TUMBLE BACK FEEDER (TBF)

Eldan

Condition: refurbished (used), Year of construction: 2016, operating hours: 3,071 h, functionality: fully functional, total length: 7,700 mm, total width: 2,300 mm, total height: 3,500 mm, overall weight: 14,000 kg, year of last overhaul: 2025, Mobile Zerkleinerungsmaschine ARJES IMPAKTOR 250 EVO - gebraucht & generalüberholt - Sofort einsatzfähig Version: Kettenlaufwerk & Hakenlift Engine: VOLVO PENTA diesel engine with 160 kW / 220 hp Emissions standard: EPA Tier 4f Transmission: Bonfiglioli Total weight 14,000 kg Total length 7,700 mm Total width 2,300 mm Total height 3,500 mm Discharge belt 800 mm Discharge height 3,450 mm Shaft length 1,500 mm Shaft diameter 680 mm Mechanically adjustable counter rake Year of last overhaul: 2025 Shafts / tools: WERT star shafts NEW (combination tool for wood, waste, light scrap) Crushing beams, screen baskets, hoppers, wear plates NEW Gujdpfxexcwfao Ag Dek Service NEW Paintwork NEW WERT GmbH is a metal construction company specializing in the development and production of twin-shaft shredding tools and machine repairs for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With our in-house design department and a highly qualified team, we offer customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual requirements of our customers through technological excellence and improvement. We serve companies from various sectors, including waste management, recycling, and mechanical engineering, and place great value on long-term partnerships. With our reliable and powerful shredding solutions, we support our customers in increasing their efficiency and competitiveness.

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules Gusdpfxjua D Alo Ag Djk purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: excellent (used), power: 115 kW (156.36 HP), fuel type: diesel, color: green, Year of construction: 2021, operating hours: 4,800 h, General information Year of manufacture: 2021 Field of application: Construction Serial number: 818.0.2803 Technical information Number of cylinders: 4 Empty weight: 19.000 kg Condition Technical condition: very good Visual appearance: very good Guodot Dluljpfx Ag Djk Financial information Price: On request Other information Emissions class: Stage V Additional information Please contact Ferdinand Pater for more information Stock no. D28 Machine Brand Sennebogen Type: 818ME-series Weight: 19 Ton Serial number: 818.0.2803 Building year: 2021 Worked hours: 4700 Engine: Cummins QSB 4.5 Stage V 115kW at 2200rpm Boom: K9 ULM, 5.3 meter boom, 3.8 meter grab stick with ULM Cabin: Maxcab, Hydraulic Cab Riser, 2,7 m. Upper carriage: Standard Sennebogen color, complete new spray paint, Central greasing system Undercarriage: Mobile, 8 full rubber tires 10,00-20 with 4 outriggers Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: excellent (used), Year of construction: 2019, operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of Manufacture: 2019 Applications: Forestry and Land Management Technical Information Power: 441 kW (600 HP) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Track Unladen weight: 26,700 kg Functional CE marking: yes Condition Gedpfx Aow Eu Aqsg Douk Technical condition: very good Visual condition: very good

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 22 kW ✔ Shaft length: 650 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x14 ✔ Granulation: 10-50 mm ✔ Capacity: up to 5 m3/h* Gusdpfxehwwpzs Ag Dek ✔ Material discharge opening: 160 mm ✔ Filling opening: 1446 x 1342 mm ✔ Dimensions L/W/H: 1,92/1,55/1,79 m ✔ Weight: 1750 kg 2 years warranty or 2000 working hours

Condition: new, Year of construction: 2025, Only one machine still available for immediate delivery! Delivery in December 2025 still possible. Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Gedpfev Rpxlex Ag Douk Requirements: Feed material should ideally be shorter than 25 mm in chip length Moisture content 6–12% (absolutely dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to run continuously for longer than 2.5 hours at a stretch, optional cooling must be installed.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, overall weight: 16,500 kg, power: 160 kW (217.54 HP), Stationary shredder KOMPTECH Crambo 3400 E Guodpfx Aev Tn Nuog Djk Electric drive: 160 kW Discharge conveyor, overband magnet, electric control cabinet.

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Godpfx Agjvnmmzj Deuk Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: excellent (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Gjdpfx Agjuu Upge Dsuk Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal. Gsdpoh Elhzofx Ag Douk