feed Prefeeder Casemaker EDF 821 FD Full Servo Swing no crash feeder N. 6 colors flexo printing units from top, fixed type (they can be opened for maintenance) N. 6 infrared dryers Vacuum transport between printing units made by steel platform and belts Double-shaft slotting unit Rotary die cutter with upward disengagement for die cutting replacement when machine is running Stripper transfer unit before folder gluer Folder gluer vacuum transfer full servo controls Valco clear vision gluing unit Bljdpfx Aewhy Abjknop Counter ejector EDF Unipal palletizer with automatic sheets and pallet inserter Siemens Electronics Available August 2027

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Blsdjvy Aipjpfx Aknop Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. Bsdpfx Ajhwrhboknolp The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need fior additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Bledpfx Akoyzyhwonop Located: Europe Western Current State: In production Available: Immediately More pictures and video is available. PRICE under request.

Condition: ready for operation (used), Year of construction: 2005, spindle bore: 19 mm, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 - Maximum workpiece length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB-SPINDLE - Maximum bar diameter: 16 mm - Z-axis travel: 80 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL TURRET 1 - Number of stations: 10 - Number of live stations: 4 - Driven tool speed: 6,000 rpm FRONT TOOLING - Number of positions: 4 SUBOPERATION TOOLING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2,050 kg ACCESSORIES - Control unit: Fanuc 31i - Guide bushing Bsdpow Rcamsfx Aknolp - Parts removal - Parts ejector - Coolant tank - Bar feeder: IEMCA BOSS 332r - Electrical transformer

Condition: used, functionality: fully functional, Various used conveyor belts in stock Belt widths: between 500 and 1,200 mm Axle lengths: from 2 to 40 m For all types of mineral bulk materials Blodpfx Aswm Nibjknsp With and without supports, some with undercarriage

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Bjdjyxq Ucjpfx Aknjlp

Year of construction: 2009, condition: used, Two-color rotary flexographic printing press with integrated slotter and stacker. TECHNICAL DATA: Year of manufacture: 2009 Serial number: 0904K02 Max. speed: 70 sheets/min Economic speed: 50 sheets/min Max. sheet size: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print area: 2900 x 1900 mm Board thickness: 2-10 mm Plate thickness: 4-7 mm Axial adjustment: ± 8 mm Max. slot length: 350 mm Slot width: 7 mm Main motor: 7.5 kW Total power: 15 kW Dimensions: 6000 mm x 3050 mm x 1900 mm Bljdpfx Akehbvq Hjnsp Weight: 28000 kg DESCRIPTION: The price includes commissioning, technology transfer, training, and start-up warranty.

Condition: ready for operation (used), Year of construction: 2008, Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible. Bledsw Na Hbepfx Aknsp